C/pointers.pdf.txt

A TUTORIAL ON POINTERS AND ARRAYS IN C  

by Ted Jensen  
Version 1.2 (PDF Version) 
Sept. 2003 
This material is hereby placed in the public domain  
Available in various formats via  
http://pweb.netcom.com/~tjensen/ptr/cpoint.htm 

TABLE OF CONTENTS 

PREFACE 

INTRODUCTION 

CHAPTER 1: What is a pointer? 

CHAPTER 2: Pointer types and Arrays 

CHAPTER 3: Pointers and Strings 

CHAPTER 4: More on Strings 

CHAPTER 5: Pointers and Structures 

CHAPTER 6: Some more on Strings, and Arrays of Strings 

CHAPTER 7: More on Multi-Dimensional Arrays 

CHAPTER 8: Pointers to Arrays 

CHAPTER 9: Pointers and Dynamic Allocation of Memory 

CHAPTER 10: Pointers to Functions 

EPILOG 

2 

4 

5 

9 

14 

19 

22 

26 

30 

32 

34 

42 

53 

1 

 
 
 
PREFACE  

This document is intended to introduce pointers to beginning programmers in the C 
programming language. Over several years of reading and contributing to various 
conferences on C including those on the FidoNet and UseNet, I have noted a large 
number of newcomers to C appear to have a difficult time in grasping the fundamentals 
of pointers. I therefore undertook the task of trying to explain them in plain language with 
lots of examples. 

The first version of this document was placed in the public domain, as is this one. It was 
picked up by Bob Stout who included it as a file called PTR-HELP.TXT in his widely 
distributed collection of SNIPPETS. Since that original 1995 release, I have added a 
significant amount of material and made some minor corrections in the original work. 

I subsequently posted an HTML version around 1998 on my website at: 

 http://pweb.netcom.com/~tjensen/ptr/cpoint.htm  

After numerous requests, I’ve finally come out with this PDF version which is identical 
to that HTML version cited above, and which can be obtained from that same web site.  

Acknowledgements:  

There are so many people who have unknowingly contributed to this work because of the 
questions they have posed in the FidoNet C Echo, or the UseNet Newsgroup 
comp.lang.c, or several other conferences in other networks, that it would be impossible 
to list them all. Special thanks go to Bob Stout who was kind enough to include the first 
version of this material in his SNIPPETS file.  

About the Author:  

Ted Jensen is a retired Electronics Engineer who worked as a hardware designer or 
manager of hardware designers in the field of magnetic recording. Programming has been 
a hobby of his off and on since 1968 when he learned how to keypunch cards for 
submission to be run on a mainframe. (The mainframe had 64K of magnetic core 
memory!).  

Use of this Material: 

Everything contained herein is hereby released to the Public Domain. Any person may 
copy or distribute this material in any manner they wish. The only thing I ask is that if 
this material is used as a teaching aid in a class, I would appreciate it if it were distributed 
in its entirety, i.e. including all chapters, the preface and the introduction. I would also 
appreciate it if, under such circumstances, the instructor of such a class would drop me a 

2 

 
note at one of the addresses below informing me of this. I have written this with the hope 
that it will be useful to others and since I'm not asking any financial remuneration, the 
only way I know that I have at least partially reached that goal is via feedback from those 
who find this material useful. 

By the way, you needn't be an instructor or teacher to contact me. I would appreciate a 
note from anyone who finds the material useful, or who has constructive criticism to 
offer. I'm also willing to answer questions submitted by email at the addresses shown 
below. 

Ted Jensen  
Redwood City, California 
tjensen@ix.netcom.com  
July 1998 

3 

 
INTRODUCTION 

If you want to be proficient in the writing of code in the C programming language, you 
must have a thorough working knowledge of how to use pointers. Unfortunately, C 
pointers appear to represent a stumbling block to newcomers, particularly those coming 
from other computer languages such as Fortran, Pascal or Basic.  

To aid those newcomers in the understanding of pointers I have written the following 
material. To get the maximum benefit from this material, I feel it is important that the 
user be able to run the code in the various listings contained in the article. I have 
attempted, therefore, to keep all code ANSI compliant so that it will work with any ANSI 
compliant compiler. I have also tried to carefully block the code within the text. That 
way, with the help of an ASCII text editor, you can copy a given block of code to a new 
file and compile it on your system. I recommend that readers do this as it will help in 
understanding the material.  

4 

 
CHAPTER 1: What is a pointer?  

One of those things beginners in C find difficult is the concept of pointers. The purpose 
of this tutorial is to provide an introduction to pointers and their use to these beginners.  

I have found that often the main reason beginners have a problem with pointers is that 
they have a weak or minimal feeling for variables, (as they are used in C). Thus we start 
with a discussion of C variables in general.  

A variable in a program is something with a name, the value of which can vary. The way 
the compiler and linker handles this is that it assigns a specific block of memory within 
the computer to hold the value of that variable. The size of that block depends on the 
range over which the variable is allowed to vary. For example, on PC's the size of an 
integer variable is 2 bytes, and that of a long integer is 4 bytes. In C the size of a variable 
type such as an integer need not be the same on all types of machines.  

When we declare a variable we inform the compiler of two things, the name of the 
variable and the type of the variable. For example, we declare a variable of type integer 
with the name k by writing:  

    int k;  

On seeing the "int" part of this statement the compiler sets aside 2 bytes of memory (on a 
PC) to hold the value of the integer. It also sets up a symbol table. In that table it adds the 
symbol k and the relative address in memory where those 2 bytes were set aside.  

Thus, later if we write:  

    k = 2;  

we expect that, at run time when this statement is executed, the value 2 will be placed in 
that memory location reserved for the storage of the value of k. In C we refer to a 
variable such as the integer k as an "object".  

In a sense there are two "values" associated with the object k. One is the value of the 
integer stored there (2 in the above example) and the other the "value" of the memory 
location, i.e., the address of k. Some texts refer to these two values with the nomenclature 
rvalue (right value, pronounced "are value") and lvalue (left value, pronounced "el 
value") respectively.  

In some languages, the lvalue is the value permitted on the left side of the assignment 
operator '=' (i.e. the address where the result of evaluation of the right side ends up). The 
rvalue is that which is on the right side of the assignment statement, the 2 above. Rvalues 
cannot be used on the left side of the assignment statement. Thus: 2 = k; is illegal.  

5 

 
Actually, the above definition of "lvalue" is somewhat modified for C. According to 
K&R II (page 197): [1]  

"An object is a named region of storage; an lvalue is an expression 
referring to an object."  

However, at this point, the definition originally cited above is sufficient. As we become 
more familiar with pointers we will go into more detail on this.  

Okay, now consider:  

   int j, k;  

    k = 2;  
    j = 7;    <-- line 1  
    k = j;    <-- line 2  

In the above, the compiler interprets the j in line 1 as the address of the variable j (its 
lvalue) and creates code to copy the value 7 to that address. In line 2, however, the j is 
interpreted as its rvalue (since it is on the right hand side of the assignment operator '='). 
That is, here the j refers to the value stored at the memory location set aside for j, in this 
case 7. So, the 7 is copied to the address designated by the lvalue of k.  

In all of these examples, we are using 2 byte integers so all copying of rvalues from one 
storage location to the other is done by copying 2 bytes. Had we been using long integers, 
we would be copying 4 bytes.  

Now, let's say that we have a reason for wanting a variable designed to hold an lvalue (an 
address). The size required to hold such a value depends on the system. On older desk top 
computers with 64K of memory total, the address of any point in memory can be 
contained in 2 bytes. Computers with more memory would require more bytes to hold an 
address. Some computers, such as the IBM PC might require special handling to hold a 
segment and offset under certain circumstances. The actual size required is not too 
important so long as we have a way of informing the compiler that what we want to store 
is an address.  

Such a variable is called a pointer variable (for reasons which hopefully will become 
clearer a little later). In C when we define a pointer variable we do so by preceding its 
name with an asterisk. In C we also give our pointer a type which, in this case, refers to 
the type of data stored at the address we will be storing in our pointer. For example, 
consider the variable declaration:  

   int *ptr; 

ptr is the name of our variable (just as k was the name of our integer variable). The '*' 
informs the compiler that we want a pointer variable, i.e. to set aside however many bytes 
is required to store an address in memory. The int says that we intend to use our pointer 

6 

 
 
variable to store the address of an integer. Such a pointer is said to "point to" an integer. 
However, note that when we wrote int k; we did not give k a value. If this definition is 
made outside of any function ANSI compliant compilers will initialize it to zero. 
Similarly, ptr has no value, that is we haven't stored an address in it in the above 
declaration. In this case, again if the declaration is outside of any function, it is initialized 
to a value guaranteed in such a way that it is guaranteed to not point to any C object or 
function. A pointer initialized in this manner is called a "null" pointer.  

The actual bit pattern used for a null pointer may or may not evaluate to zero since it 
depends on the specific system on which the code is developed. To make the source code 
compatible between various compilers on various systems, a macro is used to represent a 
null pointer. That macro goes under the name NULL. Thus, setting the value of a pointer 
using the NULL macro, as with an assignment statement such as ptr = NULL, guarantees 
that the pointer has become a null pointer. Similarly, just as one can test for an integer 
value of zero, as in if(k == 0), we can test for a null pointer using if (ptr == NULL).  

But, back to using our new variable ptr. Suppose now that we want to store in ptr the 
address of our integer variable k. To do this we use the unary & operator and write: 

    ptr = &k;  

What the & operator does is retrieve the lvalue (address) of k, even though k is on the 
right hand side of the assignment operator '=', and copies that to the contents of our 
pointer ptr. Now, ptr is said to "point to" k. Bear with us now, there is only one more 
operator we need to discuss.  

The "dereferencing operator" is the asterisk and it is used as follows:  

    *ptr = 7;  

will copy 7 to the address pointed to by ptr. Thus if ptr "points to" (contains the address 
of) k, the above statement will set the value of k to 7. That is, when we use the '*' this 
way we are referring to the value of that which ptr is pointing to, not the value of the 
pointer itself.  

