Daily Papers

Sharing context between LLMs in a multi-model system requires the receiving model to prefill the shared prefix because KV caches are model-specific. Recent closed-form cross-model KV transfer, hereafter Full-Head Mapping, avoids this replay by fitting a training-free affine mapper from source to target caches. However, its full-head design maps each target KV head from every source KV head in the selected layers, making transfer quality sensitive to architectural differences and causing mapper storage and application cost to grow with layer support. To this end, we introduce CacheBridge, which co-designs architecture-indexed mapper support, attention-aligned calibration, and bounded mapper construction while retaining a closed-form affine interface for online deployment. CacheBridge restricts each target head to a matched source head, weights reconstruction errors by causal attention sensitivity, and uses a fused GPU kernel to construct weighted sufficient statistics without materializing full observation tensors. Across three transfer directions, CacheBridge recovers the two Ministral 3 transfer directions where Full-Head Mapping loses substantial accuracy while preserving 99.83\% mean target retention on Qwen3. On Qwen3 14Bto32B, it reduces mapper storage by 8times, accelerates application by up to 3.0times, matches \fullhead with one tenth of the calibration data, and reduces 500-sequence construction from 92.63 to 8.63 seconds (10.7times).

Affine correspondences have received significant attention due to their benefits in tasks like image matching and pose estimation. Existing methods for extracting affine correspondences still have many limitations in terms of performance; thus, exploring a new paradigm is crucial. In this paper, we present a new pipeline designed for extracting accurate affine correspondences by integrating dense matching and geometric constraints. Specifically, a novel extraction framework is introduced, with the aid of dense matching and a novel keypoint scale and orientation estimator. For this purpose, we propose loss functions based on geometric constraints, which can effectively improve accuracy by supervising neural networks to learn feature geometry. The experimental show that the accuracy and robustness of our method outperform the existing ones in image matching tasks. To further demonstrate the effectiveness of the proposed method, we applied it to relative pose estimation. Affine correspondences extracted by our method lead to more accurate poses than the baselines on a range of real-world datasets. The code is available at https://github.com/stilcrad/DenseAffine.

We consider a family of convex quadratic programs in which the coefficients of the linear objective term and the righthand side of the constraints are affine functions of a parameter. It is well known that the solution of such a parametrized quadratic program is a piecewise affine function of the parameter. The number of (polyhedral) regions in the solution map can grow exponentially in problem size, but when the number of regions is moderate, a so-called explicit solver is practical. Such a solver computes the coefficients of the affine functions and the linear inequalities defining the polyhedral regions offline; to solve a problem instance online it simply evaluates this explicit solution map. Potential advantages of an explicit solver over a more general purpose iterative solver can include transparency, interpretability, reliability, and speed. In this paper we describe how code generation can be used to automatically generate an explicit solver from a high level description of a parametrized quadratic program. Our method has been implemented in the open-source software CVXPYgen, which is part of CVXPY, a domain specific language for general convex optimization.

We propose AffineGlue, a method for joint two-view feature matching and robust estimation that reduces the combinatorial complexity of the problem by employing single-point minimal solvers. AffineGlue selects potential matches from one-to-many correspondences to estimate minimal models. Guided matching is then used to find matches consistent with the model, suffering less from the ambiguities of one-to-one matches. Moreover, we derive a new minimal solver for homography estimation, requiring only a single affine correspondence (AC) and a gravity prior. Furthermore, we train a neural network to reject ACs that are unlikely to lead to a good model. AffineGlue is superior to the SOTA on real-world datasets, even when assuming that the gravity direction points downwards. On PhotoTourism, the AUC@10{\deg} score is improved by 6.6 points compared to the SOTA. On ScanNet, AffineGlue makes SuperPoint and SuperGlue achieve similar accuracy as the detector-free LoFTR.

Tokenization is central to adapting scientific data for transformer-based foundation models, yet its impact on learned representations remains poorly understood. We compare four tokenization strategies, Affine, AIM, JetFormer, and VQ-VAE, within a unified transformer framework for astronomical imaging. Using 640,000 galaxy images from the DESI Legacy Survey and a shared AstroPT backbone, we evaluate each method on reconstruction fidelity and prediction of physical properties. Our results reveal trade-offs across approaches. The flow-based JetFormer achieves higher reconstruction quality, while VQ-VAE yields strong probe performance for galaxy physical properties. Affine and AIM better preserve localized morphological information. We find that reconstruction and representation quality are decoupled, and no single method consistently performs best across the tasks considered here. By grounding our evaluation in independently measured physical quantities, we hope this study serves to highlight the potential of scientific data as a basis for constructing interpretable benchmarks for foundation models.

High-definition (HD) map provides abundant and precise environmental information of the driving scene, serving as a fundamental and indispensable component for planning in autonomous driving system. We present MapTR, a structured end-to-end Transformer for efficient online vectorized HD map construction. We propose a unified permutation-equivalent modeling approach, i.e., modeling map element as a point set with a group of equivalent permutations, which accurately describes the shape of map element and stabilizes the learning process. We design a hierarchical query embedding scheme to flexibly encode structured map information and perform hierarchical bipartite matching for map element learning. MapTR achieves the best performance and efficiency with only camera input among existing vectorized map construction approaches on nuScenes dataset. In particular, MapTR-nano runs at real-time inference speed (25.1 FPS) on RTX 3090, 8times faster than the existing state-of-the-art camera-based method while achieving 5.0 higher mAP. Even compared with the existing state-of-the-art multi-modality method, MapTR-nano achieves 0.7 higher mAP, and MapTR-tiny achieves 13.5 higher mAP and 3times faster inference speed. Abundant qualitative results show that MapTR maintains stable and robust map construction quality in complex and various driving scenes. MapTR is of great application value in autonomous driving. Code and more demos are available at https://github.com/hustvl/MapTR.

Let S be a rational projective surface given by means of a projective rational parametrization whose base locus satisfies a mild assumption. In this paper we present an algorithm that provides three rational maps f,g,h:A^2 --to Ssubset P^n such that the union of the three images covers S. As a consequence, we present a second algorithm that generates two rational maps f,g:A^2 --to S, such that the union of their images covers the affine surface Scap A^n. In the affine case, the number of rational maps involved in the cover is in general optimal.

The inability of deep learning models to handle data drawn from unseen distributions has sparked much interest in unsupervised out-of-distribution (U-OOD) detection, as it is crucial for reliable deep learning models. Despite considerable attention, theoretically-motivated approaches are few and far between, with most methods building on top of some form of heuristic. Recently, U-OOD was formalized in the context of data invariants, allowing a clearer understanding of how to characterize U-OOD, and methods leveraging affine invariants have attained state-of-the-art results on large-scale benchmarks. Nevertheless, the restriction to affine invariants hinders the expressiveness of the approach. In this work, we broaden the affine invariants formulation to a more general case and propose a framework consisting of a normalizing flow-like architecture capable of learning non-linear invariants. Our novel approach achieves state-of-the-art results on an extensive U-OOD benchmark, and we demonstrate its further applicability to tabular data. Finally, we show our method has the same desirable properties as those based on affine invariants.

Retrieval systems rely on representations learned by increasingly powerful models. However, due to the high training cost and inconsistencies in learned representations, there is significant interest in facilitating communication between representations and ensuring compatibility across independently trained neural networks. In the literature, two primary approaches are commonly used to adapt different learned representations: affine transformations, which adapt well to specific distributions but can significantly alter the original representation, and orthogonal transformations, which preserve the original structure with strict geometric constraints but limit adaptability. A key challenge is adapting the latent spaces of updated models to align with those of previous models on downstream distributions while preserving the newly learned representation spaces. In this paper, we impose a relaxed orthogonality constraint, namely λ-Orthogonality regularization, while learning an affine transformation, to obtain distribution-specific adaptation while retaining the original learned representations. Extensive experiments across various architectures and datasets validate our approach, demonstrating that it preserves the model's zero-shot performance and ensures compatibility across model updates. Code available at: https://github.com/miccunifi/lambda_orthogonality.git{https://github.com/miccunifi/lambda\_orthogonality}.

Dense image matching establishes pixel-wise correspondences and underpins broad applications in computer vision and photogrammetry. However, extending dense matching to global-scale remote sensing remains challenging because image pairs may differ in acquisition time, season, viewpoint, spatial resolution, and land-cover state. The resulting large geometric offsets, partial overlap, and intrinsically unmatchable regions make direct dense correspondence prediction unreliable and inefficient. We thus reformulate dense matching as localization-and-registration: first localizing the matchable overlap and affine geometry, then refining dense residuals within the aligned frame. Based on this formulation, we propose LoRetta, a foundation model coupling matchability-aware affine localization with guided dense registration. We also introduce LEVIR-GM, a global-scale multi-temporal optical matching benchmark with dataset-native matchability labels (103K aligned, 827K augmented pairs, six continents, five years, 0.5-1024 m resolution). We further establish a unified evaluation protocol for sparse, semi-dense, and dense matchers. On LEVIR-GM, LoRetta achieves an area under the curve (AUC) of 83.3%, outperforming the strongest baseline RoMa v2 by 1.6 points, with larger percentage of correct keypoints (PCK) gains of 6.5 and 8.2 points at 1 and 2 pixels, while reducing inference latency by 47.8%. Astronaut-to-satellite and unmanned aerial vehicle (UAV)-to-satellite geolocalization experiments further demonstrate its transferability as a reusable geometric aligner.

Transformer attention is typically implemented using softmax normalization, which enforces attention weights with unit sum normalization. While effective in many settings, this constraint can limit flexibility in controlling attention magnitudes and may contribute to overly concentrated or unstable attention patterns during training. Prior work has explored modifications such as attention sinks or gating mechanisms, but these approaches provide only limited or indirect control over attention reweighting. We propose Affine-Scaled Attention, a simple extension to standard attention that introduces input-dependent scaling and a corresponding bias term applied to softmax-normalized attention weights. This design relaxes the strict normalization constraint while maintaining aggregation of value representations, allowing the model to adjust both the relative distribution and the scale of attention in a controlled manner. We empirically evaluate Affine-Scaled Attention in large-scale language model pretraining across multiple model sizes. Experimental results show consistent improvements in training stability, optimization behavior, and downstream task performance compared to standard softmax attention and attention sink baselines. These findings suggest that modest reweighting of attention outputs provides a practical and effective way to improve attention behavior in Transformer models.

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

We study retrieval over catalogs of structured metadata, where each record is a small schema whose fields answer different kinds of query. Embedding a record with a text encoder first serializes its fields into a string, which forces a choice of field order. We show this choice, usually treated as an implementation detail, silently controls retrieval quality once the encoder is fine-tuned. A standard fine-tune loses 7.4 nDCG@10 points when the index is rebuilt under a different field order, because it reads absolute position instead of the field labels. We propose permutation-invariant fine-tuning (PI-FT), which serializes each record under a freshly sampled field order with random field dropout, so meaning binds to the labels rather than to position. The change is about two lines in the data loader; it costs negligible in-distribution accuracy and cuts the order-change penalty to 0.2 points. We study this in the discovery of development statistics, a catalog of nearly 10,000 indicators that should be searchable in many languages by a model small enough to self-host. As AI assistants and agents increasingly mediate access to public data and statistics, this retrieval step decides whether an answer is grounded in the right indicator or series, making discoverability a precondition for disseminating data through AI. Because usage logs cannot provide training signal for indicators no one has searched, we generate the queries instead. DevDataBench is a fully LLM-generated benchmark of grounded, facet-targeted queries across 15 languages, covering every indicator for both training and evaluation. A fine-tuned 118M-parameter CPU encoder outperforms every zero-shot baseline, including text-embedding-3-large (0.707 vs.\ 0.556 nDCG@10), with the largest gains in low-resource languages. We release the benchmark, pipeline, models, and a reusable PI-FT framework.

We propose MoGe-2, an advanced open-domain geometry estimation model that recovers a metric scale 3D point map of a scene from a single image. Our method builds upon the recent monocular geometry estimation approach, MoGe, which predicts affine-invariant point maps with unknown scales. We explore effective strategies to extend MoGe for metric geometry prediction without compromising the relative geometry accuracy provided by the affine-invariant point representation. Additionally, we discover that noise and errors in real data diminish fine-grained detail in the predicted geometry. We address this by developing a unified data refinement approach that filters and completes real data from different sources using sharp synthetic labels, significantly enhancing the granularity of the reconstructed geometry while maintaining the overall accuracy. We train our model on a large corpus of mixed datasets and conducted comprehensive evaluations, demonstrating its superior performance in achieving accurate relative geometry, precise metric scale, and fine-grained detail recovery -- capabilities that no previous methods have simultaneously achieved.

Affine correspondences have traditionally been used to improve feature matching over wide baselines. While recent work has successfully used affine correspondences to solve various relative camera pose estimation problems, less attention has been given to their use in absolute pose estimation. We introduce the first general solution to the problem of estimating the pose of a calibrated camera given a single observation of an oriented point and an affine correspondence. The advantage of our approach (P1AC) is that it requires only a single correspondence, in comparison to the traditional point-based approach (P3P), significantly reducing the combinatorics in robust estimation. P1AC provides a general solution that removes restrictive assumptions made in prior work and is applicable to large-scale image-based localization. We propose a minimal solution to the P1AC problem and evaluate our novel solver on synthetic data, showing its numerical stability and performance under various types of noise. On standard image-based localization benchmarks we show that P1AC achieves more accurate results than the widely used P3P algorithm. Code for our method is available at https://github.com/jonathanventura/P1AC/ .

Vectorized high-definition map online construction has garnered considerable attention in the field of autonomous driving research. Most existing approaches model changeable map elements using a fixed number of points, or predict local maps in a two-stage autoregressive manner, which may miss essential details and lead to error accumulation. Towards precise map element learning, we propose a simple yet effective architecture named PivotNet, which adopts unified pivot-based map representations and is formulated as a direct set prediction paradigm. Concretely, we first propose a novel point-to-line mask module to encode both the subordinate and geometrical point-line priors in the network. Then, a well-designed pivot dynamic matching module is proposed to model the topology in dynamic point sequences by introducing the concept of sequence matching. Furthermore, to supervise the position and topology of the vectorized point predictions, we propose a dynamic vectorized sequence loss. Extensive experiments and ablations show that PivotNet is remarkably superior to other SOTAs by 5.9 mAP at least. The code will be available soon.