Similarly, we could write:  

 printf("%d\n",*ptr);  

to print to the screen the integer value stored at the address pointed to by ptr;.  

One way to see how all this stuff fits together would be to run the following program and 
then review the code and the output carefully.  

------------ Program 1.1 ---------------------------------  

/* Program 1.1 from PTRTUT10.TXT   6/10/97 */ 

7 

 
 
 
#include <stdio.h> 

int j, k; 
int *ptr; 

int main(void) 
{ 
    j = 1; 
    k = 2; 
    ptr = &k; 
    printf("\n"); 
    printf("j has the value %d and is stored at %p\n", j, (void *)&j); 
    printf("k has the value %d and is stored at %p\n", k, (void *)&k); 
    printf("ptr has the value %p and is stored at %p\n", ptr, (void 
*)&ptr); 
    printf("The value of the integer pointed to by ptr is %d\n", *ptr); 

    return 0; 
} 

Note: We have yet to discuss those aspects of C which require the use of the (void *) 
expression used here. For now, include it in your test code. We'll explain the reason 
behind this expression later.  

To review:  

•  A variable is declared by giving it a type and a name (e.g. int k;)  
•  A pointer variable is declared by giving it a type and a name (e.g. int *ptr) where 
the asterisk tells the compiler that the variable named ptr is a pointer variable and 
the type tells the compiler what type the pointer is to point to (integer in this 
case).  

•  Once a variable is declared, we can get its address by preceding its name with the 

unary & operator, as in &k.  

•  We can "dereference" a pointer, i.e. refer to the value of that which it points to, by 

using the unary '*' operator as in *ptr.  

•  An "lvalue" of a variable is the value of its address, i.e. where it is stored in 

memory. The "rvalue" of a variable is the value stored in that variable (at that 
address).  

References for Chapter 1:  

1.  "The C Programming Language" 2nd Edition 

B. Kernighan and D. Ritchie  
Prentice Hall  
ISBN 0-13-110362-8  

8 

 
 
 
 
CHAPTER 2: Pointer types and Arrays  

Okay, let's move on. Let us consider why we need to identify the type of variable that a 
pointer points to, as in:  

     int *ptr; 

One reason for doing this is so that later, once ptr "points to" something, if we write:  

    *ptr = 2; 

the compiler will know how many bytes to copy into that memory location pointed to by 
ptr. If ptr was declared as pointing to an integer, 2 bytes would be copied, if a long, 4 
bytes would be copied. Similarly for floats and doubles the appropriate number will be 
copied. But, defining the type that the pointer points to permits a number of other 
interesting ways a compiler can interpret code. For example, consider a block in memory 
consisting if ten integers in a row. That is, 20 bytes of memory are set aside to hold 10 
integers.  

Now, let's say we point our integer pointer ptr at the first of these integers. Furthermore 
lets say that integer is located at memory location 100 (decimal). What happens when we 
write:  

    ptr + 1;  

Because the compiler "knows" this is a pointer (i.e. its value is an address) and that it 
points to an integer (its current address, 100, is the address of an integer), it adds 2 to ptr 
instead of 1, so the pointer "points to" the next integer, at memory location 102. 
Similarly, were the ptr declared as a pointer to a long, it would add 4 to it instead of 1. 
The same goes for other data types such as floats, doubles, or even user defined data 
types such as structures. This is obviously not the same kind of "addition" that we 
normally think of. In C it is referred to as addition using "pointer arithmetic", a term 
which we will come back to later.  

Similarly, since ++ptr and ptr++ are both equivalent to ptr + 1 (though the point in the 
program when ptr is incremented may be different), incrementing a pointer using the 
unary ++ operator, either pre- or post-, increments the address it stores by the amount 
sizeof(type) where "type" is the type of the object pointed to. (i.e. 2 for an integer, 4 for a 
long, etc.).  

Since a block of 10 integers located contiguously in memory is, by definition, an array of 
integers, this brings up an interesting relationship between arrays and pointers. 

9 

 
Consider the following:  

    int my_array[] = {1,23,17,4,-5,100};  

Here we have an array containing 6 integers. We refer to each of these integers by means 
of a subscript to my_array, i.e. using my_array[0] through my_array[5]. But, we could 
alternatively access them via a pointer as follows:  

    int *ptr; 
    ptr = &my_array[0];       /* point our pointer at the first 
                                 integer in our array */  

And then we could print out our array either using the array notation or by dereferencing 
our pointer. The following code illustrates this:  

-----------  Program 2.1  ----------------------------------- 

/* Program 2.1 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 

int my_array[] = {1,23,17,4,-5,100}; 
int *ptr; 

int main(void) 
{ 
    int i; 
    ptr = &my_array[0];     /* point our pointer to the first 
                                      element of the array */ 
    printf("\n\n"); 
    for (i = 0; i < 6; i++) 
    { 
      printf("my_array[%d] = %d   ",i,my_array[i]);   /*<-- A */ 
      printf("ptr + %d = %d\n",i, *(ptr + i));        /*<-- B */ 
    } 
    return 0; 
} 

Compile and run the above program and carefully note lines A and B and that the 
program prints out the same values in either case. Also observe how we dereferenced our 
pointer in line B, i.e. we first added i to it and then dereferenced the new pointer. Change 
line B to read:  

    printf("ptr + %d = %d\n",i, *ptr++); 

and run it again... then change it to:  

    printf("ptr + %d = %d\n",i, *(++ptr)); 

10 

 
  
 
 
 
 
and try once more. Each time try and predict the outcome and carefully look at the actual 
outcome.  

In C, the standard states that wherever we might use &var_name[0] we can replace that 
with var_name, thus in our code where we wrote:  

    ptr = &my_array[0]; 

we can write:  

    ptr = my_array; 

to achieve the same result.  

This leads many texts to state that the name of an array is a pointer. I prefer to mentally 
think "the name of the array is the address of first element in the array". Many beginners 
(including myself when I was learning) have a tendency to become confused by thinking 
of it as a pointer. For example, while we can write  

    ptr = my_array; 

we cannot write  

    my_array = ptr; 

The reason is that while ptr is a variable, my_array is a constant. That is, the location at 
which the first element of my_array will be stored cannot be changed once my_array[] 
has been declared.  

Earlier when discussing the term "lvalue" I cited K&R-2 where it stated:  

"An object is a named region of storage; an lvalue is an expression 
referring to an object".  

This raises an interesting problem. Since my_array is a named region of storage, why is 
my_array in the above assignment statement not an lvalue? To resolve this problem, 
some refer to my_array as an "unmodifiable lvalue".  

Modify the example program above by changing  

    ptr = &my_array[0]; 

to  

    ptr = my_array; 

and run it again to verify the results are identical.  

11 

 
Now, let's delve a little further into the difference between the names ptr and my_array 
as used above. Some writers will refer to an array's name as a constant pointer. What do 
we mean by that? Well, to understand the term "constant" in this sense, let's go back to 
our definition of the term "variable". When we declare a variable we set aside a spot in 
memory to hold the value of the appropriate type. Once that is done the name of the 
variable can be interpreted in one of two ways. When used on the left side of the 
assignment operator, the compiler interprets it as the memory location to which to move 
that value resulting from evaluation of the right side of the assignment operator. But, 
when used on the right side of the assignment operator, the name of a variable is 
interpreted to mean the contents stored at that memory address set aside to hold the value 
of that variable.  

With that in mind, let's now consider the simplest of constants, as in:  

    int i, k; 
    i = 2; 

Here, while i is a variable and then occupies space in the data portion of memory, 2 is a 
constant and, as such, instead of setting aside memory in the data segment, it is imbedded 
directly in the code segment of memory. That is, while writing something like k = i; tells 
the compiler to create code which at run time will look at memory location &i to 
determine the value to be moved to k, code created by i = 2; simply puts the 2 in the code 
and there is no referencing of the data segment. That is, both k and i are objects, but 2 is 
not an object.  

Similarly, in the above, since my_array is a constant, once the compiler establishes 
where the array itself is to be stored, it "knows" the address of my_array[0] and on 
seeing:  

    ptr = my_array; 

it simply uses this address as a constant in the code segment and there is no referencing 
of the data segment beyond that.  

This might be a good place explain further the use of the (void *) expression used in 
Program 1.1 of Chapter 1. As we have seen we can have pointers of various types. So far 
we have discussed pointers to integers and pointers to characters. In coming chapters we 
will be learning about pointers to structures and even pointer to pointers.  

Also we have learned that on different systems the size of a pointer can vary. As it turns 
out it is also possible that the size of a pointer can vary depending on the data type of the 
object to which it points. Thus, as with integers where you can run into trouble 
attempting to assign a long integer to a variable of type short integer, you can run into 
trouble attempting to assign the values of pointers of various types to pointer variables of 
other types.  

12 

 
To minimize this problem, C provides for a pointer of type void. We can declare such a 
pointer by writing:  

void *vptr; 

A void pointer is sort of a generic pointer. For example, while C will not permit the 
comparison of a pointer to type integer with a pointer to type character, for example, 
either of these can be compared to a void pointer. Of course, as with other variables, casts 
can be used to convert from one type of pointer to another under the proper 
circumstances. In Program 1.1. of Chapter 1 I cast the pointers to integers into void 
pointers to make them compatible with the %p conversion specification. In later chapters 
other casts will be made for reasons defined therein.  

Well, that's a lot of technical stuff to digest and I don't expect a beginner to understand all 
of it on first reading. With time and experimentation you will want to come back and re-
read the first 2 chapters. But for now, let's move on to the relationship between pointers, 
character arrays, and strings.  

13 

 
CHAPTER 3: Pointers and Strings  

The study of strings is useful to further tie in the relationship between pointers and arrays. 
It also makes it easy to illustrate how some of the standard C string functions can be 
implemented. Finally it illustrates how and when pointers can and should be passed to 
functions.  