Adapting large-scale pretrained language models to downstream tasks via fine-tuning is the standard method for achieving state-of-the-art performance on NLP benchmarks. However, fine-tuning all weights of models with millions or billions of parameters is sample-inefficient, unstable in low-resource settings, and wasteful as it requires storing a separate copy of the model for each task. Recent work has developed parameter-efficient fine-tuning methods, but these approaches either still require a relatively large number of parameters or underperform standard fine-tuning. In this work, we propose Compacter, a method for fine-tuning large-scale language models with a better trade-off between task performance and the number of trainable parameters than prior work. Compacter accomplishes this by building on top of ideas from adapters, low-rank optimization, and parameterized hypercomplex multiplication layers. Specifically, Compacter inserts task-specific weight matrices into a pretrained model's weights, which are computed efficiently as a sum of Kronecker products between shared "slow" weights and "fast" rank-one matrices defined per Compacter layer. By only training 0.047% of a pretrained model's parameters, Compacter performs on par with standard fine-tuning on GLUE and outperforms standard fine-tuning on SuperGLUE and low-resource settings. Our code is publicly available at~https://github.com/rabeehk/compacter.

The clustering problem, and more generally, latent factor discovery --or latent space inference-- is formulated in terms of the Wasserstein barycenter problem from optimal transport. The objective proposed is the maximization of the variability attributable to class, further characterized as the minimization of the variance of the Wasserstein barycenter. Existing theory, which constrains the transport maps to rigid translations, is extended to affine transformations. The resulting non-parametric clustering algorithms include k-means as a special case and exhibit more robust performance. A continuous version of these algorithms discovers continuous latent variables and generalizes principal curves. The strength of these algorithms is demonstrated by tests on both artificial and real-world data sets.

A heuristic extending the Squarified Treemap technique for the representation of hierarchical information as treemaps is presented. The original technique gives high quality treemap views, since items are laid out with rectangles that approximate squares, allowing easy comparison and selection operations. New key steps, with a low computational impact, have been introduced to yield treemaps with even better aspect ratios and higher homogeneity among items.

We present MoGe, a powerful model for recovering 3D geometry from monocular open-domain images. Given a single image, our model directly predicts a 3D point map of the captured scene with an affine-invariant representation, which is agnostic to true global scale and shift. This new representation precludes ambiguous supervision in training and facilitate effective geometry learning. Furthermore, we propose a set of novel global and local geometry supervisions that empower the model to learn high-quality geometry. These include a robust, optimal, and efficient point cloud alignment solver for accurate global shape learning, and a multi-scale local geometry loss promoting precise local geometry supervision. We train our model on a large, mixed dataset and demonstrate its strong generalizability and high accuracy. In our comprehensive evaluation on diverse unseen datasets, our model significantly outperforms state-of-the-art methods across all tasks, including monocular estimation of 3D point map, depth map, and camera field of view. Code and models can be found on our project page.

Point cloud analysis is challenging due to irregularity and unordered data structure. To capture the 3D geometries, prior works mainly rely on exploring sophisticated local geometric extractors using convolution, graph, or attention mechanisms. These methods, however, incur unfavorable latency during inference, and the performance saturates over the past few years. In this paper, we present a novel perspective on this task. We notice that detailed local geometrical information probably is not the key to point cloud analysis -- we introduce a pure residual MLP network, called PointMLP, which integrates no sophisticated local geometrical extractors but still performs very competitively. Equipped with a proposed lightweight geometric affine module, PointMLP delivers the new state-of-the-art on multiple datasets. On the real-world ScanObjectNN dataset, our method even surpasses the prior best method by 3.3% accuracy. We emphasize that PointMLP achieves this strong performance without any sophisticated operations, hence leading to a superior inference speed. Compared to most recent CurveNet, PointMLP trains 2x faster, tests 7x faster, and is more accurate on ModelNet40 benchmark. We hope our PointMLP may help the community towards a better understanding of point cloud analysis. The code is available at https://github.com/ma-xu/pointMLP-pytorch.

A wide variety of deep learning techniques from style transfer to multitask learning rely on training affine transformations of features. Most prominent among these is the popular feature normalization technique BatchNorm, which normalizes activations and then subsequently applies a learned affine transform. In this paper, we aim to understand the role and expressive power of affine parameters used to transform features in this way. To isolate the contribution of these parameters from that of the learned features they transform, we investigate the performance achieved when training only these parameters in BatchNorm and freezing all weights at their random initializations. Doing so leads to surprisingly high performance considering the significant limitations that this style of training imposes. For example, sufficiently deep ResNets reach 82% (CIFAR-10) and 32% (ImageNet, top-5) accuracy in this configuration, far higher than when training an equivalent number of randomly chosen parameters elsewhere in the network. BatchNorm achieves this performance in part by naturally learning to disable around a third of the random features. Not only do these results highlight the expressive power of affine parameters in deep learning, but - in a broader sense - they characterize the expressive power of neural networks constructed simply by shifting and rescaling random features.

Sparse keypoint matching is crucial for 3D vision tasks, yet current keypoint detectors often produce spatially inaccurate matches. Existing refinement methods mitigate this issue through alignment of matched keypoint locations, but they are typically detector-specific, requiring retraining for each keypoint detector. We introduce XRefine, a novel, detector-agnostic approach for sub-pixel keypoint refinement that operates solely on image patches centered at matched keypoints. Our cross-attention-based architecture learns to predict refined keypoint coordinates without relying on internal detector representations, enabling generalization across detectors. Furthermore, XRefine can be extended to handle multi-view feature tracks. Experiments on MegaDepth, KITTI, and ScanNet demonstrate that the approach consistently improves geometric estimation accuracy, achieving superior performance compared to existing refinement methods while maintaining runtime efficiency. Our code and trained models can be found at https://github.com/boschresearch/xrefine.

Invariance and equivariance to geometrical transformations have proven to be very useful inductive biases when training (convolutional) neural network models, especially in the low-data regime. Much work has focused on the case where the symmetry group employed is compact or abelian, or both. Recent work has explored enlarging the class of transformations used to the case of Lie groups, principally through the use of their Lie algebra, as well as the group exponential and logarithm maps. The applicability of such methods to larger transformation groups is limited by the fact that depending on the group of interest G, the exponential map may not be surjective. Further limitations are encountered when G is neither compact nor abelian. Using the structure and geometry of Lie groups and their homogeneous spaces, we present a framework by which it is possible to work with such groups primarily focusing on the Lie groups G = GL^{+}(n, R) and G = SL(n, R), as well as their representation as affine transformations R^{n} rtimes G. Invariant integration as well as a global parametrization is realized by decomposing the `larger` groups into subgroups and submanifolds which can be handled individually. Under this framework, we show how convolution kernels can be parametrized to build models equivariant with respect to affine transformations. We evaluate the robustness and out-of-distribution generalisation capability of our model on the standard affine-invariant benchmark classification task, where we outperform all previous equivariant models as well as all Capsule Network proposals.

In this article, we introduce a new parameterized family of topological invariants, taking the form of candidate decompositions, for multi-parameter persistence modules. We prove that our candidate decompositions are controllable approximations: when restricting to modules that can be decomposed into interval summands, we establish theoretical results about the approximation error between our candidate decompositions and the true underlying module in terms of the standard interleaving and bottleneck distances. Moreover, even when the underlying module does not admit such a decomposition, our candidate decompositions are nonetheless stable invariants; small perturbations in the underlying module lead to small perturbations in the candidate decomposition. Then, we introduce MMA (Multipersistence Module Approximation): an algorithm for computing stable instances of such invariants, which is based on fibered barcodes and exact matchings, two constructions that stem from the theory of single-parameter persistence. By design, MMA can handle an arbitrary number of filtrations, and has bounded complexity and running time. Finally, we present empirical evidence validating the generalization capabilities and running time speed-ups of MMA on several data sets.

Autonomous driving systems require High-Definition (HD) semantic maps to navigate around urban roads. Existing solutions approach the semantic mapping problem by offline manual annotation, which suffers from serious scalability issues. Recent learning-based methods produce dense rasterized segmentation predictions to construct maps. However, these predictions do not include instance information of individual map elements and require heuristic post-processing to obtain vectorized maps. To tackle these challenges, we introduce an end-to-end vectorized HD map learning pipeline, termed VectorMapNet. VectorMapNet takes onboard sensor observations and predicts a sparse set of polylines in the bird's-eye view. This pipeline can explicitly model the spatial relation between map elements and generate vectorized maps that are friendly to downstream autonomous driving tasks. Extensive experiments show that VectorMapNet achieve strong map learning performance on both nuScenes and Argoverse2 dataset, surpassing previous state-of-the-art methods by 14.2 mAP and 14.6mAP. Qualitatively, VectorMapNet is capable of generating comprehensive maps and capturing fine-grained details of road geometry. To the best of our knowledge, VectorMapNet is the first work designed towards end-to-end vectorized map learning from onboard observations. Our project website is available at https://tsinghua-mars-lab.github.io/vectormapnet/.

Linking information across sources is fundamental to a variety of analyses in social science, business, and government. While large language models (LLMs) offer enormous promise for improving record linkage in noisy datasets, in many domains approximate string matching packages in popular softwares such as R and Stata remain predominant. These packages have clean, simple interfaces and can be easily extended to a diversity of languages. Our open-source package LinkTransformer aims to extend the familiarity and ease-of-use of popular string matching methods to deep learning. It is a general purpose package for record linkage with transformer LLMs that treats record linkage as a text retrieval problem. At its core is an off-the-shelf toolkit for applying transformer models to record linkage with four lines of code. LinkTransformer contains a rich repository of pre-trained transformer semantic similarity models for multiple languages and supports easy integration of any transformer language model from Hugging Face or OpenAI. It supports standard functionality such as blocking and linking on multiple noisy fields. LinkTransformer APIs also perform other common text data processing tasks, e.g., aggregation, noisy de-duplication, and translation-free cross-lingual linkage. Importantly, LinkTransformer also contains comprehensive tools for efficient model tuning, to facilitate different levels of customization when off-the-shelf models do not provide the required accuracy. Finally, to promote reusability, reproducibility, and extensibility, LinkTransformer makes it easy for users to contribute their custom-trained models to its model hub. By combining transformer language models with intuitive APIs that will be familiar to many users of popular string matching packages, LinkTransformer aims to democratize the benefits of LLMs among those who may be less familiar with deep learning frameworks.

Land Use and Land Cover (LULC) mapping is a fundamental task in Earth Observation (EO). However, current LULC models are typically developed for a specific modality and a fixed class taxonomy, limiting their generability and broader applicability. Recent advances in foundation models (FMs) offer promising opportunities for building universal models. Yet, task-agnostic FMs often require fine-tuning for downstream applications, whereas task-specific FMs rely on massive amounts of labeled data for training, which is costly and impractical in the remote sensing (RS) domain. To address these challenges, we propose LandSegmenter, an LULC FM framework that resolves three-stage challenges at the input, model, and output levels. From the input side, to alleviate the heavy demand on labeled data for FM training, we introduce LAnd Segment (LAS), a large-scale, multi-modal, multi-source dataset built primarily with globally sampled weak labels from existing LULC products. LAS provides a scalable, cost-effective alternative to manual annotation, enabling large-scale FM training across diverse LULC domains. For model architecture, LandSegmenter integrates an RS-specific adapter for cross-modal feature extraction and a text encoder for semantic awareness enhancement. At the output stage, we introduce a class-wise confidence-guided fusion strategy to mitigate semantic omissions and further improve LandSegmenter's zero-shot performance. We evaluate LandSegmenter on six precisely annotated LULC datasets spanning diverse modalities and class taxonomies. Extensive transfer learning and zero-shot experiments demonstrate that LandSegmenter achieves competitive or superior performance, particularly in zero-shot settings when transferred to unseen datasets. These results highlight the efficacy of our proposed framework and the utility of weak supervision for building task-specific FMs.

The rapid development of large language models has revolutionized natural language processing, but their fine-tuning remains computationally expensive, hindering broad deployment. Parameter-efficient fine-tuning (PEFT) methods, such as LoRA, have emerged as solutions. Recent work like DoRA attempts to further decompose weight adaptation into direction and magnitude components. However, existing formulations often define direction heuristically at the column level, lacking a principled geometric foundation. In this paper, we propose MAP, a novel framework that reformulates weight matrices as high-dimensional vectors and decouples their adaptation into direction and magnitude in a rigorous manner. MAP normalizes the pre-trained weights, learns a directional update, and introduces two scalar coefficients to independently scale the magnitude of the base and update vectors. This design enables more interpretable and flexible adaptation, and can be seamlessly integrated into existing PEFT methods. Extensive experiments show that MAP significantly improves performance when coupling with existing methods, offering a simple yet powerful enhancement to existing PEFT methods. Given the universality and simplicity of MAP, we hope it can serve as a default setting for designing future PEFT methods.

This monograph develops a unified account of training and inference in Power Law Decoder Representation language models (PLDR-LLMs). Exact finite work identities decompose changes in the absolute energy of the row-centered learned map into parameter contributions, signed interactions, and numerical observation defects. Positive affine blocking retains restarts at the row-constant face, while the augmented AdamW state supplies the complete dynamical description. Predictive renormalization acts on the complete conditional training law for a single pass over distinct corpus target blocks, retaining optimizer memory, remaining data, schedule, and numerical policy. Autonomous reductions require closure; approximate reductions carry successor and emission errors. Finite-population covariance, matched physical clocks, matrix fluxes, and signed temporal energy connect row dynamics to model-wide observations. Absolute row collapse, relative row concentration, operator stabilization, and predictive accuracy are distinguished. Experiments reveal observer and optimizer dependence, reject the tested autonomous row-state candidates, and support finite conditional prediction and state-specific operator reduction. Independent single-pass families exhibit moving finite fluctuation regions without establishing a thermodynamic critical class. Conditional symmetry, head limits, covariance flows, and readout error budgets specify assumptions needed to transfer scaling laws to inference. The theory separates exact identities, conditional dynamical claims, and finite empirical findings, with proofs, selected formal checks, and compact numerical evidence.

Agentic reinforcement learning (RL) disaggregates training from rollout, so each policy update must reach the rollout clusters before the next batch. Transferring a full 1T checkpoint for such weight synchronization (refit) takes 87.5 min between two AWS regions. Measurements of BF16 training show that about 1% of weights change their stored values per step. Recent systems exploit this sparsity but fall short on placement, exactness, or efficiency: they reimplement placement rules, assemble full tensors, rebuild values arithmetically, or use a cross-cluster collective, and none fully recovers from mid-refit failures. We present NeMo-DCR (Delta-Compressed Refit), which sends only changes yet is bit-exact: receivers obtain the same parameter and buffer bits as a dense refit. For placement, fixed affine mappings project changes from training shards into the checkpoint's canonical coordinates, residual conversion covers the other changes, and the serving runtime's native loader places all changes in receiver storage. For exactness, compressible XOR masks carry affine changes whose projection and loader preserve stored bits, and overwrites carry the others. Receivers apply both in place, retries overwrite partial writes, and a joint commit binds the policy to the baseline for the next delta. For efficiency, object storage or a relay tree streams payloads during delta construction, without a cross-cluster collective. Even at 3% and 5% change rates, NeMo-DCR refits of 30B-1T models are 12-40times faster than a transport-only full-checkpoint reference. A 1T relay-tree refit at 3% takes 150 s instead of 87.5 min, making refits practical for cross-cluster agentic RL at trillion-parameter scale.

Electronic maps consist of diverse entities, such as points of interest (POIs), road networks, and land parcels, playing a vital role in applications like ITS and LBS. Map entity representation learning (MapRL) generates versatile and reusable data representations, providing essential tools for efficiently managing and utilizing map entity data. Despite the progress in MapRL, two key challenges constrain further development. First, existing research is fragmented, with models classified by the type of map entity, limiting the reusability of techniques across different tasks. Second, the lack of unified benchmarks makes systematic evaluation and comparison of models difficult. To address these challenges, we propose a novel taxonomy for MapRL that organizes models based on functional module-such as encoders, pre-training tasks, and downstream tasks-rather than by entity type. Building on this taxonomy, we present a taxonomy-driven library, VecCity, which offers easy-to-use interfaces for encoding, pre-training, fine-tuning, and evaluation. The library integrates datasets from nine cities and reproduces 21 mainstream MapRL models, establishing the first standardized benchmarks for the field. VecCity also allows users to modify and extend models through modular components, facilitating seamless experimentation. Our comprehensive experiments cover multiple types of map entities and evaluate 21 VecCity pre-built models across various downstream tasks. Experimental results demonstrate the effectiveness of VecCity in streamlining model development and provide insights into the impact of various components on performance. By promoting modular design and reusability, VecCity offers a unified framework to advance research and innovation in MapRL. The code is available at https://github.com/Bigscity-VecCity/VecCity.

Many recently trained neural networks employ large numbers of parameters to achieve good performance. One may intuitively use the number of parameters required as a rough gauge of the difficulty of a problem. But how accurate are such notions? How many parameters are really needed? In this paper we attempt to answer this question by training networks not in their native parameter space, but instead in a smaller, randomly oriented subspace. We slowly increase the dimension of this subspace, note at which dimension solutions first appear, and define this to be the intrinsic dimension of the objective landscape. The approach is simple to implement, computationally tractable, and produces several suggestive conclusions. Many problems have smaller intrinsic dimensions than one might suspect, and the intrinsic dimension for a given dataset varies little across a family of models with vastly different sizes. This latter result has the profound implication that once a parameter space is large enough to solve a problem, extra parameters serve directly to increase the dimensionality of the solution manifold. Intrinsic dimension allows some quantitative comparison of problem difficulty across supervised, reinforcement, and other types of learning where we conclude, for example, that solving the inverted pendulum problem is 100 times easier than classifying digits from MNIST, and playing Atari Pong from pixels is about as hard as classifying CIFAR-10. In addition to providing new cartography of the objective landscapes wandered by parameterized models, the method is a simple technique for constructively obtaining an upper bound on the minimum description length of a solution. A byproduct of this construction is a simple approach for compressing networks, in some cases by more than 100 times.

Mapping and navigation services like Google Maps, Apple Maps, Openstreet Maps, are essential for accessing various location-based data, yet they often struggle to handle natural language geospatial queries. Recent advancements in Large Language Models (LLMs) show promise in question answering (QA), but creating reliable geospatial QA datasets from map services remains challenging. We introduce MapQaTor, a web application that streamlines the creation of reproducible, traceable map-based QA datasets. With its plug-and-play architecture, MapQaTor enables seamless integration with any maps API, allowing users to gather and visualize data from diverse sources with minimal setup. By caching API responses, the platform ensures consistent ground truth, enhancing the reliability of the data even as real-world information evolves. MapQaTor centralizes data retrieval, annotation, and visualization within a single platform, offering a unique opportunity to evaluate the current state of LLM-based geospatial reasoning while advancing their capabilities for improved geospatial understanding. Evaluation metrics show that, MapQaTor speeds up the annotation process by at least 30 times compared to manual methods, underscoring its potential for developing geospatial resources, such as complex map reasoning datasets. The website is live at: https://mapqator.github.io/ and a demo video is available at: https://youtu.be/7_aV9Wmhs6Q.

Planning records define restrictions over geographic areas, but their source documents often provide only indirect spatial evidence rather than machine-readable boundaries. We introduce Plan2Map, a 208-case multimodal benchmark for document-grounded geospatial boundary reconstruction from UK planning records. Given only a source planning document, systems must reconstruct a valid geospatial boundary from notice text, schedules, map plates, map labels, and boundary annotations; the reference GeoJSON is held out for scoring. We propose GeoPlanAgent, a document-grounded, geospatial-tool-in-the-loop system that decomposes the task into evidence extraction, localisation, map registration, boundary segmentation, projection, and verification. On Plan2Map, GeoPlanAgent achieves 0.736 mean IoU and 0.904 median IoU, with 67.8\% of predictions at or above 0.8 IoU, substantially outperforming direct VLM-to-GeoJSON baselines. Diagnostic analysis shows that direct VLM prediction remains unreliable, while remaining errors are concentrated in localisation and map registration, and supervised boundary segmentation substantially improves pixel-level mask quality. Plan2Map provides a concrete testbed for multimodal geospatial reconstruction from public planning records. Project page: https://odeb1.github.io/Plan2Map_Project_Page/.

Document rectification in real-world scenarios poses significant challenges due to extreme variations in camera perspectives and physical distortions. Driven by the insight that complex transformations can be decomposed and resolved progressively, we introduce a novel multi-stage framework that progressively reverses distinct distortion types in a coarse-to-fine manner. Specifically, our framework first performs a global affine transformation to correct perspective distortions arising from the camera's viewpoint, then rectifies geometric deformations resulting from physical paper curling and folding, and finally employs a content-aware iterative process to eliminate fine-grained content distortions. To address limitations in existing evaluation protocols, we also propose two enhanced metrics: layout-aligned OCR metrics (AED/ACER) for a stable assessment that decouples geometric rectification quality from the layout analysis errors of OCR engines, and masked AD/AAD (AD-M/AAD-M) tailored for accurately evaluating geometric distortions in documents with incomplete boundaries. Extensive experiments show that our method establishes new state-of-the-art performance on multiple challenging benchmarks, yielding a substantial reduction of 14.1\%--34.7\% in the AAD metric and demonstrating superior efficacy in real-world applications. The code will be publicly available at https://github.com/chaoyunwang/ArbDR.

Large language models (LLMs) have recently shown strong potential for ranking by capturing semantic relevance and adapting across diverse domains, yet existing methods remain constrained by limited context length and high computational costs, restricting their applicability to real-world scenarios where candidate pools often scale to millions. To address this challenge, we propose LRanker, a framework tailored for large-candidate ranking. LRanker incorporates a candidate aggregation encoder that leverages K-means clustering to explicitly model global candidate information, and a graph-based test-time scaling mechanism that partitions candidates into subsets, generates multiple query embeddings, and integrates them through an ensemble procedure. By aggregating diverse embeddings instead of relying on a single representation, this mechanism enhances robustness and expressiveness, leading to more accurate ranking over massive candidate pools. We evaluate LRanker on seven tasks across three scenarios in RBench with different candidate scales. Experimental results show that LRanker achieves over 30% gains in the RBench-Small scenario, improves by 3-9% in MRR in the RBench-Large scenario, and sustains scalability with 20-30% improvements in the RBench-Ultra scenario with more than 6.8M candidates. Ablation studies further verify the effectiveness of its key components. Together, these findings demonstrate the robustness, scalability, and effectiveness of LRanker for massive-candidate ranking.

Autonomous driving for urban and highway driving applications often requires High Definition (HD) maps to generate a navigation plan. Nevertheless, various challenges arise when generating and maintaining HD maps at scale. While recent online mapping methods have started to emerge, their performance especially for longer ranges is limited by heavy occlusion in dynamic environments. With these considerations in mind, our work focuses on leveraging lightweight and scalable priors-Standard Definition (SD) maps-in the development of online vectorized HD map representations. We first examine the integration of prototypical rasterized SD map representations into various online mapping architectures. Furthermore, to identify lightweight strategies, we extend the OpenLane-V2 dataset with OpenStreetMaps and evaluate the benefits of graphical SD map representations. A key finding from designing SD map integration components is that SD map encoders are model agnostic and can be quickly adapted to new architectures that utilize bird's eye view (BEV) encoders. Our results show that making use of SD maps as priors for the online mapping task can significantly speed up convergence and boost the performance of the online centerline perception task by 30% (mAP). Furthermore, we show that the introduction of the SD maps leads to a reduction of the number of parameters in the perception and reasoning task by leveraging SD map graphs while improving the overall performance. Project Page: https://henryzhangzhy.github.io/sdhdmap/.

Autonomous vehicles rely on HD maps for their operation, but offline HD maps eventually become outdated. For this reason, online HD map construction methods use live sensor data to infer map information instead. Research on real map changes shows that oftentimes entire parts of an HD map remain unchanged and can be used as a prior. We therefore introduce M3TR (Multi-Masking Map Transformer), a generalist approach for HD map completion both with and without offline HD map priors. As a necessary foundation, we address shortcomings in ground truth labels for Argoverse 2 and nuScenes and propose the first comprehensive benchmark for HD map completion. Unlike existing models that specialize in a single kind of map change, which is unrealistic for deployment, our Generalist model handles all kinds of changes, matching the effectiveness of Expert models. With our map masking as augmentation regime, we can even achieve a +1.4 mAP improvement without a prior. Finally, by fully utilizing prior HD map elements and optimizing query designs, M3TR outperforms existing methods by +4.3 mAP while being the first real-world deployable model for offline HD map priors. Code is available at https://github.com/immel-f/m3tr

Very-High Resolution (VHR) remote sensing imagery is increasingly accessible, but often lacks annotations for effective machine learning applications. Recent foundation models like GroundingDINO and Segment Anything (SAM) provide opportunities to automatically generate annotations. This study introduces FMARS (Foundation Model Annotations in Remote Sensing), a methodology leveraging VHR imagery and foundation models for fast and robust annotation. We focus on disaster management and provide a large-scale dataset with labels obtained from pre-event imagery over 19 disaster events, derived from the Maxar Open Data initiative. We train segmentation models on the generated labels, using Unsupervised Domain Adaptation (UDA) techniques to increase transferability to real-world scenarios. Our results demonstrate the effectiveness of leveraging foundation models to automatically annotate remote sensing data at scale, enabling robust downstream models for critical applications. Code and dataset are available at https://github.com/links-ads/igarss-fmars.

Two-stage and query-based instance segmentation methods have achieved remarkable results. However, their segmented masks are still very coarse. In this paper, we present Mask Transfiner for high-quality and efficient instance segmentation. Instead of operating on regular dense tensors, our Mask Transfiner decomposes and represents the image regions as a quadtree. Our transformer-based approach only processes detected error-prone tree nodes and self-corrects their errors in parallel. While these sparse pixels only constitute a small proportion of the total number, they are critical to the final mask quality. This allows Mask Transfiner to predict highly accurate instance masks, at a low computational cost. Extensive experiments demonstrate that Mask Transfiner outperforms current instance segmentation methods on three popular benchmarks, significantly improving both two-stage and query-based frameworks by a large margin of +3.0 mask AP on COCO and BDD100K, and +6.6 boundary AP on Cityscapes. Our code and trained models will be available at http://vis.xyz/pub/transfiner.

In this paper, we address the challenge of making ViT models more robust to unseen affine transformations. Such robustness becomes useful in various recognition tasks such as face recognition when image alignment failures occur. We propose a novel method called KP-RPE, which leverages key points (e.g.~facial landmarks) to make ViT more resilient to scale, translation, and pose variations. We begin with the observation that Relative Position Encoding (RPE) is a good way to bring affine transform generalization to ViTs. RPE, however, can only inject the model with prior knowledge that nearby pixels are more important than far pixels. Keypoint RPE (KP-RPE) is an extension of this principle, where the significance of pixels is not solely dictated by their proximity but also by their relative positions to specific keypoints within the image. By anchoring the significance of pixels around keypoints, the model can more effectively retain spatial relationships, even when those relationships are disrupted by affine transformations. We show the merit of KP-RPE in face and gait recognition. The experimental results demonstrate the effectiveness in improving face recognition performance from low-quality images, particularly where alignment is prone to failure. Code and pre-trained models are available.

Attributed bipartite graphs (ABGs) are an expressive data model for describing the interactions between two sets of heterogeneous nodes that are associated with rich attributes, such as customer-product purchase networks and author-paper authorship graphs. Partitioning the target node set in such graphs into k disjoint clusters (referred to as k-ABGC) finds widespread use in various domains, including social network analysis, recommendation systems, information retrieval, and bioinformatics. However, the majority of existing solutions towards k-ABGC either overlook attribute information or fail to capture bipartite graph structures accurately, engendering severely compromised result quality. The severity of these issues is accentuated in real ABGs, which often encompass millions of nodes and a sheer volume of attribute data, rendering effective k-ABGC over such graphs highly challenging. In this paper, we propose TPO, an effective and efficient approach to k-ABGC that achieves superb clustering performance on multiple real datasets. TPO obtains high clustering quality through two major contributions: (i) a novel formulation and transformation of the k-ABGC problem based on multi-scale attribute affinity specialized for capturing attribute affinities between nodes with the consideration of their multi-hop connections in ABGs, and (ii) a highly efficient solver that includes a suite of carefully-crafted optimizations for sidestepping explicit affinity matrix construction and facilitating faster convergence. Extensive experiments, comparing TPO against 19 baselines over 5 real ABGs, showcase the superior clustering quality of TPO measured against ground-truth labels. Moreover, compared to the state of the arts, TPO is often more than 40x faster over both small and large ABGs.