In C, strings are arrays of characters. This is not necessarily true in other languages. In 
BASIC, Pascal, Fortran and various other languages, a string has its own data type. But in 
C it does not. In C a string is an array of characters terminated with a binary zero 
character (written as '\0'). To start off our discussion we will write some code which, 
while preferred for illustrative purposes, you would probably never write in an actual 
program. Consider, for example:  

    char my_string[40]; 

    my_string[0] = 'T'; 
    my_string[1] = 'e'; 
    my_string[2] = 'd': 
    my_string[3] = '\0'; 

While one would never build a string like this, the end result is a string in that it is an 
array of characters terminated with a nul character. By definition, in C, a string is an 
array of characters terminated with the nul character. Be aware that "nul" is not the same 
as "NULL". The nul refers to a zero as defined by the escape sequence '\0'. That is it 
occupies one byte of memory. NULL, on the other hand, is the name of the macro used to 
initialize null pointers. NULL is #defined in a header file in your C compiler, nul may not 
be #defined at all.  

Since writing the above code would be very time consuming, C permits two alternate 
ways of achieving the same thing. First, one might write:  

    char my_string[40] = {'T', 'e', 'd', '\0',};     

But this also takes more typing than is convenient. So, C permits:  

    char my_string[40] = "Ted"; 

When the double quotes are used, instead of the single quotes as was done in the previous 
examples, the nul character ( '\0' ) is automatically appended to the end of the string.  

In all of the above cases, the same thing happens. The compiler sets aside an contiguous 
block of memory 40 bytes long to hold characters and initialized it such that the first 4 
characters are Ted\0.  

Now, consider the following program:  

14 

 
 
------------------program 3.1------------------------------------- 

/* Program 3.1 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 

char strA[80] = "A string to be used for demonstration purposes"; 
char strB[80]; 

int main(void) 
{ 

    char *pA;     /* a pointer to type character */ 
    char *pB;     /* another pointer to type character */ 
    puts(strA);   /* show string A */ 
    pA = strA;    /* point pA at string A */ 
    puts(pA);     /* show what pA is pointing to */ 
    pB = strB;    /* point pB at string B */ 
    putchar('\n');       /* move down one line on the screen */ 
    while(*pA != '\0')   /* line A (see text) */ 
    { 
        *pB++ = *pA++;   /* line B (see text) */ 
    } 
    *pB = '\0';          /* line C (see text) */ 
    puts(strB);          /* show strB on screen */ 
    return 0; 
} 

--------- end program 3.1 ------------------------------------- 

In the above we start out by defining two character arrays of 80 characters each. Since 
these are globally defined, they are initialized to all '\0's first. Then, strA has the first 42 
characters initialized to the string in quotes.  

Now, moving into the code, we declare two character pointers and show the string on the 
screen. We then "point" the pointer pA at strA. That is, by means of the assignment 
statement we copy the address of strA[0] into our variable pA. We now use puts() to 
show that which is pointed to by pA on the screen. Consider here that the function 
prototype for puts() is:  

    int puts(const char *s);  

For the moment, ignore the const. The parameter passed to puts() is a pointer, that is the 
value of a pointer (since all parameters in C are passed by value), and the value of a 
pointer is the address to which it points, or, simply, an address. Thus when we write 
puts(strA); as we have seen, we are passing the address of strA[0].  

Similarly, when we write puts(pA); we are passing the same address, since we have set 
pA = strA;  

15 

 
 
 
 
 
 
 
 
     
Given that, follow the code down to the while() statement on line A. Line A states:  

While the character pointed to by pA (i.e. *pA) is not a nul character (i.e. the terminating 
'\0'), do the following:  

Line B states: copy the character pointed to by pA to the space pointed to by pB, then 
increment pA so it points to the next character and pB so it points to the next space.  

When we have copied the last character, pA now points to the terminating nul character 
and the loop ends. However, we have not copied the nul character. And, by definition a 
string in C must be nul terminated. So, we add the nul character with line C.  

It is very educational to run this program with your debugger while watching strA, strB, 
pA and pB and single stepping through the program. It is even more educational if 
instead of simply defining strB[] as has been done above, initialize it also with something 
like:  

    strB[80] = "12345678901234567890123456789012345678901234567890" 

where the number of digits used is greater than the length of strA and then repeat the 
single stepping procedure while watching the above variables. Give these things a try!  

Getting back to the prototype for puts() for a moment, the "const" used as a parameter 
modifier informs the user that the function will not modify the string pointed to by s, i.e. 
it will treat that string as a constant.  

Of course, what the above program illustrates is a simple way of copying a string. After 
playing with the above until you have a good understanding of what is happening, we can 
proceed to creating our own replacement for the standard strcpy() that comes with C. It 
might look like:  

   char *my_strcpy(char *destination, char *source) 
   { 
       char *p = destination; 
       while (*source != '\0') 
       { 
           *p++ = *source++; 
       } 
       *p = '\0'; 
       return destination; 
   }    

In this case, I have followed the practice used in the standard routine of returning a 
pointer to the destination.  

Again, the function is designed to accept the values of two character pointers, i.e. 
addresses, and thus in the previous program we could write:  

16 

 
    int main(void) 
    { 
        my_strcpy(strB, strA); 
        puts(strB); 
    }     

I have deviated slightly from the form used in standard C which would have the 
prototype:  

    char *my_strcpy(char *destination, const char *source);   

Here the "const" modifier is used to assure the user that the function will not modify the 
contents pointed to by the source pointer. You can prove this by modifying the function 
above, and its prototype, to include the "const" modifier as shown. Then, within the 
function you can add a statement which attempts to change the contents of that which is 
pointed to by source, such as:  

    *source = 'X'; 

which would normally change the first character of the string to an X. The const modifier 
should cause your compiler to catch this as an error. Try it and see.  

Now, let's consider some of the things the above examples have shown us. First off, 
consider the fact that *ptr++ is to be interpreted as returning the value pointed to by ptr 
and then incrementing the pointer value. This has to do with the precedence of the 
operators. Were we to write (*ptr)++ we would increment, not the pointer, but that which 
the pointer points to! i.e. if used on the first character of the above example string the 'T' 
would be incremented to a 'U'. You can write some simple example code to illustrate this.  

Recall again that a string is nothing more than an array of characters, with the last 
character being a '\0'. What we have done above is deal with copying an array. It happens 
to be an array of characters but the technique could be applied to an array of integers, 
doubles, etc. In those cases, however, we would not be dealing with strings and hence the 
end of the array would not be marked with a special value like the nul character. We 
could implement a version that relied on a special value to identify the end. For example, 
we could copy an array of positive integers by marking the end with a negative integer. 
On the other hand, it is more usual that when we write a function to copy an array of 
items other than strings we pass the function the number of items to be copied as well as 
the address of the array, e.g. something like the following prototype might indicate:  

    void int_copy(int *ptrA, int *ptrB, int nbr); 

where nbr is the number of integers to be copied. You might want to play with this idea 
and create an array of integers and see if you can write the function int_copy() and make 
it work.  

17 

 
 
This permits using functions to manipulate large arrays. For example, if we have an array 
of 5000 integers that we want to manipulate with a function, we need only pass to that 
function the address of the array (and any auxiliary information such as nbr above, 
depending on what we are doing). The array itself does not get passed, i.e. the whole 
array is not copied and put on the stack before calling the function, only its address is 
sent.  

This is different from passing, say an integer, to a function. When we pass an integer we 
make a copy of the integer, i.e. get its value and put it on the stack. Within the function 
any manipulation of the value passed can in no way effect the original integer. But, with 
arrays and pointers we can pass the address of the variable and hence manipulate the 
values of the original variables.  

18 

 
CHAPTER 4: More on Strings 

Well, we have progressed quite a way in a short time! Let's back up a little and look at 
what was done in Chapter 3 on copying of strings but in a different light. Consider the 
following function:  

    char *my_strcpy(char dest[], char source[]) 
    { 
        int i = 0; 
        while (source[i] != '\0') 
        { 
            dest[i] = source[i]; 
            i++; 
        } 
        dest[i] = '\0'; 
        return dest; 
    } 
Recall that strings are arrays of characters. Here we have chosen to use array notation 
instead of pointer notation to do the actual copying. The results are the same, i.e. the 
string gets copied using this notation just as accurately as it did before. This raises some 
interesting points which we will discuss.  

Since parameters are passed by value, in both the passing of a character pointer or the 
name of the array as above, what actually gets passed is the address of the first element of 
each array. Thus, the numerical value of the parameter passed is the same whether we use 
a character pointer or an array name as a parameter. This would tend to imply that 
somehow source[i] is the same as *(p+i).  

In fact, this is true, i.e wherever one writes a[i] it can be replaced with *(a + i) without 
any problems. In fact, the compiler will create the same code in either case. Thus we see 
that pointer arithmetic is the same thing as array indexing. Either syntax produces the 
same result.  

This is NOT saying that pointers and arrays are the same thing, they are not. We are only 
saying that to identify a given element of an array we have the choice of two syntaxes, 
one using array indexing and the other using pointer arithmetic, which yield identical 
results.  

Now, looking at this last expression, part of it.. (a + i), is a simple addition using the + 
operator and the rules of C state that such an expression is commutative. That is (a + i) is 
identical to (i + a). Thus we could write *(i + a) just as easily as *(a + i).  

19 

 
 
But *(i + a) could have come from i[a] ! From all of this comes the curious truth that if:  

    char a[20]; 
    int i; 

writing  

    a[3] = 'x'; 

is the same as writing  

    3[a] = 'x'; 

Try it! Set up an array of characters, integers or longs, etc. and assigned the 3rd or 4th 
element a value using the conventional approach and then print out that value to be sure 
you have that working. Then reverse the array notation as I have done above. A good 
compiler will not balk and the results will be identical. A curiosity... nothing more!  