Feedforward 3D reconstruction has largely followed an {appearance-driven paradigm}: multi-view images are encoded into visual representations, cross-view correspondence is implicitly inferred from learned features, and 3D primitives are subsequently predicted from these representations. However, calibrated cameras and sparse metric measurements already provide explicit constraints on where the same physical point should appear across views. We propose a novel paradigm, Geometry-Conditioned Feedforward Reconstruction, in which metric geometry establishes cross-view correspondence before the 3D representation is formed, while learned visual features refine rather than discover this correspondence. Based on this paradigm, we introduce GeoForward. Sparse LiDAR points are unprojected into 3D and analytically projected across calibrated cameras to provide metric correspondence anchors. A bounded continuous local search then refines these anchors using visual features, and the resulting geometry-conditioned representation is fused with global multi-view context from VGGT. The shared representation drives separate metric-depth and Gaussian-attribute prediction, establishing a direct path from explicit geometry to both Gaussian centers and spatial attributes. A sparse 3D refinement module subsequently improves local attribute compatibility while preserving the geometrically determined centers. For temporal reconstruction, endpoint Gaussians are composed using vehicle masks and motion priors. On nuScenes, GeoForward achieves the lowest cross-camera depth-consistency error and Chamfer distance among the compared methods while maintaining competitive reconstruction quality. These results demonstrate that explicitly conditioning correspondence formation on metric geometry provides an effective alternative to purely appearance-driven feedforward 3D reconstruction.

African agriculture is undergoing rapid transformation. Annual maps of crop fields are key to understanding the nature of this transformation, but such maps are currently lacking and must be developed using advanced machine learning models trained on high resolution remote sensing imagery. To enable the development of such models, we delineated field boundaries in 33,746 Planet images captured between 2017 and 2023 across the continent using a custom labeling platform with built-in procedures for assessing and mitigating label error. We collected 42,403 labels, including 7,204 labels arising from tasks dedicated to assessing label quality (Class 1 labels), 32,167 from sites mapped once by a single labeller (Class 2) and 3,032 labels from sites where 3 or more labellers were tasked to map the same location (Class 4). Class 1 labels were used to calculate labeller-specific quality scores, while Class 1 and 4 sites mapped by at least 3 labellers were used to further evaluate label uncertainty using a Bayesian risk metric. Quality metrics showed that label quality was moderately high (0.75) for measures of total field extent, but low regarding the number of individual fields delineated (0.33), and the position of field edges (0.05). These values are expected when delineating small-scale fields in 3-5 m resolution imagery, which can be too coarse to reliably distinguish smaller fields, particularly in dense croplands, and therefore requires substantial labeller judgement. Nevertheless, previous work shows that such labels can train effective field mapping models. Furthermore, this large, probabilistic sample on its own provides valuable insight into regional agricultural characteristics, highlighting variations in the median field size and density. The imagery and vectorized labels along with quality information is available for download from two public repositories.

Topological data analysis (TDA) is an area of data science that focuses on using invariants from algebraic topology to provide multiscale shape descriptors for geometric data sets such as point clouds. One of the most important such descriptors is {\em persistent homology}, which encodes the change in shape as a filtration parameter changes; a typical parameter is the feature scale. For many data sets, it is useful to simultaneously vary multiple filtration parameters, for example feature scale and density. While the theoretical properties of single parameter persistent homology are well understood, less is known about the multiparameter case. In particular, a central question is the problem of representing multiparameter persistent homology by elements of a vector space for integration with standard machine learning algorithms. Existing approaches to this problem either ignore most of the multiparameter information to reduce to the one-parameter case or are heuristic and potentially unstable in the face of noise. In this article, we introduce a new general representation framework that leverages recent results on {\em decompositions} of multiparameter persistent homology. This framework is rich in information, fast to compute, and encompasses previous approaches. Moreover, we establish theoretical stability guarantees under this framework as well as efficient algorithms for practical computation, making this framework an applicable and versatile tool for analyzing geometric and point cloud data. We validate our stability results and algorithms with numerical experiments that demonstrate statistical convergence, prediction accuracy, and fast running times on several real data sets.

While Text-to-Image (T2I) diffusion models excel at generating visually appealing images of individual instances, they struggle to accurately position and control the features generation of multiple instances. The Layout-to-Image (L2I) task was introduced to address the positioning challenges by incorporating bounding boxes as spatial control signals, but it still falls short in generating precise instance features. In response, we propose the Instance Feature Generation (IFG) task, which aims to ensure both positional accuracy and feature fidelity in generated instances. To address the IFG task, we introduce the Instance Feature Adapter (IFAdapter). The IFAdapter enhances feature depiction by incorporating additional appearance tokens and utilizing an Instance Semantic Map to align instance-level features with spatial locations. The IFAdapter guides the diffusion process as a plug-and-play module, making it adaptable to various community models. For evaluation, we contribute an IFG benchmark and develop a verification pipeline to objectively compare models' abilities to generate instances with accurate positioning and features. Experimental results demonstrate that IFAdapter outperforms other models in both quantitative and qualitative evaluations.

We present vMAP, an object-level dense SLAM system using neural field representations. Each object is represented by a small MLP, enabling efficient, watertight object modelling without the need for 3D priors. As an RGB-D camera browses a scene with no prior information, vMAP detects object instances on-the-fly, and dynamically adds them to its map. Specifically, thanks to the power of vectorised training, vMAP can optimise as many as 50 individual objects in a single scene, with an extremely efficient training speed of 5Hz map update. We experimentally demonstrate significantly improved scene-level and object-level reconstruction quality compared to prior neural field SLAM systems. Project page: https://kxhit.github.io/vMAP.

Recent advancements in large language models (LLMs) integrated with external tools and APIs have successfully addressed complex tasks by using in-context learning or fine-tuning. Despite this progress, the vast scale of tool retrieval remains challenging due to stringent input length constraints. In response, we propose a pre-retrieval strategy from an extensive repository, effectively framing the problem as the massive tool retrieval (MTR) task. We introduce the MTRB (massive tool retrieval benchmark) to evaluate real-world tool-augmented LLM scenarios with a large number of tools. This benchmark is designed for low-resource scenarios and includes a diverse collection of tools with descriptions refined for consistency and clarity. It consists of three subsets, each containing 90 test samples and 10 training samples. To handle the low-resource MTR task, we raise a new query-tool alignment (QTA) framework leverages LLMs to enhance query-tool alignment by rewriting user queries through ranking functions and the direct preference optimization (DPO) method. This approach consistently outperforms existing state-of-the-art models in top-5 and top-10 retrieval tasks across the MTRB benchmark, with improvements up to 93.28% based on the metric Sufficiency@k, which measures the adequacy of tool retrieval within the first k results. Furthermore, ablation studies validate the efficacy of our framework, highlighting its capacity to optimize performance even with limited annotated samples. Specifically, our framework achieves up to 78.53% performance improvement in Sufficiency@k with just a single annotated sample. Additionally, QTA exhibits strong cross-dataset generalizability, emphasizing its potential for real-world applications.

Outer-learning algorithms use infinitesimal sensitivities to propose finite changes to initialization or training parameters. For hard-ReLU training, the derivative of the finite program and the derivative of its flow limit do not by themselves specify the response at a chosen radius. We characterize the intervening regime in which the perturbation radius is proportional to the GD step. Integer event rounding then survives at leading order: smooth Euler bias shifts each discrete phase, and upstream rounding moves downstream branch boundaries. We derive the crossing indices and a uniform endpoint expansion for finitely many separated transverse events in piecewise-C^2 dynamics, away from recursive phase boundaries. In contractive affine regions, an explicit remainder and complete branch verification certify finite candidate comparisons. Scalar phase frequencies and a coupled feedback ablation test the mechanism; frozen nonlinear-network experiments show radius-dependent prediction accuracy, including incomplete branch matches and failed-word tails. Together with local AD and uniform flow consistency, the result identifies sufficient response regimes: differentiating training is a choice of perturbation resolution as well as a choice of derivative.

Historical maps contain detailed geographic information difficult to find elsewhere covering long-periods of time (e.g., 125 years for the historical topographic maps in the US). However, these maps typically exist as scanned images without searchable metadata. Existing approaches making historical maps searchable rely on tedious manual work (including crowd-sourcing) to generate the metadata (e.g., geolocations and keywords). Optical character recognition (OCR) software could alleviate the required manual work, but the recognition results are individual words instead of location phrases (e.g., "Black" and "Mountain" vs. "Black Mountain"). This paper presents an end-to-end approach to address the real-world problem of finding and indexing historical map images. This approach automatically processes historical map images to extract their text content and generates a set of metadata that is linked to large external geospatial knowledge bases. The linked metadata in the RDF (Resource Description Framework) format support complex queries for finding and indexing historical maps, such as retrieving all historical maps covering mountain peaks higher than 1,000 meters in California. We have implemented the approach in a system called mapKurator. We have evaluated mapKurator using historical maps from several sources with various map styles, scales, and coverage. Our results show significant improvement over the state-of-the-art methods. The code has been made publicly available as modules of the Kartta Labs project at https://github.com/kartta-labs/Project.

This paper introduces PatchRefiner, an advanced framework for metric single image depth estimation aimed at high-resolution real-domain inputs. While depth estimation is crucial for applications such as autonomous driving, 3D generative modeling, and 3D reconstruction, achieving accurate high-resolution depth in real-world scenarios is challenging due to the constraints of existing architectures and the scarcity of detailed real-world depth data. PatchRefiner adopts a tile-based methodology, reconceptualizing high-resolution depth estimation as a refinement process, which results in notable performance enhancements. Utilizing a pseudo-labeling strategy that leverages synthetic data, PatchRefiner incorporates a Detail and Scale Disentangling (DSD) loss to enhance detail capture while maintaining scale accuracy, thus facilitating the effective transfer of knowledge from synthetic to real-world data. Our extensive evaluations demonstrate PatchRefiner's superior performance, significantly outperforming existing benchmarks on the Unreal4KStereo dataset by 18.1% in terms of the root mean squared error (RMSE) and showing marked improvements in detail accuracy and consistent scale estimation on diverse real-world datasets like CityScape, ScanNet++, and ETH3D.

We tackle the problem of generating a complete vector map representation from aerial imagery in a single run: producing polygons for all land-cover classes with shared boundaries and without gaps or overlaps. Existing polygonization methods are typically class-specific; extending them to multiple classes via per-class runs commonly leads to topological inconsistencies, such as duplicated edges, gaps, and overlaps. We formalize this new task as All-Class Polygonal Vectorization (ACPV) and release the first public benchmark, Deventer-512, with standardized metrics jointly evaluating semantic fidelity, geometric accuracy, vertex efficiency, per-class topological fidelity and global topological consistency. To realize ACPV, we propose ACPV-Net, a unified framework introducing a novel Semantically Supervised Conditioning (SSC) mechanism coupling semantic perception with geometric primitive generation, along with a topological reconstruction that enforces shared-edge consistency by design. While enforcing such strict topological constraints, ACPV-Net surpasses all class-specific baselines in polygon quality across classes on Deventer-512. It also applies to single-class polygonal vectorization without any architectural modification, achieving the best-reported results on WHU-Building. Data, code, and models will be released at: https://github.com/HeinzJiao/ACPV-Net.

Maps are fundamental medium to visualize and represent the real word in a simple and 16 philosophical way. The emergence of the 3rd wave information has made a proportion of maps are available to be generated ubiquitously, which would significantly enrich the dimensions and perspectives to understand the characteristics of the real world. However, a majority of map dataset have never been discovered, acquired and effectively used, and the map data used in many applications might not be completely fitted for the authentic demands of these applications. This challenge is emerged due to the lack of numerous well-labelled benchmark datasets for implementing the deep learning approaches into identifying complicated map content. Thus, we develop a large-scale benchmark dataset that includes well-labelled dataset for map text annotation recognition, map scene classification, map super-resolution reconstruction, and map style transferring. Furthermore, these well-labelled datasets would facilitate the state-of-the-art machine intelligence technologies to conduct map feature detection, map pattern recognition and map content retrieval. We hope our efforts would be useful for AI-enhanced cartographical applications.

Self-supervised pretraining has transformed computer vision by enabling data-efficient fine-tuning, yet high-resolution pretraining typically requires server-scale infrastructure, limiting custom in-domain training for many research laboratories. Masked Autoencoders (MAE) reduce computation by encoding only visible tokens, but combining MAE with hierarchical downsampling architectures has remained structurally challenging due to dense grid priors and mask-aware design compromises. We introduce AFFMAE, a masking-friendly hierarchical pretraining framework built on adaptive, off-grid token merging. AFFMAE removes dense-grid assumptions while preserving hierarchical scalability during pre-training and fine-tuning. To support this architecture, we developed numerically stable mixed-precision Triton kernels and a lightweight, point-based decoder that can be directly repurposed as a segmentation head. On high-resolution microscopy segmentation, AFFMAE matches MAE finetuning performance on foot process width estimation with ViT backbone at equal parameter counts while being 2x faster during pre-training and halving peak memory usage. Furthermore, AFFMAE achieves up to 5x throughput speedups fine-tuning at the 1024px resolution, providing high-resolution model training on desktop hardware. Code available at https://github.com/najafian-lab/affmae.