Now, looking at our function above, when we write:  

    dest[i] = source[i]; 

due to the fact that array indexing and pointer arithmetic yield identical results, we can 
write this as:  

    *(dest + i) = *(source + i); 

But, this takes 2 additions for each value taken on by i. Additions, generally speaking, 
take more time than incrementations (such as those done using the ++ operator as in i++). 
This may not be true in modern optimizing compilers, but one can never be sure. Thus, 
the pointer version may be a bit faster than the array version.  

Another way to speed up the pointer version would be to change:  

    while (*source != '\0') 

to simply  

    while (*source) 

since the value within the parenthesis will go to zero (FALSE) at the same time in either 
case.  

20 

 
 
 
 
 
 
 
 
 
 
 
 
At this point you might want to experiment a bit with writing some of your own programs 
using pointers. Manipulating strings is a good place to experiment. You might want to 
write your own versions of such standard functions as:  

    strlen(); 
    strcat(); 
    strchr(); 
and any others you might have on your system.  

We will come back to strings and their manipulation through pointers in a future chapter. 
For now, let's move on and discuss structures for a bit.  

21 

 
 
 
CHAPTER 5: Pointers and Structures  

As you may know, we can declare the form of a block of data containing different data 
types by means of a structure declaration. For example, a personnel file might contain 
structures which look something like:  

    struct tag { 
        char lname[20];        /* last name */ 
        char fname[20];        /* first name */ 
        int age;               /* age */ 
        float rate;            /* e.g. 12.75 per hour */ 
    }; 

Let's say we have a bunch of these structures in a disk file and we want to read each one 
out and print out the first and last name of each one so that we can have a list of the 
people in our files. The remaining information will not be printed out. We will want to do 
this printing with a function call and pass to that function a pointer to the structure at 
hand. For demonstration purposes I will use only one structure for now. But realize the 
goal is the writing of the function, not the reading of the file which, presumably, we 
know how to do.  

For review, recall that we can access structure members with the dot operator as in:  

--------------- program 5.1 ------------------ 

/* Program 5.1 from PTRTUT10.HTM     6/13/97 */ 

#include <stdio.h> 
#include <string.h> 

struct tag { 
    char lname[20];      /* last name */ 
    char fname[20];      /* first name */ 
    int age;             /* age */ 
    float rate;          /* e.g. 12.75 per hour */ 
}; 

struct tag my_struct;       /* declare the structure my_struct */ 

int main(void) 
{ 
    strcpy(my_struct.lname,"Jensen"); 
    strcpy(my_struct.fname,"Ted"); 
    printf("\n%s ",my_struct.fname); 
    printf("%s\n",my_struct.lname); 
    return 0; 
} 

-------------- end of program 5.1 -------------- 

22 

 
 
 
 
 
 
 
 
 
Now, this particular structure is rather small compared to many used in C programs. To 
the above we might want to add:  

    date_of_hire;                  (data types not shown) 
    date_of_last_raise; 
    last_percent_increase; 
    emergency_phone; 
    medical_plan; 
    Social_S_Nbr; 
    etc..... 

If we have a large number of employees, what we want to do is manipulate the data in 
these structures by means of functions. For example we might want a function print out 
the name of the employee listed in any structure passed to it. However, in the original C 
(Kernighan & Ritchie, 1st Edition) it was not possible to pass a structure, only a pointer 
to a structure could be passed. In ANSI C, it is now permissible to pass the complete 
structure. But, since our goal here is to learn more about pointers, we won't pursue that.  

Anyway, if we pass the whole structure it means that we must copy the contents of the 
structure from the calling function to the called function. In systems using stacks, this is 
done by pushing the contents of the structure on the stack. With large structures this 
could prove to be a problem. However, passing a pointer uses a minimum amount of 
stack space.  

In any case, since this is a discussion of pointers, we will discuss how we go about 
passing a pointer to a structure and then using it within the function.  

Consider the case described, i.e. we want a function that will accept as a parameter a 
pointer to a structure and from within that function we want to access members of the 
structure. For example we want to print out the name of the employee in our example 
structure.  

Okay, so we know that our pointer is going to point to a structure declared using struct 
tag. We declare such a pointer with the declaration:  

    struct tag *st_ptr; 

and we point it to our example structure with:  

    st_ptr = &my_struct; 

Now, we can access a given member by de-referencing the pointer. But, how do we de-
reference the pointer to a structure? Well, consider the fact that we might want to use the 
pointer to set the age of the employee. We would write:  

    (*st_ptr).age = 63; 

23 

 
 
Look at this carefully. It says, replace that within the parenthesis with that which st_ptr 
points to, which is the structure my_struct. Thus, this breaks down to the same as 
my_struct.age.  

However, this is a fairly often used expression and the designers of C have created an 
alternate syntax with the same meaning which is:  

    st_ptr->age = 63; 

With that in mind, look at the following program:  

------------ program 5.2 --------------------- 

/* Program 5.2 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 
#include <string.h> 

struct tag{                     /* the structure type */ 
    char lname[20];             /* last name */ 
    char fname[20];             /* first name */ 
    int age;                    /* age */ 
    float rate;                 /* e.g. 12.75 per hour */ 
}; 

struct tag my_struct;           /* define the structure */ 
void show_name(struct tag *p);  /* function prototype */ 

int main(void) 
{ 
    struct tag *st_ptr;         /* a pointer to a structure */ 
    st_ptr = &my_struct;        /* point the pointer to my_struct */ 
    strcpy(my_struct.lname,"Jensen"); 
    strcpy(my_struct.fname,"Ted"); 
    printf("\n%s ",my_struct.fname); 
    printf("%s\n",my_struct.lname); 
    my_struct.age = 63; 
    show_name(st_ptr);          /* pass the pointer */ 
    return 0; 
} 

void show_name(struct tag *p) 
{ 
    printf("\n%s ", p->fname);  /* p points to a structure */ 
    printf("%s ", p->lname); 
    printf("%d\n", p->age); 
} 

-------------------- end of program 5.2 ---------------- 

Again, this is a lot of information to absorb at one time. The reader should compile and 
run the various code snippets and using a debugger monitor things like my_struct and p 

24 

 
 
 
 
 
 
 
 
 
 
while single stepping through the main and following the code down into the function to 
see what is happening.  

25 

 
CHAPTER 6: Some more on Strings, and Arrays of 
Strings  

Well, let's go back to strings for a bit. In the following all assignments are to be 
understood as being global, i.e. made outside of any function, including main().  

We pointed out in an earlier chapter that we could write:  

   char my_string[40] = "Ted"; 

which would allocate space for a 40 byte array and put the string in the first 4 bytes (three 
for the characters in the quotes and a 4th to handle the terminating '\0').  

Actually, if all we wanted to do was store the name "Ted" we could write:  

   char my_name[] = "Ted"; 

and the compiler would count the characters, leave room for the nul character and store 
the total of the four characters in memory the location of which would be returned by the 
array name, in this case my_name.  

In some code, instead of the above, you might see:  

   char *my_name = "Ted"; 

which is an alternate approach. Is there a difference between these? The answer is.. yes. 
Using the array notation 4 bytes of storage in the static memory block are taken up, one 
for each character and one for the terminating nul character. But, in the pointer notation 
the same 4 bytes required, plus N bytes to store the pointer variable my_name (where N 
depends on the system but is usually a minimum of 2 bytes and can be 4 or more).  

In the array notation, my_name is short for &myname[0] which is the address of the 
first element of the array. Since the location of the array is fixed during run time, this is a 
constant (not a variable). In the pointer notation my_name is a variable. As to which is 
the better method, that depends on what you are going to do within the rest of the 
program.  

Let's now go one step further and consider what happens if each of these declarations are 
done within a function as opposed to globally outside the bounds of any function.  

void my_function_A(char *ptr) 
{ 
    char a[] = "ABCDE" 
    . 
    . 
}  

26 

 
 
void my_function_B(char *ptr) 
{ 
    char *cp = "FGHIJ" 
    . 
    . 
} 

In the case of my_function_A, the content, or value(s), of the array a[] is considered to 
be the data. The array is said to be initialized to the values ABCDE. In the case of 
my_function_B, the value of the pointer cp is considered to be the data. The pointer has 
been initialized to point to the string FGHIJ. In both my_function_A and 
my_function_B the definitions are local variables and thus the string ABCDE is stored 
on the stack, as is the value of the pointer cp. The string FGHIJ can be stored anywhere. 
On my system it gets stored in the data segment.  

By the way, array initialization of automatic variables as I have done in my_function_A 
was illegal in the older K&R C and only "came of age" in the newer ANSI C. A fact that 
may be important when one is considering portability and backwards compatibility.  

As long as we are discussing the relationship/differences between pointers and arrays, 
let's move on to multi-dimensional arrays. Consider, for example the array:  

    char multi[5][10]; 

Just what does this mean? Well, let's consider it in the following light.  

    char multi[5][10]; 

Let's take the underlined part to be the "name" of an array. Then prepending the char and 
appending the [10] we have an array of 10 characters. But, the name multi[5] is itself an 
array indicating that there are 5 elements each being an array of 10 characters. Hence we 
have an array of 5 arrays of 10 characters each..  

Assume we have filled this two dimensional array with data of some kind. In memory, it 
might look as if it had been formed by initializing 5 separate arrays using something like:  

    multi[0] = {'0','1','2','3','4','5','6','7','8','9'} 
    multi[1] = {'a','b','c','d','e','f','g','h','i','j'} 
    multi[2] = {'A','B','C','D','E','F','G','H','I','J'} 
    multi[3] = {'9','8','7','6','5','4','3','2','1','0'} 
    multi[4] = {'J','I','H','G','F','E','D','C','B','A'} 

At the same time, individual elements might be addressable using syntax such as: 

    multi[0][3] = '3' 
    multi[1][7] = 'h' 
    multi[4][0] = 'J' 

27 

 
 
Since arrays are contiguous in memory, our actual memory block for the above should 
look like:  

    0123456789abcdefghijABCDEFGHIJ9876543210JIHGFEDCBA 
    ^ 
    |_____ starting at the address &multi[0][0] 

Note that I did not write multi[0] = "0123456789". Had I done so a terminating '\0' 
would have been implied since whenever double quotes are used a '\0' character is 
appended to the characters contained within those quotes. Had that been the case I would 
have had to set aside room for 11 characters per row instead of 10.  