Instance-level roof-to-footprint offset (RFO) prediction is central to extracting building footprints from off-nadir imagery. Query-based pipelines commonly use high-dimensional instance tokens to predict signed two-dimensional RFOs. We investigate whether RFO prediction can instead use a compact offset token. Under local pinhole projection and vertical-extrusion assumptions, the idealized RFO map admits a five-parameter sufficient descriptor comprising intrinsic shape, composite amplitude, and relative geometry. This factorization provides a structural prior for a five-dimensional offset token, whose channels learn task-relevant latent representations through end-to-end training. Based on this design, we propose LoDEOT, which retains high-dimensional instance tokens for detection and segmentation but maps instance-token, concentration-gated roof, and box-mask evidence to a five-dimensional offset token followed by an independent two-dimensional readout. Known denoising-query target indices further align each supervised decoder-layer estimate with the same clean instance RFO, organizing successive predictions as target-aligned recovery under perturbed query conditions. Experiments on five real-world building datasets demonstrate the effectiveness of LoDEOT for building footprint extraction. Experiments on real-world building datasets demonstrate that a five-dimensional offset token can support accurate RFO prediction. On BONAI, LoDEOT achieves the best roof-detection bAP and bAP50 and leads all five offset-corrected footprint metrics among the evaluated end-to-end methods, with FAP50 of 54.58 and mEPE of 5.23 pixels. Its FAP50 exceeds those of the evaluated end-to-end baselines by 7.56-16.85 percentage points.

Large datasets have become commonplace in NLP research. However, the increased emphasis on data quantity has made it challenging to assess the quality of data. We introduce Data Maps---a model-based tool to characterize and diagnose datasets. We leverage a largely ignored source of information: the behavior of the model on individual instances during training (training dynamics) for building data maps. This yields two intuitive measures for each example---the model's confidence in the true class, and the variability of this confidence across epochs---obtained in a single run of training. Experiments across four datasets show that these model-dependent measures reveal three distinct regions in the data map, each with pronounced characteristics. First, our data maps show the presence of "ambiguous" regions with respect to the model, which contribute the most towards out-of-distribution generalization. Second, the most populous regions in the data are "easy to learn" for the model, and play an important role in model optimization. Finally, data maps uncover a region with instances that the model finds "hard to learn"; these often correspond to labeling errors. Our results indicate that a shift in focus from quantity to quality of data could lead to robust models and improved out-of-distribution generalization.

Accurate fish detection in underwater imagery is essential for ecological monitoring, aquaculture automation, and robotic perception. However, practical deployment remains limited by fragmented datasets, heterogeneous imaging conditions, and inconsistent evaluation protocols. To address these gaps, we present FishDet-M, the largest unified benchmark for fish detection, comprising 13 publicly available datasets spanning diverse aquatic environments including marine, brackish, occluded, and aquarium scenes. All data are harmonized using COCO-style annotations with both bounding boxes and segmentation masks, enabling consistent and scalable cross-domain evaluation. We systematically benchmark 28 contemporary object detection models, covering the YOLOv8 to YOLOv12 series, R-CNN based detectors, and DETR based models. Evaluations are conducted using standard metrics including mAP, mAP@50, and mAP@75, along with scale-specific analyses (AP_S, AP_M, AP_L) and inference profiling in terms of latency and parameter count. The results highlight the varying detection performance across models trained on FishDet-M, as well as the trade-off between accuracy and efficiency across models of different architectures. To support adaptive deployment, we introduce a CLIP-based model selection framework that leverages vision-language alignment to dynamically identify the most semantically appropriate detector for each input image. This zero-shot selection strategy achieves high performance without requiring ensemble computation, offering a scalable solution for real-time applications. FishDet-M establishes a standardized and reproducible platform for evaluating object detection in complex aquatic scenes. All datasets, pretrained models, and evaluation tools are publicly available to facilitate future research in underwater computer vision and intelligent marine systems.

Low-rank SVD-based compression offers a powerful strategy to reduce the computational costs of LLMs. However, existing methods face two key limitations: (i) global rank allocation, where uncalibrated error proxies fail to capture complex error propagation, and (ii) decomposition quality, where Fisher-based estimators suffer from severe rank collapse. In this work, we address these limitations by introducing Layer-wise Error Modeling Search (LEMS) and KFAC-SVD. LEMS advances rank allocation by introducing a layer-wise error surrogate that integrates local and global layer importance alongside a propagation bias, enabling effective global rank allocation via an ILP formulation. KFAC-SVD improves decomposition quality by utilizing token-wise statistics, mitigating the rank deficiency observed in prior Fisher-based SVD approaches. Across Mistral, Qwen3, and Llama 3 model families, we show that LEMS consistently outperforms existing search strategies, delivering significant zero-shot accuracy gains of up to 4.8 p.p. that generalize to model sizes of 70B parameters, while KFAC-SVD achieves an average perplexity improvement of 15%. Project page and code: https://lems-svd.github.io

Automated feature detection in historical maps can significantly accelerate the reconstruction of the geospatial past. However, this process is often constrained by the time-consuming task of manually digitizing sufficient high-quality training data. The emergence of visual foundation models, such as the Segment Anything Model (SAM), offers a promising solution due to their remarkable generalization capabilities and rapid adaptation to new data distributions. Despite this, directly applying SAM in a zero-shot manner to historical map segmentation poses significant challenges, including poor recognition of certain geospatial features and a reliance on input prompts, which limits its ability to be fully automated. To address these challenges, we introduce MapSAM, a parameter-efficient fine-tuning strategy that adapts SAM into a prompt-free and versatile solution for various downstream historical map segmentation tasks. Specifically, we employ Weight-Decomposed Low-Rank Adaptation (DoRA) to integrate domain-specific knowledge into the image encoder. Additionally, we develop an automatic prompt generation process, eliminating the need for manual input. We further enhance the positional prompt in SAM, transforming it into a higher-level positional-semantic prompt, and modify the cross-attention mechanism in the mask decoder with masked attention for more effective feature aggregation. The proposed MapSAM framework demonstrates promising performance across two distinct historical map segmentation tasks: one focused on linear features and the other on areal features. Experimental results show that it adapts well to various features, even when fine-tuned with extremely limited data (e.g. 10 shots).

Online mapping and end-to-end (E2E) planning in autonomous driving remain largely sensor-centric, leaving rich map priors, including HD/SD vector maps, rasterized SD maps, and satellite imagery, underused because of heterogeneity, pose drift, and inconsistent availability at test time. We present UMPE, a Unified Map Prior Encoder that can ingest any subset of four priors and fuse them with BEV features for both mapping and planning. UMPE has two branches. The vector encoder pre-aligns HD/SD polylines with a frame-wise SE(2) correction, encodes points via multi-frequency sinusoidal features, and produces polyline tokens with confidence scores. BEV queries then apply cross-attention with confidence bias, followed by normalized channel-wise gating to avoid length imbalance and softly down-weight uncertain sources. The raster encoder shares a ResNet-18 backbone conditioned by FiLM with scaling and shift at every stage, performs SE(2) micro-alignment, and injects priors through zero-initialized residual fusion, so the network starts from a do-no-harm baseline and learns to add only useful prior evidence. A vector-then-raster fusion order reflects the inductive bias of geometry first, appearance second. On nuScenes mapping, UMPE lifts MapTRv2 from 61.5 to 67.4 mAP (+5.9) and MapQR from 66.4 to 71.7 mAP (+5.3). On Argoverse2, UMPE adds +4.1 mAP over strong baselines. UMPE is compositional: when trained with all priors, it outperforms single-prior models even when only one prior is available at test time, demonstrating powerset robustness. For E2E planning with the VAD backbone on nuScenes, UMPE reduces trajectory error from 0.72 to 0.42 m L2 on average (-0.30 m) and collision rate from 0.22% to 0.12% (-0.10%), surpassing recent prior-injection methods. These results show that a unified, alignment-aware treatment of heterogeneous map priors yields better mapping and better planning.

High-Definition Maps (HD maps) are essential for the precise navigation and decision-making of autonomous vehicles, yet their creation and upkeep present significant cost and timeliness challenges. The online construction of HD maps using on-board sensors has emerged as a promising solution; however, these methods can be impeded by incomplete data due to occlusions and inclement weather. This paper proposes the PriorDrive framework to addresses these limitations by harnessing the power of prior maps, significantly enhancing the robustness and accuracy of online HD map construction. Our approach integrates a variety of prior maps, such as OpenStreetMap's Standard Definition Maps (SD maps), outdated HD maps from vendors, and locally constructed maps from historical vehicle data. To effectively encode this prior information into online mapping models, we introduce a Hybrid Prior Representation (HPQuery) that standardizes the representation of diverse map elements. At the core of PriorDrive is the Unified Vector Encoder (UVE), which employs hybrid prior embedding and a dual encoding mechanism to process vector data. Furthermore, we propose a segment-level and point-level pre-training strategy that enables the UVE to learn the prior distribution of vector data, thereby improving the encoder's generalizability and performance. Through extensive testing on the nuScenes, Argoverse 2 and OpenLane-V2, we demonstrate that PriorDrive is highly compatible with various online mapping models and substantially improves map prediction capabilities. The integration of prior maps through the PriorDrive framework offers a robust solution to the challenges of single-perception data, paving the way for more reliable autonomous vehicle navigation.

3D scene reconstruction is a long-standing vision task. Existing approaches can be categorized into geometry-based and learning-based methods. The former leverages multi-view geometry but can face catastrophic failures due to the reliance on accurate pixel correspondence across views. The latter was proffered to mitigate these issues by learning 2D or 3D representation directly. However, without a large-scale video or 3D training data, it can hardly generalize to diverse real-world scenarios due to the presence of tens of millions or even billions of optimization parameters in the deep network. Recently, robust monocular depth estimation models trained with large-scale datasets have been proven to possess weak 3D geometry prior, but they are insufficient for reconstruction due to the unknown camera parameters, the affine-invariant property, and inter-frame inconsistency. Here, we propose a novel test-time optimization approach that can transfer the robustness of affine-invariant depth models such as LeReS to challenging diverse scenes while ensuring inter-frame consistency, with only dozens of parameters to optimize per video frame. Specifically, our approach involves freezing the pre-trained affine-invariant depth model's depth predictions, rectifying them by optimizing the unknown scale-shift values with a geometric consistency alignment module, and employing the resulting scale-consistent depth maps to robustly obtain camera poses and achieve dense scene reconstruction, even in low-texture regions. Experiments show that our method achieves state-of-the-art cross-dataset reconstruction on five zero-shot testing datasets.

Remote sensing image segmentation is crucial for environmental monitoring, disaster assessment, and resource management, but its performance largely depends on the quality of the dataset. Although several high-quality datasets are broadly accessible, data scarcity remains for specialized tasks like marine oil spill segmentation. Such tasks still rely on manual annotation, which is both time-consuming and influenced by subjective human factors. The segment anything model 2 (SAM2) has strong potential as an automatic annotation framework but struggles to perform effectively on heterogeneous, low-contrast remote sensing imagery. To address these challenges, we introduce a novel label enhancement and automatic annotation framework, termed SAM2-ELNet (Enhancement and Labeling Network). Specifically, we employ the frozen Hiera backbone from the pretrained SAM2 as the encoder, while fine-tuning the adapter and decoder for different remote sensing tasks. In addition, the proposed framework includes a label quality evaluator for filtering, ensuring the reliability of the generated labels. We design a series of experiments targeting resource-limited remote sensing tasks and evaluate our method on two datasets: the Deep-SAR Oil Spill (SOS) dataset with Synthetic Aperture Radar (SAR) imagery, and the CHN6-CUG Road dataset with Very High Resolution (VHR) optical imagery. The proposed framework can enhance coarse annotations and generate reliable training data under resource-limited conditions. Fine-tuned on only 30% of the training data, it generates automatically labeled data. A model trained solely on these achieves slightly lower performance than using the full original annotations, while greatly reducing labeling costs and offering a practical solution for large-scale remote sensing interpretation.

We develop the GKM theory for the torus-equivariant cohomology of the affine flag variety using the combinatorics of alcove walks. Dual to the usual GKM setup, which depicts the orbits of the small torus action on a graph, alcove walks take place in tessellations of Euclidean space. Walks in affine rank two occur on triangulations of the plane, providing a more direct connection to splines used for approximating surfaces. Alcove walks in GKM theory also need not be minimal length, and can instead be randomly generated, giving rise to more flexible implementation. This work reinterprets and recovers classical results in GKM theory on the affine flag variety, generalizing them to both non-minimal and folded alcove walks, all motivated by applications to splines.

Existing oriented object detection methods commonly use metric AP_{50} to measure the performance of the model. We argue that AP_{50} is inherently unsuitable for oriented object detection due to its large tolerance in angle deviation. Therefore, we advocate using high-precision metric, e.g. AP_{75}, to measure the performance of models. In this paper, we propose an Aspect Ratio Sensitive Oriented Object Detector with Transformer, termed ARS-DETR, which exhibits a competitive performance in high-precision oriented object detection. Specifically, a new angle classification method, calling Aspect Ratio aware Circle Smooth Label (AR-CSL), is proposed to smooth the angle label in a more reasonable way and discard the hyperparameter that introduced by previous work (e.g. CSL). Then, a rotated deformable attention module is designed to rotate the sampling points with the corresponding angles and eliminate the misalignment between region features and sampling points. Moreover, a dynamic weight coefficient according to the aspect ratio is adopted to calculate the angle loss. Comprehensive experiments on several challenging datasets show that our method achieves competitive performance on the high-precision oriented object detection task.

We introduce a new task, Map and Locate, which unifies the traditionally distinct objectives of open-vocabulary segmentation - detecting and segmenting object instances based on natural language queries - and 3D reconstruction, the process of estimating a scene's 3D structure from visual inputs. Specifically, Map and Locate involves generating a point cloud from an unposed video and segmenting object instances based on open-vocabulary queries. This task serves as a critical step toward real-world embodied AI applications and introduces a practical task that bridges reconstruction, recognition and reorganization. To tackle this task, we introduce a simple yet effective baseline, which we denote as SAB3R. Our approach builds upon MASt3R, a recent breakthrough in 3D computer vision, and incorporates a lightweight distillation strategy. This method transfers dense, per-pixel semantic features from 2D vision backbones (eg, CLIP and DINOv2) to enhance MASt3R's capabilities. Without introducing any auxiliary frozen networks, our model generates per-pixel semantic features and constructs cohesive point maps in a single forward pass. Compared to separately deploying MASt3R and CLIP, our unified model, SAB3R, achieves superior performance on the Map and Locate benchmark. Furthermore, we evaluate SAB3R on both 2D semantic segmentation and 3D tasks to comprehensively validate its effectiveness.