My goal in the above is to illustrate how memory is laid out for 2 dimensional arrays. 
That is, this is a 2 dimensional array of characters, NOT an array of "strings".  

Now, the compiler knows how many columns are present in the array so it can interpret 
multi + 1 as the address of the 'a' in the 2nd row above. That is, it adds 10, the number of 
columns, to get this location. If we were dealing with integers and an array with the same 
dimension the compiler would add 10*sizeof(int) which, on my machine, would be 20. 
Thus, the address of the 9 in the 4th row above would be &multi[3][0] or *(multi + 3) in 
pointer notation. To get to the content of the 2nd element in the 4th row we add 1 to this 
address and dereference the result as in  

    *(*(multi + 3) + 1) 

With a little thought we can see that:  

    *(*(multi + row) + col)    and 
    multi[row][col]            yield the same results. 

The following program illustrates this using integer arrays instead of character arrays.  

------------------- program 6.1 ---------------------- 

/* Program 6.1 from PTRTUT10.HTM   6/13/97*/ 

#include <stdio.h> 
#define ROWS 5 
#define COLS 10 

int multi[ROWS][COLS]; 

int main(void) 
{ 
    int row, col; 
    for (row = 0; row < ROWS; row++) 
    { 
        for (col = 0; col < COLS; col++) 
        { 
            multi[row][col] = row*col; 
        } 

28 

 
 
 
 
 
    } 

    for (row = 0; row < ROWS; row++) 
    { 
        for (col = 0; col < COLS; col++) 
        { 
            printf("\n%d  ",multi[row][col]); 
            printf("%d ",*(*(multi + row) + col)); 
        } 
    } 

    return 0; 
} 
----------------- end of program 6.1 ---------------------    

Because of the double de-referencing required in the pointer version, the name of a 2 
dimensional array is often said to be equivalent to a pointer to a pointer. With a three 
dimensional array we would be dealing with an array of arrays of arrays and some might 
say its name would be equivalent to a pointer to a pointer to a pointer. However, here we 
have initially set aside the block of memory for the array by defining it using array 
notation. Hence, we are dealing with a constant, not a variable. That is we are talking 
about a fixed address not a variable pointer. The dereferencing function used above 
permits us to access any element in the array of arrays without the need of changing the 
value of that address (the address of multi[0][0] as given by the symbol multi).  

29 

 
 
 
CHAPTER 7: More on Multi-Dimensional Arrays 

In the previous chapter we noted that given  

    #define ROWS 5 
    #define COLS 10 

    int multi[ROWS][COLS]; 
we can access individual elements of the array multi using either:  

    multi[row][col] 
or  

    *(*(multi + row) + col) 

To understand more fully what is going on, let us replace  

    *(multi + row) 

with X as in:  

    *(X + col) 

Now, from this we see that X is like a pointer since the expression is de-referenced and 
we know that col is an integer. Here the arithmetic being used is of a special kind called 
"pointer arithmetic" is being used. That means that, since we are talking about an integer 
array, the address pointed to by (i.e. value of) X + col + 1 must be greater than the 
address X + col by and amount equal to sizeof(int).  

Since we know the memory layout for 2 dimensional arrays, we can determine that in the 
expression multi + row as used above, multi + row + 1 must increase by value an 
amount equal to that needed to "point to" the next row, which in this case would be an 
amount equal to COLS * sizeof(int).  

That says that if the expression *(*(multi + row) + col) is to be evaluated correctly at run 
time, the compiler must generate code which takes into consideration the value of COLS, 
i.e. the 2nd dimension. Because of the equivalence of the two forms of expression, this is 
true whether we are using the pointer expression as here or the array expression 
multi[row][col].  

Thus, to evaluate either expression, a total of 5 values must be known:  

1.  The address of the first element of the array, which is returned by the expression 

multi, i.e., the name of the array.  

2.  The size of the type of the elements of the array, in this case sizeof(int).  
3.  The 2nd dimension of the array  
4.  The specific index value for the first dimension, row in this case.  
5.  The specific index value for the second dimension, col in this case.  

30 

 
 
 
 
 
 
 
 
 
 
Given all of that, consider the problem of designing a function to manipulate the element 
values of a previously declared array. For example, one which would set all the elements 
of the array multi to the value 1.  

    void set_value(int m_array[][COLS]) 
    { 
        int row, col; 
        for (row = 0; row < ROWS; row++) 
        { 
            for (col = 0; col < COLS; col++) 
            { 
                m_array[row][col] = 1; 
            } 
        } 
    } 

And to call this function we would then use:  

    set_value(multi); 

Now, within the function we have used the values #defined by ROWS and COLS that set 
the limits on the for loops. But, these #defines are just constants as far as the compiler is 
concerned, i.e. there is nothing to connect them to the array size within the function. row 
and col are local variables, of course. The formal parameter definition permits the 
compiler to determine the characteristics associated with the pointer value that will be 
passed at run time. We really don’t need the first dimension and, as will be seen later, 
there are occasions where we would prefer not to define it within the parameter 
definition, out of habit or consistency, I have not used it here. But, the second dimension 
must be used as has been shown in the expression for the parameter. The reason is that 
we need this in the evaluation of m_array[row][col] as has been described. While the 
parameter defines the data type (int in this case) and the automatic variables for row and 
column are defined in the for loops, only one value can be passed using a single 
parameter. In this case, that is the value of multi as noted in the call statement, i.e. the 
address of the first element, often referred to as a pointer to the array. Thus, the only way 
we have of informing the compiler of the 2nd dimension is by explicitly including it in 
the parameter definition.  

In fact, in general all dimensions of higher order than one are needed when dealing with 
multi-dimensional arrays. That is if we are talking about 3 dimensional arrays, the 2nd 
and 3rd dimension must be specified in the parameter definition.  

31 

 
 
 
 
 
 
CHAPTER 8: Pointers to Arrays 

Pointers, of course, can be "pointed at" any type of data object, including arrays. While 
that was evident when we discussed program 3.1, it is important to expand on how we do 
this when it comes to multi-dimensional arrays.  

To review, in Chapter 2 we stated that given an array of integers we could point an 
integer pointer at that array using:  

    int *ptr; 
    ptr = &my_array[0];       /* point our pointer at the first 
                                 integer in our array */ 
As we stated there, the type of the pointer variable must match the type of the first 
element of the array.  

In addition, we can use a pointer as a formal parameter of a function which is designed to 
manipulate an array. e.g.  

Given:  

    int array[3] = {'1', '5', '7'}; 
    void a_func(int *p); 

Some programmers might prefer to write the function prototype as:  

   void a_func(int p[]); 

which would tend to inform others who might use this function that the function is 
designed to manipulate the elements of an array. Of course, in either case, what actually 
gets passed is the value of a pointer to the first element of the array, independent of which 
notation is used in the function prototype or definition. Note that if the array notation is 
used, there is no need to pass the actual dimension of the array since we are not passing 
the whole array, only the address to the first element.  

We now turn to the problem of the 2 dimensional array. As stated in the last chapter, C 
interprets a 2 dimensional array as an array of one dimensional arrays. That being the 
case, the first element of a 2 dimensional array of integers is a one dimensional array of 
integers. And a pointer to a two dimensional array of integers must be a pointer to that 
data type. One way of accomplishing this is through the use of the keyword "typedef". 
typedef assigns a new name to a specified data type. For example:  

    typedef unsigned char byte; 

causes the name byte to mean type unsigned char. Hence  

    byte b[10];     would be an array of unsigned characters. 

32 

 
 
 
 
 
 
Note that in the typedef declaration, the word byte has replaced that which would 
normally be the name of our unsigned char. That is, the rule for using typedef is that the 
new name for the data type is the name used in the definition of the data type. Thus in:  

    typedef int Array[10]; 

Array becomes a data type for an array of 10 integers. i.e. Array my_arr; declares 
my_arr as an array of 10 integers and Array arr2d[5]; makes arr2d an array of 5 arrays 
of 10 integers each.  

Also note that Array *p1d; makes p1d a pointer to an array of 10 integers. Because 
*p1d points to the same type as arr2d, assigning the address of the two dimensional 
array arr2d to p1d, the pointer to a one dimensional array of 10 integers is acceptable. 
i.e. p1d = &arr2d[0]; or p1d = arr2d; are both correct.  

Since the data type we use for our pointer is an array of 10 integers we would expect that 
incrementing p1d by 1 would change its value by 10*sizeof(int), which it does. That is, 
sizeof(*p1d) is 20. You can prove this to yourself by writing and running a simple short 
program.  

Now, while using typedef makes things clearer for the reader and easier on the 
programmer, it is not really necessary. What we need is a way of declaring a pointer like 
p1d without the need of the typedef keyword. It turns out that this can be done and that  

    int (*p1d)[10]; 

is the proper declaration, i.e. p1d here is a pointer to an array of 10 integers just as it was 
under the declaration using the Array type. Note that this is different from  

    int *p1d[10]; 

which would make p1d the name of an array of 10 pointers to type int.  

33 

 
 
 
 
 
 
 
CHAPTER 9: Pointers and Dynamic Allocation of 
Memory 

There are times when it is convenient to allocate memory at run time using malloc(), 
calloc(), or other allocation functions. Using this approach permits postponing the 
decision on the size of the memory block need to store an array, for example, until run 
time. Or it permits using a section of memory for the storage of an array of integers at 
one point in time, and then when that memory is no longer needed it can be freed up for 
other uses, such as the storage of an array of structures.  

When memory is allocated, the allocating function (such as malloc(), calloc(), etc.) 
returns a pointer. The type of this pointer depends on whether you are using an older 
K&R compiler or the newer ANSI type compiler. With the older compiler the type of the 
returned pointer is char, with the ANSI compiler it is void.  

If you are using an older compiler, and you want to allocate memory for an array of 
integers you will have to cast the char pointer returned to an integer pointer. For example, 
to allocate space for 10 integers we might write:  

    int *iptr; 
    iptr = (int *)malloc(10 * sizeof(int)); 
    if (iptr == NULL) 

    { .. ERROR ROUTINE GOES HERE .. } 

If you are using an ANSI compliant compiler, malloc() returns a void pointer and since a 
void pointer can be assigned to a pointer variable of any object type, the (int *) cast 
shown above is not needed. The array dimension can be determined at run time and is not 
needed at compile time. That is, the 10 above could be a variable read in from a data file 
or keyboard, or calculated based on some need, at run time.  

Because of the equivalence between array and pointer notation, once iptr has been 
assigned as above, one can use the array notation. For example, one could write:  

    int k; 
    for (k = 0; k < 10; k++) 
       iptr[k] = 2; 

to set the values of all elements to 2.  

Even with a reasonably good understanding of pointers and arrays, one place the 
newcomer to C is likely to stumble at first is in the dynamic allocation of multi-
dimensional arrays. In general, we would like to be able to access elements of such arrays 
using array notation, not pointer notation, wherever possible. Depending on the 
application we may or may not know both dimensions at compile time. This leads to a 
variety of ways to go about our task.  

34 

 
 
 
 
As we have seen, when dynamically allocating a one dimensional array its dimension can 
be determined at run time. Now, when using dynamic allocation of higher order arrays, 
we never need to know the first dimension at compile time. Whether we need to know the 
higher dimensions depends on how we go about writing the code. Here I will discuss 
various methods of dynamically allocating room for 2 dimensional arrays of integers.  

First we will consider cases where the 2nd dimension is known at compile time.  

METHOD 1: 

One way of dealing with the problem is through the use of the typedef keyword. To 
allocate a 2 dimensional array of integers recall that the following two notations result in 
the same object code being generated:  

    multi[row][col] = 1;     *(*(multi + row) + col) = 1; 

It is also true that the following two notations generate the same code:  

    multi[row]            *(multi + row) 

Since the one on the right must evaluate to a pointer, the array notation on the left must 
also evaluate to a pointer. In fact multi[0] will return a pointer to the first integer in the 
first row, multi[1] a pointer to the first integer of the second row, etc. Actually, multi[n] 
evaluates to a pointer to that array of integers that make up the n-th row of our 2 
dimensional array. That is, multi can be thought of as an array of arrays and multi[n] as 
a pointer to the n-th array of this array of arrays. Here the word pointer is being used to 
represent an address value. While such usage is common in the literature, when reading 
such statements one must be careful to distinguish between the constant address of an 
array and a variable pointer which is a data object in itself.  

Consider now:  

--------------- Program 9.1 -------------------------------- 

/* Program 9.1 from PTRTUT10.HTM  6/13/97 */ 

#include <stdio.h> 
#include <stdlib.h> 

#define COLS 5 

typedef int RowArray[COLS]; 
RowArray *rptr; 

int main(void) 
{ 
    int nrows = 10; 
    int row, col; 
    rptr = malloc(nrows * COLS * sizeof(int)); 
    for (row = 0; row < nrows; row++) 

35 

 
 
 
 
 
 
 
 
 
 
 
    { 
        for (col = 0; col < COLS; col++) 
        { 
            rptr[row][col] = 17; 
        } 
    } 

    return 0; 
} 
------------- End of Prog. 9.1 -------------------------------- 

Here I have assumed an ANSI compiler so a cast on the void pointer returned by malloc() 
is not required. If you are using an older K&R compiler you will have to cast using:  

    rptr = (RowArray *)malloc(.... etc. 

Using this approach, rptr has all the characteristics of an array name name, (except that 
rptr is modifiable), and array notation may be used throughout the rest of the program. 
That also means that if you intend to write a function to modify the array contents, you 
must use COLS as a part of the formal parameter in that function, just as we did when 
discussing the passing of two dimensional arrays to a function.  

METHOD 2: 

In the METHOD 1 above, rptr turned out to be a pointer to type "one dimensional array 
of COLS integers". It turns out that there is syntax which can be used for this type 
without the need of typedef. If we write:  

    int (*xptr)[COLS]; 

the variable xptr will have all the same characteristics as the variable rptr in METHOD 
1 above, and we need not use the typedef keyword. Here xptr is a pointer to an array of 
integers and the size of that array is given by the #defined COLS. The parenthesis 
placement makes the pointer notation predominate, even though the array notation has 
higher precedence. i.e. had we written  

    int *xptr[COLS]; 

we would have defined xptr as an array of pointers holding the number of pointers equal 
to that #defined by COLS. That is not the same thing at all. However, arrays of pointers 
have their use in the dynamic allocation of two dimensional arrays, as will be seen in the 
next 2 methods.  

METHOD 3: 

Consider the case where we do not know the number of elements in each row at compile 
time, i.e. both the number of rows and number of columns must be determined at run 
time. One way of doing this would be to create an array of pointers to type int and then 
allocate space for each row and point these pointers at each row. Consider:  

36 

 
 
 
 
 
 
 
 
 
 
-------------- Program 9.2 ------------------------------------ 

/* Program 9.2 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 
#include <stdlib.h> 

int main(void) 
{ 
    int nrows = 5;     /* Both nrows and ncols could be evaluated */ 
    int ncols = 10;    /* or read in at run time */ 
    int row; 
    int **rowptr; 
    rowptr = malloc(nrows * sizeof(int *)); 
    if (rowptr == NULL) 
    { 
        puts("\nFailure to allocate room for row pointers.\n"); 
        exit(0); 
    } 

    printf("\n\n\nIndex   Pointer(hex)   Pointer(dec)   Diff.(dec)"); 

    for (row = 0; row < nrows; row++) 
    { 
        rowptr[row] = malloc(ncols * sizeof(int)); 
        if (rowptr[row] == NULL) 
        { 
            printf("\nFailure to allocate for row[%d]\n",row); 
            exit(0); 
        } 
        printf("\n%d         %p         %d", row, rowptr[row], 
rowptr[row]); 
        if (row > 0) 
        printf("              %d",(int)(rowptr[row] - rowptr[row-1])); 
    } 

    return 0; 
} 

--------------- End 9.2 ------------------------------------ 

In the above code rowptr is a pointer to pointer to type int. In this case it points to the 
first element of an array of pointers to type int. Consider the number of calls to malloc():  

    To get the array of pointers             1     call 
    To get space for the rows                5     calls 
                                          ----- 
                     Total                   6     calls 

If you choose to use this approach note that while you can use the array notation to access 
individual elements of the array, e.g. rowptr[row][col] = 17;, it does not mean that the 
data in the "two dimensional array" is contiguous in memory.  

37 

 
 
 
 
 
 
 
 
 
 
 
 
You can, however, use the array notation just as if it were a continuous block of memory. 
For example, you can write:  

    rowptr[row][col] = 176; 

just as if rowptr were the name of a two dimensional array created at compile time. Of 
course row and col must be within the bounds of the array you have created, just as with 
an array created at compile time.  

If you want to have a contiguous block of memory dedicated to the storage of the 
elements in the array you can do it as follows:  

METHOD 4: 

In this method we allocate a block of memory to hold the whole array first. We then 
create an array of pointers to point to each row. Thus even though the array of pointers is 
being used, the actual array in memory is contiguous. The code looks like this:  

----------------- Program 9.3 ----------------------------------- 

/* Program 9.3 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 
#include <stdlib.h> 

int main(void) 
{ 
    int **rptr; 
    int *aptr; 
    int *testptr; 
    int k; 
    int nrows = 5;     /* Both nrows and ncols could be evaluated */ 
    int ncols = 8;    /* or read in at run time */ 
    int row, col; 

    /* we now allocate the memory for the array */ 

    aptr = malloc(nrows * ncols * sizeof(int)); 
    if (aptr == NULL) 
    { 
        puts("\nFailure to allocate room for the array"); 
        exit(0); 
    } 

    /* next we allocate room for the pointers to the rows */ 

    rptr = malloc(nrows * sizeof(int *)); 
    if (rptr == NULL) 
    { 
        puts("\nFailure to allocate room for pointers"); 
        exit(0); 
    } 

38 

 
 
 
 
 
 
 
 
 
 
 
    /* and now we 'point' the pointers */ 

    for (k = 0; k < nrows; k++) 
    { 
        rptr[k] = aptr + (k * ncols); 
    } 

    /* Now we illustrate how the row pointers are incremented */ 
    printf("\n\nIllustrating how row pointers are incremented"); 
    printf("\n\nIndex   Pointer(hex)  Diff.(dec)"); 

    for (row = 0; row < nrows; row++) 
    { 
        printf("\n%d         %p", row, rptr[row]); 
        if (row > 0) 
        printf("              %d",(rptr[row] - rptr[row-1])); 
    } 
    printf("\n\nAnd now we print out the array\n"); 
    for (row = 0; row < nrows; row++) 
    { 
        for (col = 0; col < ncols; col++) 
        { 
            rptr[row][col] = row + col; 
            printf("%d ", rptr[row][col]); 
        } 
        putchar('\n'); 
    } 

    puts("\n"); 

    /* and here we illustrate that we are, in fact, dealing with 
       a 2 dimensional array in a contiguous block of memory. */ 
    printf("And now we demonstrate that they are contiguous in 
memory\n"); 

    testptr = aptr; 
    for (row = 0; row < nrows; row++) 
    { 
        for (col = 0; col < ncols; col++) 
        { 
            printf("%d ", *(testptr++)); 
        } 
        putchar('\n'); 
    } 

    return 0; 
} 

------------- End Program 9.3 ----------------- 

Consider again, the number of calls to malloc()  

    To get room for the array itself      1      call 
    To get room for the array of ptrs     1      call 
                                        ---- 
                         Total            2      calls 

39 

 
 
 
 
 
 
 
 
 
 
 
Now, each call to malloc() creates additional space overhead since malloc() is generally 
implemented by the operating system forming a linked list which contains data 
concerning the size of the block. But, more importantly, with large arrays (several 
hundred rows) keeping track of what needs to be freed when the time comes can be more 
cumbersome. This, combined with the contiguousness of the data block that permits 
initialization to all zeroes using memset() would seem to make the second alternative the 
preferred one.  