Recent advancements in foundation models have enhanced AI systems' capabilities in autonomous tool usage and reasoning. However, their ability in location or map-based reasoning - which improves daily life by optimizing navigation, facilitating resource discovery, and streamlining logistics - has not been systematically studied. To bridge this gap, we introduce MapEval, a benchmark designed to assess diverse and complex map-based user queries with geo-spatial reasoning. MapEval features three task types (textual, API-based, and visual) that require collecting world information via map tools, processing heterogeneous geo-spatial contexts (e.g., named entities, travel distances, user reviews or ratings, images), and compositional reasoning, which all state-of-the-art foundation models find challenging. Comprising 700 unique multiple-choice questions about locations across 180 cities and 54 countries, MapEval evaluates foundation models' ability to handle spatial relationships, map infographics, travel planning, and navigation challenges. Using MapEval, we conducted a comprehensive evaluation of 28 prominent foundation models. While no single model excelled across all tasks, Claude-3.5-Sonnet, GPT-4o, and Gemini-1.5-Pro achieved competitive performance overall. However, substantial performance gaps emerged, particularly in MapEval, where agents with Claude-3.5-Sonnet outperformed GPT-4o and Gemini-1.5-Pro by 16% and 21%, respectively, and the gaps became even more amplified when compared to open-source LLMs. Our detailed analyses provide insights into the strengths and weaknesses of current models, though all models still fall short of human performance by more than 20% on average, struggling with complex map images and rigorous geo-spatial reasoning. This gap highlights MapEval's critical role in advancing general-purpose foundation models with stronger geo-spatial understanding.

Currently, high-definition (HD) map construction leans towards a lightweight online generation tendency, which aims to preserve timely and reliable road scene information. However, map elements contain strong shape priors. Subtle and sparse annotations make current detection-based frameworks ambiguous in locating relevant feature scopes and cause the loss of detailed structures in prediction. To alleviate these problems, we propose MGMap, a mask-guided approach that effectively highlights the informative regions and achieves precise map element localization by introducing the learned masks. Specifically, MGMap employs learned masks based on the enhanced multi-scale BEV features from two perspectives. At the instance level, we propose the Mask-activated instance (MAI) decoder, which incorporates global instance and structural information into instance queries by the activation of instance masks. At the point level, a novel position-guided mask patch refinement (PG-MPR) module is designed to refine point locations from a finer-grained perspective, enabling the extraction of point-specific patch information. Compared to the baselines, our proposed MGMap achieves a notable improvement of around 10 mAP for different input modalities. Extensive experiments also demonstrate that our approach showcases strong robustness and generalization capabilities. Our code can be found at https://github.com/xiaolul2/MGMap.

High-definition (HD) maps are evolving from pre-annotated to real-time construction to better support autonomous driving in diverse scenarios. However, this process is hindered by low-quality input data caused by onboard sensors limited capability and frequent occlusions, leading to incomplete, noisy, or missing data, and thus reduced mapping accuracy and robustness. Recent efforts have introduced satellite images as auxiliary input, offering a stable, wide-area view to complement the limited ego perspective. However, satellite images in Bird's Eye View are often degraded by shadows and occlusions from vegetation and buildings. Prior methods using basic feature extraction and fusion remain ineffective. To address these challenges, we propose SATMapTR, a novel online map construction model that effectively fuses satellite image through two key components: (1) a gated feature refinement module that adaptively filters satellite image features by integrating high-level semantics with low-level structural cues to extract high signal-to-noise ratio map-relevant representations; and (2) a geometry-aware fusion module that consistently fuse satellite and BEV features at a grid-to-grid level, minimizing interference from irrelevant regions and low-quality inputs. Experimental results on the nuScenes dataset show that SATMapTR achieves the highest mean average precision (mAP) of 73.8, outperforming state-of-the-art satellite-enhanced models by up to 14.2 mAP. It also shows lower mAP degradation under adverse weather and sensor failures, and achieves nearly 3 times higher mAP at extended perception ranges.

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

While structure-based relocalizers have long strived for point correspondences when establishing or regressing query-map associations, in this paper, we pioneer the use of planar primitives and 3D planar maps for lightweight 6-DoF camera relocalization in structured environments. Planar primitives, beyond being fundamental entities in projective geometry, also serve as region-based representations that encapsulate both structural and semantic richness. This motivates us to introduce PlanaReLoc, a streamlined plane-centric paradigm where a deep matcher associates planar primitives across the query image and the map within a learned unified embedding space, after which the 6-DoF pose is solved and refined under a robust framework. Through comprehensive experiments on the ScanNet and 12Scenes datasets across hundreds of scenes, our method demonstrates the superiority of planar primitives in facilitating reliable cross-modal structural correspondences and achieving effective camera relocalization without requiring realistically textured/colored maps, pose priors, or per-scene training. The code and data are available at https://github.com/3dv-casia/PlanaReLoc .

Real-valued functions on geometric data -- such as node attributes on a graph -- can be optimized using descriptors from persistent homology, allowing the user to incorporate topological terms in the loss function. When optimizing a single real-valued function (the one-parameter setting), there is a canonical choice of descriptor for persistent homology: the barcode. The operation mapping a real-valued function to its barcode is differentiable almost everywhere, and the convergence of gradient descent for losses using barcodes is relatively well understood. When optimizing a vector-valued function (the multiparameter setting), there is no unique choice of descriptor for multiparameter persistent homology, and many distinct descriptors have been proposed. This calls for the development of a general framework for differentiability and optimization that applies to a wide range of multiparameter homological descriptors. In this article, we develop such a framework and show that it encompasses well-known descriptors of different flavors, such as signed barcodes and the multiparameter persistence landscape. We complement the theory with numerical experiments supporting the idea that optimizing multiparameter homological descriptors can lead to improved performances compared to optimizing one-parameter descriptors, even when using the simplest and most efficiently computable multiparameter descriptors.

Production deployments often swap between different-sized models in a family for cost-quality cascading, mid-conversation switching, and routing, and each swap forces the receiver to repay the prefill from scratch. We propose cross-model KV cache transfer, where the receiver reuses the source's KV cache, skipping prefill. We find that cross-model KV has substantial linear structure across matched-KV pairs, where source and target share KV head count and per-head dimension. On Qwen3 14B->32B, one source layer explains 56% of variance in the target's keys and 32% in values, rising to 79% and 65% with multiple source layers. Building on this, we design a closed-form ridge mapper that operates per head and proceeds in three steps. First, for each target layer we select the top-k most predictive source layers and concatenate their KV as input. Second, we strip RoPE from the keys before mapping, so the fit is position-free and reusable across context lengths. Third, we fit ridge regression on a small calibration set of 500 FineWeb-Edu sequences of 1,024 tokens each. Surprisingly, across six pairs in three families, this linear mapper retains 73-98% of the receiver's standalone-prefill accuracy on four pairs, while two degrade sharply. A nonlinear MLP recovers up to +37 pp HellaSwag retention on the failures. The mapper runs 2.7-25x faster than re-prefill and remains stable across multi-turn handoff, making cross-model KV cache transfer practical.

Image Matching is a core component of all best-performing algorithms and pipelines in 3D vision. Yet despite matching being fundamentally a 3D problem, intrinsically linked to camera pose and scene geometry, it is typically treated as a 2D problem. This makes sense as the goal of matching is to establish correspondences between 2D pixel fields, but also seems like a potentially hazardous choice. In this work, we take a different stance and propose to cast matching as a 3D task with DUSt3R, a recent and powerful 3D reconstruction framework based on Transformers. Based on pointmaps regression, this method displayed impressive robustness in matching views with extreme viewpoint changes, yet with limited accuracy. We aim here to improve the matching capabilities of such an approach while preserving its robustness. We thus propose to augment the DUSt3R network with a new head that outputs dense local features, trained with an additional matching loss. We further address the issue of quadratic complexity of dense matching, which becomes prohibitively slow for downstream applications if not carefully treated. We introduce a fast reciprocal matching scheme that not only accelerates matching by orders of magnitude, but also comes with theoretical guarantees and, lastly, yields improved results. Extensive experiments show that our approach, coined MASt3R, significantly outperforms the state of the art on multiple matching tasks. In particular, it beats the best published methods by 30% (absolute improvement) in VCRE AUC on the extremely challenging Map-free localization dataset.

Large-scale training data with high-quality annotations is critical for training semantic and instance segmentation models. Unfortunately, pixel-wise annotation is labor-intensive and costly, raising the demand for more efficient labeling strategies. In this work, we present a novel 3D-to-2D label transfer method, Panoptic NeRF, which aims for obtaining per-pixel 2D semantic and instance labels from easy-to-obtain coarse 3D bounding primitives. Our method utilizes NeRF as a differentiable tool to unify coarse 3D annotations and 2D semantic cues transferred from existing datasets. We demonstrate that this combination allows for improved geometry guided by semantic information, enabling rendering of accurate semantic maps across multiple views. Furthermore, this fusion process resolves label ambiguity of the coarse 3D annotations and filters noise in the 2D predictions. By inferring in 3D space and rendering to 2D labels, our 2D semantic and instance labels are multi-view consistent by design. Experimental results show that Panoptic NeRF outperforms existing label transfer methods in terms of accuracy and multi-view consistency on challenging urban scenes of the KITTI-360 dataset.

Accurate agricultural field boundary delineation at large scale is a foundational task for food security, supply chain transparency, and carbon accounting. While vision foundation models like SAM show remarkable zero-shot capabilities, they frequently fail in geospatial domains due to topological complexity, cropland texturing patterns, and a lack of physical scale awareness. In this work, we introduce Delineate Anything v2, a globally scalable foundation model designed specifically for wide-area field boundary mapping. We construct FBIS-73M, a 73-million-instance multi-resolution dataset spanning 61 countries. To address the pervasive issue of multi-field administrative parcel merging, we introduce a resolution-specific data curation pipeline that leverages topological image-space adaptation to homogenize merged parcels and strengthen weak physical boundaries. Furthermore, we establish a novel, manually curated evaluation benchmark covering 100 countries to assess independent zero-shot generalization. Our results show that Delineate Anything v2 surpasses the current state-of-the-art, including the Delineate Anything framework, by 0.284 mAP@0.5 (+103.3% relative gain), while maintaining execution speeds suitable for rapid national- and global-scale deployment, as demonstrated by nationwide mapping of Ukraine (603,000 km^2) in 5.4 hours on a consumer-grade workstation. Code, pre-trained weights, the FBIS-73M dataset, and ready-to-use national-scale vector boundary products are publicly available at https://github.com/Lavreniuk/Delineate-Anything.

The k-Nearest Neighbor (kNN) classification approach is conceptually simple - yet widely applied since it often performs well in practical applications. However, using a global constant k does not always provide an optimal solution, e.g., for datasets with an irregular density distribution of data points. This paper proposes an adaptive kNN classifier where k is chosen dynamically for each instance (point) to be classified, such that the expected accuracy of classification is maximized. We define the expected accuracy as the accuracy of a set of structurally similar observations. An arbitrary similarity function can be used to find these observations. We introduce and evaluate different similarity functions. For the evaluation, we use five different classification tasks based on geo-spatial data. Each classification task consists of (tens of) thousands of items. We demonstrate, that the presented expected accuracy measures can be a good estimator for kNN performance, and the proposed adaptive kNN classifier outperforms common kNN and previously introduced adaptive kNN algorithms. Also, we show that the range of considered k can be significantly reduced to speed up the algorithm without negative influence on classification accuracy.

Diffusion and flow-matching schedules control the signal and noise coefficients that mix data and noise along affine probability paths. Minimizing a kinetic action defined on coefficient paths, motivated by optimal transport, helps explain strong baselines but remains model-agnostic and ignores prediction error. Here we introduce a model-aware schedule construction based on fiberwise optimal transport. At a fixed time and state on the probability path, compatible signal/noise decompositions form an affine fiber. We define a fiberwise prediction risk by averaging optimal-transport costs between the true and predictor-induced decompositions within these fibers. On a fixed coefficient curve, combining this risk with coefficient-path kinetic action yields a closed-form optimal time allocation. This construction extends to general linear prediction targets, and the risk profile can be estimated from an early baseline checkpoint. We evaluate DDPMs and flow matching across prediction targets, training configurations, risk-estimation checkpoints, datasets, and architectures. Our model-aware schedules consistently outperform strong baselines, including a 38.6% relative FID reduction for flow matching on CIFAR-10 at 16 function evaluations. Each model-agnostic kinetic baseline determines its own kinetic reference coordinate. In these coordinates, fiberwise-risk profiles from independently trained models in different settings align closely after normalization to unit area. The resulting schedule deformations used in training also align, suggesting empirical universality across the evaluated models and settings. Pretrained-checkpoint diagnostics extend this normalized-risk agreement to larger conditional latent diffusion and 2-RF models. A frozen analytic allocation template retains most of the model-aware improvement without further risk estimation or model-specific fitting.

Training LLMs to invoke tools and leverage retrieved information necessitates high-quality, diverse data. However, existing pipelines for synthetic data generation often rely on tens of thousands of real API calls to enhance generalization, incurring prohibitive costs while lacking multi-hop reasoning and self-reflection. To address these limitations, we introduce ToolForge, an automated synthesis framework that achieves strong real-world tool-calling performance by constructing only a small number of virtual tools, eliminating the need for real API calls. ToolForge leverages a (question, golden context, answer) triple to synthesize large-scale tool-learning data specifically designed for multi-hop search scenarios, further enriching the generated data through multi-hop reasoning and self-reflection mechanisms. To ensure data fidelity, we employ a Multi-Layer Validation Framework that integrates both rule-based and model-based assessments. Empirical results show that a model with only 8B parameters, when trained on our synthesized data, outperforms GPT-4o on multiple benchmarks. Our code and dataset are publicly available at https://github.com/Buycar-arb/ToolForge .

In this paper we introduce a novel family of attributed graphs for the purpose of shape discrimination. Our graphs typically arise from variations on the Mapper graph construction, which is an approximation of the Reeb graph for point cloud data. Our attributions enrich these constructions with (persistent) homology in ways that are provably stable, thereby recording extra topological information that is typically lost in these graph constructions. We provide experiments which illustrate the use of these invariants for shape representation and classification. In particular, we obtain competitive shape classification results when using our topologically attributed graphs as inputs to a simple graph neural network classifier.