As a final example on multidimensional arrays we will illustrate the dynamic allocation 
of a three dimensional array. This example will illustrate one more thing to watch when 
doing this kind of allocation. For reasons cited above we will use the approach outlined in 
alternative two. Consider the following code:  

------------------- Program 9.4 ------------------------------------- 

/* Program 9.4 from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 
#include <stdlib.h> 
#include <stddef.h> 

int X_DIM=16; 
int Y_DIM=5; 
int Z_DIM=3; 

int main(void) 
{ 
    char *space; 
    char ***Arr3D; 
    int y, z; 
    ptrdiff_t diff; 

    /* first we set aside space for the array itself */ 

    space = malloc(X_DIM * Y_DIM * Z_DIM * sizeof(char)); 

    /* next we allocate space of an array of pointers, each 
       to eventually point to the first element of a 
       2 dimensional array of pointers to pointers */ 

    Arr3D = malloc(Z_DIM * sizeof(char **)); 

    /* and for each of these we assign a pointer to a newly 
       allocated array of pointers to a row */ 

    for (z = 0; z < Z_DIM; z++) 
    { 
        Arr3D[z] = malloc(Y_DIM * sizeof(char *)); 

        /* and for each space in this array we put a pointer to 
           the first element of each row in the array space 
           originally allocated */ 

40 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
        for (y = 0; y < Y_DIM; y++) 
        { 
            Arr3D[z][y] = space + (z*(X_DIM * Y_DIM) + y*X_DIM); 
        } 
    } 

    /* And, now we check each address in our 3D array to see if 
       the indexing of the Arr3d pointer leads through in a 
       continuous manner */ 

    for (z = 0; z < Z_DIM; z++) 
    { 
        printf("Location of array %d is %p\n", z, *Arr3D[z]); 
        for ( y = 0; y < Y_DIM; y++) 
        { 
            printf("  Array %d and Row %d starts at %p", z, y, 
Arr3D[z][y]); 
            diff = Arr3D[z][y] - space; 
            printf("    diff = %d  ",diff); 
            printf(" z = %d  y = %d\n", z, y); 
        } 
    } 
    return 0; 
} 

------------------- End of Prog. 9.4 ---------------------------- 

If you have followed this tutorial up to this point you should have no problem 
deciphering the above on the basis of the comments alone. There are a couple of points 
that should be made however. Let's start with the line which reads:  

    Arr3D[z][y] = space + (z*(X_DIM * Y_DIM) + y*X_DIM); 
Note that here space is a character pointer, which is the same type as Arr3D[z][y]. It is 
important that when adding an integer, such as that obtained by evaluation of the 
expression (z*(X_DIM * Y_DIM) + y*X_DIM), to a pointer, the result is a new pointer 
value. And when assigning pointer values to pointer variables the data types of the value 
and variable must match.  

41 

 
 
 
 
 
 
 
 
CHAPTER 10: Pointers to Functions 

Up to this point we have been discussing pointers to data objects. C also permits the 
declaration of pointers to functions. Pointers to functions have a variety of uses and some 
of them will be discussed here.  

Consider the following real problem. You want to write a function that is capable of 
sorting virtually any collection of data that can be stored in an array. This might be an 
array of strings, or integers, or floats, or even structures. The sorting algorithm can be the 
same for all. For example, it could be a simple bubble sort algorithm, or the more 
complex shell or quick sort algorithm. We'll use a simple bubble sort for demonstration 
purposes.  

Sedgewick [1] has described the bubble sort using C code by setting up a function which 
when passed a pointer to the array would sort it. If we call that function bubble(), a sort 
program is described by bubble_1.c, which follows:  

/*-------------------- bubble_1.c --------------------*/ 

/* Program bubble_1.c from PTRTUT10.HTM   6/13/97 */ 

#include <stdio.h> 

int arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 

void bubble(int a[], int N); 

int main(void) 
{ 
    int i; 
    putchar('\n'); 
    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    bubble(arr,10); 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    return 0; 
} 

void bubble(int a[], int N) 
{ 
    int i, j, t; 
    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 

42 

 
 
 
 
 
 
 
 
        { 
            if (a[j-1] > a[j]) 
            { 
                t = a[j-1]; 
                a[j-1] = a[j]; 
                a[j] = t; 
            } 
        } 
    } 
} 

/*---------------------- end bubble_1.c -----------------------*/ 

The bubble sort is one of the simpler sorts. The algorithm scans the array from the second 
to the last element comparing each element with the one which precedes it. If the one that 
precedes it is larger than the current element, the two are swapped so the larger one is 
closer to the end of the array. On the first pass, this results in the largest element ending 
up at the end of the array. The array is now limited to all elements except the last and the 
process repeated. This puts the next largest element at a point preceding the largest 
element. The process is repeated for a number of times equal to the number of elements 
minus 1. The end result is a sorted array.  

Here our function is designed to sort an array of integers. Thus in line 1 we are 
comparing integers and in lines 2 through 4 we are using temporary integer storage to 
store integers. What we want to do now is see if we can convert this code so we can use 
any data type, i.e. not be restricted to integers.  

At the same time we don't want to have to analyze our algorithm and the code associated 
with it each time we use it. We start by removing the comparison from within the 
function bubble() so as to make it relatively easy to modify the comparison function 
without having to re-write portions related to the actual algorithm. This results in 
bubble_2.c:  

/*---------------------- bubble_2.c -------------------------*/ 

/* Program bubble_2.c from PTRTUT10.HTM   6/13/97 */ 

   /* Separating the comparison function */ 

#include <stdio.h> 

int arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 

void bubble(int a[], int N); 
int compare(int m, int n); 

int main(void) 
{ 
    int i; 
    putchar('\n'); 

43 

 
 
 
 
 
 
 
 
 
 
 
    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    bubble(arr,10); 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    return 0; 
} 

void bubble(int a[], int N) 

{ 
    int i, j, t; 
    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
            if (compare(a[j-1], a[j])) 
            { 
                t = a[j-1]; 
                a[j-1] = a[j]; 
                a[j] = t; 
            } 
        } 
    } 
} 

int compare(int m, int n) 
{ 
    return (m > n); 
} 
/*--------------------- end of bubble_2.c -----------------------*/ 
If our goal is to make our sort routine data type independent, one way of doing this is to 
use pointers to type void to point to the data instead of using the integer data type. As a 
start in that direction let's modify a few things in the above so that pointers can be used. 
To begin with, we'll stick with pointers to type integer.  

/*----------------------- bubble_3.c -------------------------*/ 

/* Program bubble_3.c from PTRTUT10.HTM    6/13/97 */ 

#include <stdio.h> 

int arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 

void bubble(int *p, int N); 
int compare(int *m, int *n); 

int main(void) 
{ 

44 

 
 
 
 
 
 
 
 
 
 
 
 
    int i; 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    bubble(arr,10); 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    return 0; 
} 

void bubble(int *p, int N) 
{ 
    int i, j, t; 
    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
            if (compare(&p[j-1], &p[j])) 
            { 
                t = p[j-1]; 
                p[j-1] = p[j]; 
                p[j] = t; 
            } 
        } 
    } 
} 

int compare(int *m, int *n) 
{ 
    return (*m > *n); 
} 

/*------------------ end of bubble3.c -------------------------*/ 

Note the changes. We are now passing a pointer to an integer (or array of integers) to 
bubble(). And from within bubble we are passing pointers to the elements of the array 
that we want to compare to our comparison function. And, of course we are dereferencing 
these pointer in our compare() function in order to make the actual comparison. Our next 
step will be to convert the pointers in bubble() to pointers to type void so that that 
function will become more type insensitive. This is shown in bubble_4.  

/*------------------ bubble_4.c ----------------------------*/ 

/* Program bubble_4.c from PTRTUT10,HTM   6/13/97 */ 

#include <stdio.h> 

45 

 
 
 
 
 
 
 
 
 
 
 
 
int arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 

void bubble(int *p, int N); 
int compare(void *m, void *n); 

int main(void) 
{ 
    int i; 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    bubble(arr,10); 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    return 0; 
} 

void bubble(int *p, int N) 
{ 
    int i, j, t; 
    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
            if (compare((void *)&p[j-1], (void *)&p[j])) 
            { 
                t = p[j-1]; 
                p[j-1] = p[j]; 
                p[j] = t; 
            } 
        } 
    } 
} 

int compare(void *m, void *n) 
{ 
    int *m1, *n1; 
    m1 = (int *)m; 
    n1 = (int *)n; 
    return (*m1 > *n1); 
} 

/*------------------ end of bubble_4.c ---------------------*/ 

Note that, in doing this, in compare() we had to introduce the casting of the void pointer 
types passed to the actual type being sorted. But, as we'll see later that's okay. And since 
what is being passed to bubble() is still a pointer to an array of integers, we had to cast 
these pointers to void pointers when we passed them as parameters in our call to 
compare().  

46 

 
 
 
 
 
 
 
 
 
We now address the problem of what we pass to bubble(). We want to make the first 
parameter of that function a void pointer also. But, that means that within bubble() we 
need to do something about the variable t, which is currently an integer. Also, where we 
use t = p[j-1]; the type of p[j-1] needs to be known in order to know how many bytes to 
copy to the variable t (or whatever we replace t with).  

Currently, in bubble_4.c, knowledge within bubble() as to the type of the data being 
sorted (and hence the size of each individual element) is obtained from the fact that the 
first parameter is a pointer to type integer. If we are going to be able to use bubble() to 
sort any type of data, we need to make that pointer a pointer to type void. But, in doing so 
we are going to lose information concerning the size of individual elements within the 
array. So, in bubble_5.c we will add a separate parameter to handle this size information.  

These changes, from bubble4.c to bubble5.c are, perhaps, a bit more extensive than those 
we have made in the past. So, compare the two modules carefully for differences.  

/*---------------------- bubble5.c ---------------------------*/ 

/* Program bubble_5.c from PTRTUT10.HTM    6/13/97 */ 

#include <stdio.h> 
#include <string.h> 

long arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 

void bubble(void *p, size_t width, int N); 
int compare(void *m, void *n); 

int main(void) 
{ 
    int i; 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%d ", arr[i]); 
    } 
    bubble(arr, sizeof(long), 10); 
    putchar('\n'); 

    for (i = 0; i < 10; i++) 
    { 
        printf("%ld ", arr[i]); 
    } 

    return 0; 
} 

void bubble(void *p, size_t width, int N) 
{ 
    int i, j; 
    unsigned char buf[4]; 
    unsigned char *bp = p; 

47 

 
 
 
 
 
 
 
 
 
 
    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
            if (compare((void *)(bp + width*(j-1)), 
                        (void *)(bp + j*width)))  /* 1 */ 
            { 
/*              t = p[j-1];   */ 
                memcpy(buf, bp + width*(j-1), width); 
/*              p[j-1] = p[j];   */ 
                memcpy(bp + width*(j-1), bp + j*width , width); 
/*              p[j] = t;   */ 
                memcpy(bp + j*width, buf, width); 
            } 
        } 
    } 
} 

int compare(void *m, void *n) 
{ 
    long *m1, *n1; 
    m1 = (long *)m; 
    n1 = (long *)n; 
    return (*m1 > *n1); 
} 

/*--------------------- end of bubble5.c ---------------------*/ 

Note that I have changed the data type of the array from int to long to illustrate the 
changes needed in the compare() function. Within bubble() I've done away with the 
variable t (which we would have had to change from type int to type long). I have added 
a buffer of size 4 unsigned characters, which is the size needed to hold a long (this will 
change again in future modifications to this code). The unsigned character pointer *bp is 
used to point to the base of the array to be sorted, i.e. to the first element of that array.  

We also had to modify what we passed to compare(), and how we do the swapping of 
elements that the comparison indicates need swapping. Use of memcpy() and pointer 
notation instead of array notation work towards this reduction in type sensitivity.  

Again, making a careful comparison of bubble5.c with bubble4.c can result in improved 
understanding of what is happening and why.  

We move now to bubble6.c where we use the same function bubble() that we used in 
bubble5.c to sort strings instead of long integers. Of course we have to change the 
comparison function since the means by which strings are compared is different from that 
by which long integers are compared. And,in bubble6.c we have deleted the lines within 
bubble() that were commented out in bubble5.c.  

/*--------------------- bubble6.c ---------------------*/ 
/* Program bubble_6.c from PTRTUT10.HTM   6/13/97 */ 

48 

 
 
 
 
 
 
#include <stdio.h> 
#include <string.h> 

#define MAX_BUF 256 

char arr2[5][20] = {  "Mickey Mouse", 
                      "Donald Duck", 
                      "Minnie Mouse", 
                      "Goofy", 
                      "Ted Jensen" }; 

void bubble(void *p, int width, int N); 
int compare(void *m, void *n); 

int main(void) 
{ 
    int i; 
    putchar('\n'); 

    for (i = 0; i < 5; i++) 
    { 
        printf("%s\n", arr2[i]); 
    } 
    bubble(arr2, 20, 5); 
    putchar('\n\n'); 

    for (i = 0; i < 5; i++) 
    { 
        printf("%s\n", arr2[i]); 
    } 
    return 0; 
} 

void bubble(void *p, int width, int N) 
{ 
    int i, j, k; 
    unsigned char buf[MAX_BUF]; 
    unsigned char *bp = p; 

    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
          k = compare((void *)(bp + width*(j-1)), (void *)(bp + 
j*width)); 
          if (k > 0) 
            { 
             memcpy(buf, bp + width*(j-1), width); 
             memcpy(bp + width*(j-1), bp + j*width , width); 
             memcpy(bp + j*width, buf, width); 
            } 
        } 
    } 
} 

int compare(void *m, void *n) 

49 

 
 
 
 
 
 
 
 
 
 
 
{ 
    char *m1 = m; 
    char *n1 = n; 
    return (strcmp(m1,n1)); 
} 

/*------------------- end of bubble6.c ---------------------*/ 

But, the fact that bubble() was unchanged from that used in bubble5.c indicates that that 
function is capable of sorting a wide variety of data types. What is left to do is to pass to 
bubble() the name of the comparison function we want to use so that it can be truly 
universal. Just as the name of an array is the address of the first element of the array in 
the data segment, the name of a function decays into the address of that function in the 
code segment. Thus we need to use a pointer to a function. In this case the comparison 
function.  

Pointers to functions must match the functions pointed to in the number and types of the 
parameters and the type of the return value. In our case, we declare our function pointer 
as:  

   int (*fptr)(const void *p1, const void *p2); 

Note that were we to write:  

    int *fptr(const void *p1, const void *p2); 

we would have a function prototype for a function which returned a pointer to type int. 
That is because in C the parenthesis () operator have a higher precedence than the pointer 
* operator. By putting the parenthesis around the string (*fptr) we indicate that we are 
declaring a function pointer.  

We now modify our declaration of bubble() by adding, as its 4th parameter, a function 
pointer of the proper type. It's function prototype becomes:  

    void bubble(void *p, int width, int N, 
                int(*fptr)(const void *, const void *)); 

When we call the bubble(), we insert the name of the comparison function that we want 
to use. bubble7.c illustrate how this approach permits the use of the same bubble() 
function for sorting different types of data.  

/*------------------- bubble7.c ------------------*/ 

/* Program bubble_7.c from PTRTUT10.HTM  6/10/97 */ 

#include <stdio.h> 
#include <string.h> 

#define MAX_BUF 256 

50 

 
 
 
 
 
 
 
 
 
 
 
 
 
long arr[10] = { 3,6,1,2,3,8,4,1,7,2}; 
char arr2[5][20] = {  "Mickey Mouse", 
                      "Donald Duck", 
                      "Minnie Mouse", 
                      "Goofy", 
                      "Ted Jensen" }; 

void bubble(void *p, int width, int N, 
            int(*fptr)(const void *, const void *)); 
int compare_string(const void *m, const void *n); 
int compare_long(const void *m, const void *n); 

int main(void) 
{ 
    int i; 
    puts("\nBefore Sorting:\n"); 

    for (i = 0; i < 10; i++)               /* show the long ints */ 
    { 
        printf("%ld ",arr[i]); 
    } 
    puts("\n"); 

    for (i = 0; i < 5; i++)                  /* show the strings */ 
    { 
        printf("%s\n", arr2[i]); 
    } 
    bubble(arr, 4, 10, compare_long);          /* sort the longs */ 
    bubble(arr2, 20, 5, compare_string);     /* sort the strings */ 
    puts("\n\nAfter Sorting:\n"); 

    for (i = 0; i < 10; i++)             /* show the sorted longs */ 
    { 
        printf("%d ",arr[i]); 
    } 
    puts("\n"); 

    for (i = 0; i < 5; i++)            /* show the sorted strings */ 
    { 
        printf("%s\n", arr2[i]); 
    } 
    return 0; 
} 

void bubble(void *p, int width, int N, 
            int(*fptr)(const void *, const void *)) 
{ 
    int i, j, k; 
    unsigned char buf[MAX_BUF]; 
    unsigned char *bp = p; 

    for (i = N-1; i >= 0; i--) 
    { 
        for (j = 1; j <= i; j++) 
        { 
            k = fptr((void *)(bp + width*(j-1)), (void *)(bp + 
j*width)); 

51 

 
 
 
 
 
 
 
 
 
            if (k > 0) 
            { 
                memcpy(buf, bp + width*(j-1), width); 
                memcpy(bp + width*(j-1), bp + j*width , width); 
                memcpy(bp + j*width, buf, width); 
            } 
        } 
    } 
} 

int compare_string(const void *m, const void *n) 
{ 
    char *m1 = (char *)m; 
    char *n1 = (char *)n; 
    return (strcmp(m1,n1)); 
} 

int compare_long(const void *m, const void *n) 
{ 
    long *m1, *n1; 
    m1 = (long *)m; 
    n1 = (long *)n; 
    return (*m1 > *n1); 
} 

/*----------------- end of bubble7.c -----------------*/ 

References for Chapter 10: 

1.  "Algorithms in C" 
Robert Sedgewick 
Addison-Wesley 
ISBN 0-201-51425-7 

52 

 
 
 
 
 
EPILOG  

I have written the preceding material to provide an introduction to pointers for 
newcomers to C. In C, the more one understands about pointers the greater flexibility one 
has in the writing of code. The above expands on my first effort at this which was entitled 
ptr_help.txt and found in an early version of Bob Stout's collection of C code SNIPPETS. 
The content in this version has been updated from that in PTRTUTOT.ZIP included in 
SNIP9510.ZIP.  

I am always ready to accept constructive criticism on this material, or review requests for 
the addition of other relevant material. Therefore, if you have questions, comments, 
criticisms, etc. concerning that which has been presented, I would greatly appreciate your 
contacting me via email me at tjensen@ix.netcom.com.  

53