Given the damping factor α and precision tolerance ε, andersen2006local introduced Approximate Personalized PageRank (APPR), the de facto local method for approximating the PPR vector, with runtime bounded by Θ(1/(αε)) independent of the graph size. Recently, fountoulakis2022open asked whether faster local algorithms could be developed using O(1/(sqrtαε)) operations. By noticing that APPR is a local variant of Gauss-Seidel, this paper explores the question of whether standard iterative solvers can be effectively localized. We propose to use the locally evolving set process, a novel framework to characterize the algorithm locality, and demonstrate that many standard solvers can be effectively localized. Let operatorname{vol}{ (S_t)} and overlineγ_{t} be the running average of volume and the residual ratio of active nodes textstyle S_{t} during the process. We show operatorname{vol}{ (S_t)}/overlineγ_{t} leq 1/ε and prove APPR admits a new runtime bound O(operatorname{vol}(S_t)/(αoverlineγ_{t})) mirroring the actual performance. Furthermore, when the geometric mean of residual reduction is Θ(sqrtα), then there exists c in (0,2) such that the local Chebyshev method has runtime O(operatorname{vol}(S_{t})/(sqrtα(2-c))) without the monotonicity assumption. Numerical results confirm the efficiency of this novel framework and show up to a hundredfold speedup over corresponding standard solvers on real-world graphs.

The accurate delineation of agricultural field boundaries from satellite imagery is vital for land management and crop monitoring. However, current methods face challenges due to limited dataset sizes, resolution discrepancies, and diverse environmental conditions. We address this by reformulating the task as instance segmentation and introducing the Field Boundary Instance Segmentation - 22M dataset (FBIS-22M), a large-scale, multi-resolution dataset comprising 672,909 high-resolution satellite image patches (ranging from 0.25 m to 10 m) and 22,926,427 instance masks of individual fields, significantly narrowing the gap between agricultural datasets and those in other computer vision domains. We further propose Delineate Anything, an instance segmentation model trained on our new FBIS-22M dataset. Our proposed model sets a new state-of-the-art, achieving a substantial improvement of 88.5% in mAP@0.5 and 103% in mAP@0.5:0.95 over existing methods, while also demonstrating significantly faster inference and strong zero-shot generalization across diverse image resolutions and unseen geographic regions. Code, pre-trained models, and the FBIS-22M dataset are available at https://lavreniuk.github.io/Delineate-Anything.

In this paper, we introduce Mask2Map, a novel end-to-end online HD map construction method designed for autonomous driving applications. Our approach focuses on predicting the class and ordered point set of map instances within a scene, represented in the bird's eye view (BEV). Mask2Map consists of two primary components: the Instance-Level Mask Prediction Network (IMPNet) and the Mask-Driven Map Prediction Network (MMPNet). IMPNet generates Mask-Aware Queries and BEV Segmentation Masks to capture comprehensive semantic information globally. Subsequently, MMPNet enhances these query features using local contextual information through two submodules: the Positional Query Generator (PQG) and the Geometric Feature Extractor (GFE). PQG extracts instance-level positional queries by embedding BEV positional information into Mask-Aware Queries, while GFE utilizes BEV Segmentation Masks to generate point-level geometric features. However, we observed limited performance in Mask2Map due to inter-network inconsistency stemming from different predictions to Ground Truth (GT) matching between IMPNet and MMPNet. To tackle this challenge, we propose the Inter-network Denoising Training method, which guides the model to denoise the output affected by both noisy GT queries and perturbed GT Segmentation Masks. Our evaluation conducted on nuScenes and Argoverse2 benchmarks demonstrates that Mask2Map achieves remarkable performance improvements over previous state-of-the-art methods, with gains of 10.1% mAP and 4.1 mAP, respectively. Our code can be found at https://github.com/SehwanChoi0307/Mask2Map.

Integrating Large Language Models (LLMs) with Knowledge Graphs (KGs) results in complex systems with numerous hyperparameters that directly affect performance. While such systems are increasingly common in retrieval-augmented generation, the role of systematic hyperparameter optimization remains underexplored. In this paper, we study this problem in the context of Cognee, a modular framework for end-to-end KG construction and retrieval. Using three multi-hop QA benchmarks (HotPotQA, TwoWikiMultiHop, and MuSiQue) we optimize parameters related to chunking, graph construction, retrieval, and prompting. Each configuration is scored using established metrics (exact match, F1, and DeepEval's LLM-based correctness metric). Our results demonstrate that meaningful gains can be achieved through targeted tuning. While the gains are consistent, they are not uniform, with performance varying across datasets and metrics. This variability highlights both the value of tuning and the limitations of standard evaluation measures. While demonstrating the immediate potential of hyperparameter tuning, we argue that future progress will depend not only on architectural advances but also on clearer frameworks for optimization and evaluation in complex, modular systems.

Recently, many arbitrary-oriented object detection (AOOD) methods have been proposed and attracted widespread attention in many fields. However, most of them are based on anchor-boxes or standard Gaussian heatmaps. Such label assignment strategy may not only fail to reflect the shape and direction characteristics of arbitrary-oriented objects, but also have high parameter-tuning efforts. In this paper, a novel AOOD method called General Gaussian Heatmap Label Assignment (GGHL) is proposed. Specifically, an anchor-free object-adaptation label assignment (OLA) strategy is presented to define the positive candidates based on two-dimensional (2-D) oriented Gaussian heatmaps, which reflect the shape and direction features of arbitrary-oriented objects. Based on OLA, an oriented-bounding-box (OBB) representation component (ORC) is developed to indicate OBBs and adjust the Gaussian center prior weights to fit the characteristics of different objects adaptively through neural network learning. Moreover, a joint-optimization loss (JOL) with area normalization and dynamic confidence weighting is designed to refine the misalign optimal results of different subtasks. Extensive experiments on public datasets demonstrate that the proposed GGHL improves the AOOD performance with low parameter-tuning and time costs. Furthermore, it is generally applicable to most AOOD methods to improve their performance including lightweight models on embedded platforms.

Detecting arbitrarily oriented tiny objects poses intense challenges to existing detectors, especially for label assignment. Despite the exploration of adaptive label assignment in recent oriented object detectors, the extreme geometry shape and limited feature of oriented tiny objects still induce severe mismatch and imbalance issues. Specifically, the position prior, positive sample feature, and instance are mismatched, and the learning of extreme-shaped objects is biased and unbalanced due to little proper feature supervision. To tackle these issues, we propose a dynamic prior along with the coarse-to-fine assigner, dubbed DCFL. For one thing, we model the prior, label assignment, and object representation all in a dynamic manner to alleviate the mismatch issue. For another, we leverage the coarse prior matching and finer posterior constraint to dynamically assign labels, providing appropriate and relatively balanced supervision for diverse instances. Extensive experiments on six datasets show substantial improvements to the baseline. Notably, we obtain the state-of-the-art performance for one-stage detectors on the DOTA-v1.5, DOTA-v2.0, and DIOR-R datasets under single-scale training and testing. Codes are available at https://github.com/Chasel-Tsui/mmrotate-dcfl.

Learning compatible representations enables the interchangeable use of semantic features as models are updated over time. This is particularly relevant in search and retrieval systems where it is crucial to avoid reprocessing of the gallery images with the updated model. While recent research has shown promising empirical evidence, there is still a lack of comprehensive theoretical understanding about learning compatible representations. In this paper, we demonstrate that the stationary representations learned by the d-Simplex fixed classifier optimally approximate compatibility representation according to the two inequality constraints of its formal definition. This not only establishes a solid foundation for future works in this line of research but also presents implications that can be exploited in practical learning scenarios. An exemplary application is the now-standard practice of downloading and fine-tuning new pre-trained models. Specifically, we show the strengths and critical issues of stationary representations in the case in which a model undergoing sequential fine-tuning is asynchronously replaced by downloading a better-performing model pre-trained elsewhere. Such a representation enables seamless delivery of retrieval service (i.e., no reprocessing of gallery images) and offers improved performance without operational disruptions during model replacement. Code available at: https://github.com/miccunifi/iamcl2r.

Maps are a key component in image-based camera localization and visual SLAM systems: they are used to establish geometric constraints between images, correct drift in relative pose estimation, and relocalize cameras after lost tracking. The exact definitions of maps, however, are often application-specific and hand-crafted for different scenarios (e.g. 3D landmarks, lines, planes, bags of visual words). We propose to represent maps as a deep neural net called MapNet, which enables learning a data-driven map representation. Unlike prior work on learning maps, MapNet exploits cheap and ubiquitous sensory inputs like visual odometry and GPS in addition to images and fuses them together for camera localization. Geometric constraints expressed by these inputs, which have traditionally been used in bundle adjustment or pose-graph optimization, are formulated as loss terms in MapNet training and also used during inference. In addition to directly improving localization accuracy, this allows us to update the MapNet (i.e., maps) in a self-supervised manner using additional unlabeled video sequences from the scene. We also propose a novel parameterization for camera rotation which is better suited for deep-learning based camera pose regression. Experimental results on both the indoor 7-Scenes dataset and the outdoor Oxford RobotCar dataset show significant performance improvement over prior work. The MapNet project webpage is https://goo.gl/mRB3Au.

While global point cloud registration systems have advanced significantly in all aspects, many studies have focused on specific components, such as feature extraction, graph-theoretic pruning, or pose solvers. In this paper, we take a holistic view on the registration problem and develop an open-source and versatile C++ library for point cloud registration, called KISS-Matcher. KISS-Matcher combines a novel feature detector, Faster-PFH, that improves over the classical fast point feature histogram (FPFH). Moreover, it adopts a k-core-based graph-theoretic pruning to reduce the time complexity of rejecting outlier correspondences. Finally, it combines these modules in a complete, user-friendly, and ready-to-use pipeline. As verified by extensive experiments, KISS-Matcher has superior scalability and broad applicability, achieving a substantial speed-up compared to state-of-the-art outlier-robust registration pipelines while preserving accuracy. Our code will be available at https://github.com/MIT-SPARK/KISS-Matcher.

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

We introduce ReMatching, a novel shape correspondence solution based on the functional maps framework. Our method, by exploiting a new and appropriate re-meshing paradigm, can target shape-matching tasks even on meshes counting millions of vertices, where the original functional maps does not apply or requires a massive computational cost. The core of our procedure is a time-efficient remeshing algorithm which constructs a low-resolution geometry while acting conservatively on the original topology and metric. These properties allow translating the functional maps optimization problem on the resulting low-resolution representation, thus enabling efficient computation of correspondences with functional map approaches. Finally, we propose an efficient technique for extending the estimated correspondence to the original meshes. We show that our method is more efficient and effective through quantitative and qualitative comparisons, outperforming state-of-the-art pipelines in quality and computational cost.

In this work, we show that Latent Flow-Matching (LFM) models are robust to different types of perturbations, including data reduction and model capacity shrinkage. We characterize this stability by their tendency to generate similar outputs under identical noise seeds. We provide a perspective relating this phenomenon to flow matching theory, which indicates that this stability is inherent to the FM objective. We further exploit this stability to derive practical algorithms for more efficient training and inference. Concretely, first, we show that by training LFM models on significantly reduced datasets, the performance does not degrade perceptually or quantitatively. This yields multiple advantages, such as reducing training time by converging faster under limited compute budget, and alleviating annotation effort when training conditional models. Second, LFM stability under architectural shrinkage gives rise to a two-model coarse-to-fine approach, one using a light-weight architecture for the first phase of the FM trajectory, and one with higher capacity for the second, thereby reducing the inference cost substantially. To determine which samples are informative, we introduce three sample-scoring criteria and evaluate them under standard metrics for generative models. Our results are thoroughly evaluated on multiple datasets, demonstrating the practical advantage of this stability, including data saving and a more than two-fold inference speedup while generating comparable outputs.

We introduce pi^3, a feed-forward neural network that offers a novel approach to visual geometry reconstruction, breaking the reliance on a conventional fixed reference view. Previous methods often anchor their reconstructions to a designated viewpoint, an inductive bias that can lead to instability and failures if the reference is suboptimal. In contrast, pi^3 employs a fully permutation-equivariant architecture to predict affine-invariant camera poses and scale-invariant local point maps without any reference frames. This design makes our model inherently robust to input ordering and highly scalable. These advantages enable our simple and bias-free approach to achieve state-of-the-art performance on a wide range of tasks, including camera pose estimation, monocular/video depth estimation, and dense point map reconstruction. Code and models are publicly available.

We study the problem of mapping parameter-space variance of a 3D Morphable Model (3DMM) to per-vertex variance. Traditionally, per-vertex variance has been used to visually interpret the learnt parameter uncertainty. However, mapping parameter-space variance to per-vertex using sampling or error propagation is computationally expensive. We address this limitation with Closed-form Local Uncertainty Estimation (CLUE), which transforms the parameter-space distribution of 3DMMs to per-vertex through a closed-form approximation. CLUE emerges from applying the law of total variance to the 3DMM formulation and is modular, computationally inexpensive, and accurate. Subsequently, we study integrating CLUE for in-the-wild human mesh recovery training and inference. We note that CLUE uses the geometry of the mesh as an inductive bias when predicting the variance, leading to improved accuracy. Through extensive qualitative and quantitative experiments, we show that when used in training, CLUE (1) outpeforms probabilistic and deterministic baselines on metrics evaluating joints, mesh and uncertainty, and (2) has the highest uncertainty-to-error spearman correlation, with applications including data mining and interpretable uncertainty. Finally, we share SAM 3D Body (CLUE) which augments the regressor with high resolution uncertainty maps. We make our code available at https://github.com/vita-epfl/CLUE

Traditionally, data selection has been studied in settings where all samples from prospective sources are fully revealed to a machine learning developer. However, in practical data exchange scenarios, data providers often reveal only a limited subset of samples before an acquisition decision is made. Recently, there have been efforts to fit scaling laws that predict model performance at any size and data source composition using the limited available samples. However, these scaling functions are black-box, computationally expensive to fit, highly susceptible to overfitting, or/and difficult to optimize for data selection. This paper proposes a framework called <projektor>, which predicts model performance and supports data selection decisions based on partial samples of prospective data sources. Our approach distinguishes itself from existing work by introducing a novel *two-stage* performance inference process. In the first stage, we leverage the Optimal Transport distance to predict the model's performance for any data mixture ratio within the range of disclosed data sizes. In the second stage, we extrapolate the performance to larger undisclosed data sizes based on a novel parameter-free mapping technique inspired by neural scaling laws. We further derive an efficient gradient-based method to select data sources based on the projected model performance. Evaluation over a diverse range of applications demonstrates that <projektor> significantly improves existing performance scaling approaches in terms of both the accuracy of performance inference and the computation costs associated with constructing the performance predictor. Also, <projektor> outperforms by a wide margin in data selection effectiveness compared to a range of other off-the-shelf solutions.

This technical report documents the development of novel Layout Analysis models integrated into the Docling document-conversion pipeline. We trained several state-of-the-art object detectors based on the RT-DETR, RT-DETRv2 and DFINE architectures on a heterogeneous corpus of 150,000 documents (both openly available and proprietary). Post-processing steps were applied to the raw detections to make them more applicable to the document conversion task. We evaluated the effectiveness of the layout analysis on various document benchmarks using different methodologies while also measuring the runtime performance across different environments (CPU, Nvidia and Apple GPUs). We introduce five new document layout models achieving 20.6% - 23.9% mAP improvement over Docling's previous baseline, with comparable or better runtime. Our best model, "heron-101", attains 78% mAP with 28 ms/image inference time on a single NVIDIA A100 GPU. Extensive quantitative and qualitative experiments establish best practices for training, evaluating, and deploying document-layout detectors, providing actionable guidance for the document conversion community. All trained checkpoints, code, and documentation are released under a permissive license on HuggingFace.

Continuous-time Consistency Models (CMs) promise efficient few-step generation but face significant challenges with training instability. We argue this instability stems from a fundamental conflict: by training a network to learn only a shortcut across a probability flow, the model loses its grasp on the instantaneous velocity field that defines the flow. Our solution is to explicitly anchor the model in the underlying flow during training. We introduce the Flow-Anchored Consistency Model (FACM), a simple but effective training strategy that uses a Flow Matching (FM) task as an anchor for the primary CM shortcut objective. This Flow-Anchoring approach requires no architectural modifications and is broadly compatible with standard model architectures. By distilling a pre-trained LightningDiT model, our method achieves a state-of-the-art FID of 1.32 with two steps (NFE=2) and 1.76 with just one step (NFE=1) on ImageNet 256x256, significantly outperforming previous methods. This provides a general and effective recipe for building high-performance, few-step generative models. Our code and pretrained models: https://github.com/ali-vilab/FACM.

A new class of affine scaling matrices for the interior point Newton-type methods is considered to solve the nonlinear systems with simple bounds. We review the essential properties of a scaling matrix and consider several well-known scaling matrices proposed in the literature. We define a new scaling matrix that is the convex combination of these matrices. The proposed scaling matrix inherits those interesting properties of the individual matrices and satisfies additional desired requirements. The numerical experiments demonstrate the superiority of the new scaling matrix in solving several important test problems.

Model cards describe model behavior through a mixture of textual descriptions and structured artifacts, including performance, configuration, and dataset tables. Existing model search systems rely predominantly on semantic similarity over text, which can produce homogeneous result sets and limit exploration of alternatives. We argue that model search is inherently comparative: users want models that are task-aligned yet differentiated in measurable ways. We hypothesize that this balance requires retrieval over condensed, high-quality evidence rather than verbose descriptions, and much of that evidence is concentrated in structured tables. We present StructuredSemanticSearch, a table-driven model search framework built on the ModelTables benchmark. Given a query, StructuredSemanticSearch combines a semantic baseline for task alignment with a structure-aware pipeline that discovers query-related model-card tables using table discovery operators such as unionability, joinability, and keyword search. Retrieved tables are mapped back to model cards under a controlled top-k budget, enabling fair comparison between text-based and table-based retrieval. Beyond retrieval, StructuredSemanticSearch adapts table integration to the model-table domain through orientation-aware integration, producing compact integrated views of tables from partially overlapping and sometimes transposed evidence tables. For evaluation, we introduce a nugget-based, auditable protocol that extracts compact evidence items from model cards, matches queries to condition- or intent-specific nuggets, and measures evidence coverage and diversity over retrieved model-card candidate sets. This protocol also provides a scalable path toward approximate, evidence-based labeling in dynamic model lakes. Experiments on 597 model-recommendation queries show improved nugget coverage for the structure-aware pipeline than semantic baseline

Treemaps are a popular technique to visualize hierarchical data. The input is a weighted tree tree where the weight of each node is the sum of the weights of its children. A treemap for tree is a hierarchical partition of a rectangle into simply connected regions, usually rectangles. Each region represents a node of tree and its area is proportional to the weight of the corresponding node. An important quality criterion for treemaps is the aspect ratio of its regions. One cannot bound the aspect ratio if the regions are restricted to be rectangles. In contrast, polygonal partitions, that use convex polygons, have bounded aspect ratio. We are the first to obtain convex partitions with optimal aspect ratio O(depth(tree)). However, depth(tree) still depends on the input tree. Hence we introduce a new type of treemaps, namely orthoconvex treemaps, where regions representing leaves are rectangles, L-, and S-shapes, and regions representing internal nodes are orthoconvex polygons. We prove that any input tree, irrespective of the weights of the nodes and the depth of the tree, admits an orthoconvex treemap of constant aspect ratio. We also obtain several specialized results for single-level treemaps, that is, treemaps where the input tree has depth~1.

Semantic mapping based on the supervised object detectors is sensitive to image distribution. In real-world environments, the object detection and segmentation performance can lead to a major drop, preventing the use of semantic mapping in a wider domain. On the other hand, the development of vision-language foundation models demonstrates a strong zero-shot transferability across data distribution. It provides an opportunity to construct generalizable instance-aware semantic maps. Hence, this work explores how to boost instance-aware semantic mapping from object detection generated from foundation models. We propose a probabilistic label fusion method to predict close-set semantic classes from open-set label measurements. An instance refinement module merges the over-segmented instances caused by inconsistent segmentation. We integrate all the modules into a unified semantic mapping system. Reading a sequence of RGB-D input, our work incrementally reconstructs an instance-aware semantic map. We evaluate the zero-shot performance of our method in ScanNet and SceneNN datasets. Our method achieves 40.3 mean average precision (mAP) on the ScanNet semantic instance segmentation task. It outperforms the traditional semantic mapping method significantly.

Advances in embedding models for text, image, audio, and video drive progress across multiple domains, including retrieval-augmented generation, recommendation systems, vehicle/person reidentification, and face recognition. Many applications in these domains require an efficient method to retrieve items that are close to a given query in the embedding space while satisfying a filter condition based on the item's attributes, a problem known as Filtered Approximate Nearest Neighbor Search (FANNS). In this work, we present a comprehensive survey and taxonomy of FANNS methods and analyze how they are benchmarked in the literature. By doing so, we identify a key challenge in the current FANNS landscape: the lack of diverse and realistic datasets, particularly ones derived from the latest transformer-based text embedding models. To address this, we introduce a novel dataset consisting of embedding vectors for the abstracts of over 2.7 million research articles from the arXiv repository, accompanied by 11 real-world attributes such as authors and categories. We benchmark a wide range of FANNS methods on our novel dataset and find that each method has distinct strengths and limitations; no single approach performs best across all scenarios. ACORN, for example, supports various filter types and performs reliably across dataset scales but is often outperformed by more specialized methods. SeRF shows excellent performance for range filtering on ordered attributes but cannot handle categorical attributes. Filtered-DiskANN and UNG excel on the medium-scale dataset but fail on the large-scale dataset, highlighting the challenge posed by transformer-based embeddings, which are often more than an order of magnitude larger than earlier embeddings. We conclude that no universally best method exists.

Reliable autonomous driving systems require high-definition (HD) map that contains detailed map information for planning and navigation. However, pre-build HD map requires a large cost. Visual-based Online Map Generation (OMG) has become an alternative low-cost solution to build a local HD map. Query-based BEV Transformer has been a base model for this task. This model learns HD map predictions from an initial map queries distribution which is obtained by offline optimization on training set. Besides the quality of BEV feature, the performance of this model also highly relies on the capacity of initial map query distribution. However, this distribution is limited because the limited query number. To make map predictions optimal on each test sample, it is essential to generate a suitable initial distribution for each specific scenario. This paper proposes to decompose the whole HD map distribution into a set of point representations, namely map query bank (MQBank). To build specific map query initial distributions of different scenarios, low-cost standard definition map (SD map) data is introduced as a kind of prior knowledge. Moreover, each layer of map decoder network learns instance-level map query features, which will lose detailed information of each point. However, BEV feature map is a point-level dense feature. It is important to keep point-level information in map queries when interacting with BEV feature map. This can also be solved with map query bank method. Final experiments show a new insight on SD map prior and a new record on OpenLaneV2 benchmark with 40.5%, 45.7% mAP on vehicle lane and pedestrian area.

Scalable approaches to learning neural dynamical systems have placed diffusion, flow matching, and few-step generators in flow maps at the forefront of generative modeling. Such state-of-the-art models have limited access to explicit model densities despite evolving from classical generative modeling approaches that leveraged tractable likelihoods, e.g., Normalizing Flows and Autoregressive models. In this paper, we combine these threads of few-step generation and tractable sample likelihoods and introduce Normalizing Flow Maps (NFM), a class of exactly invertible pushforward maps that generalizes normalizing flows and flow maps. More precisely, NFMs learn the integrator of an underlying dynamical system, but crucially, they provide efficient exact likelihood evaluation by construction. To enable scalable training of NFMs, we derive two complementary axes of consistency inherent to NFMs that yield (self) distillation objectives: (1) pointwise matching, which unlocks ell_2-based flow-map style regression losses, and (2) distributional matching, which matches pushforward distributions to the marginals of a prescribed forward process. On conditional image generation on CIFAR-10 and ImageNet-64, NFMs achieve state-of-the-art sample quality among parameter-matched normalizing flows, while supporting likelihood-based RLHF. For equilibrium sampling in Boltzmann Generators, NFMs outperform prior state-of-the-art normalizing flows on both single-system and transferable peptide benchmarks.

Reliable terrain perception is a fundamental requirement for autonomous navigation in unstructured, off-road environments. Desert landscapes present unique challenges due to low chromatic contrast between terrain categories, extreme lighting variability, and sparse vegetation that defy the assumptions of standard road-scene segmentation models. We present DesertFormer, a semantic segmentation pipeline for off-road desert terrain analysis based on SegFormer B2 with a hierarchical Mix Transformer (MiT-B2) backbone. The system classifies terrain into ten ecologically meaningful categories -- Trees, Lush Bushes, Dry Grass, Dry Bushes, Ground Clutter, Flowers, Logs, Rocks, Landscape, and Sky -- enabling safety-aware path planning for ground robots and autonomous vehicles. Trained on a purpose-built dataset of 4,176 annotated off-road images at 512x512 resolution, DesertFormer achieves a mean Intersection-over-Union (mIoU) of 64.4% and pixel accuracy of 86.1%, representing a +24.2% absolute improvement over a DeepLabV3 MobileNetV2 baseline (41.0% mIoU). We further contribute a systematic failure analysis identifying the primary confusion patterns -- Ground Clutter to Landscape and Dry Grass to Landscape -- and propose class-weighted training and copy-paste augmentation for rare terrain categories. Code, checkpoints, and an interactive inference dashboard are released at https://github.com/Yasaswini-ch/Vision-based-Desert-Terrain-Segmentation-using-SegFormer.

Deep functional maps have recently emerged as a powerful tool for solving non-rigid shape correspondence tasks. Methods that use this approach combine the power and flexibility of the functional map framework, with data-driven learning for improved accuracy and generality. However, most existing methods in this area restrict the learning aspect only to the feature functions and still rely on axiomatic modeling for formulating the training loss or for functional map regularization inside the networks. This limits both the accuracy and the applicability of the resulting approaches only to scenarios where assumptions of the axiomatic models hold. In this work, we show, for the first time, that both in-network regularization and functional map training can be replaced with data-driven methods. For this, we first train a generative model of functional maps in the spectral domain using score-based generative modeling, built from a large collection of high-quality maps. We then exploit the resulting model to promote the structural properties of ground truth functional maps on new shape collections. Remarkably, we demonstrate that the learned models are category-agnostic, and can fully replace commonly used strategies such as enforcing Laplacian commutativity or orthogonality of functional maps. Our key technical contribution is a novel distillation strategy from diffusion models in the spectral domain. Experiments demonstrate that our learned regularization leads to better results than axiomatic approaches for zero-shot non-rigid shape matching. Our code is available at: https://github.com/daidedou/diffumatch/

In the deep learning (DL) era, parsing models are extremely simplified with little hurt on performance, thanks to the remarkable capability of multi-layer BiLSTMs in context representation. As the most popular graph-based dependency parser due to its high efficiency and performance, the biaffine parser directly scores single dependencies under the arc-factorization assumption, and adopts a very simple local token-wise cross-entropy training loss. This paper for the first time presents a second-order TreeCRF extension to the biaffine parser. For a long time, the complexity and inefficiency of the inside-outside algorithm hinder the popularity of TreeCRF. To address this issue, we propose an effective way to batchify the inside and Viterbi algorithms for direct large matrix operation on GPUs, and to avoid the complex outside algorithm via efficient back-propagation. Experiments and analysis on 27 datasets from 13 languages clearly show that techniques developed before the DL era, such as structural learning (global TreeCRF loss) and high-order modeling are still useful, and can further boost parsing performance over the state-of-the-art biaffine parser, especially for partially annotated training data. We release our code at https://github.com/yzhangcs/crfpar.

Adapter Tuning, which freezes the pretrained language models (PLMs) and only fine-tunes a few extra modules, becomes an appealing efficient alternative to the full model fine-tuning. Although computationally efficient, the recent Adapters often increase parameters (e.g. bottleneck dimension) for matching the performance of full model fine-tuning, which we argue goes against their original intention. In this work, we re-examine the parameter-efficiency of Adapters through the lens of network pruning (we name such plug-in concept as SparseAdapter) and find that SparseAdapter can achieve comparable or better performance than standard Adapters when the sparse ratio reaches up to 80\%. Based on our findings, we introduce an easy but effective setting ``Large-Sparse'' to improve the model capacity of Adapters under the same parameter budget. Experiments on five competitive Adapters upon three advanced PLMs show that with proper sparse method (e.g. SNIP) and ratio (e.g. 40\%) SparseAdapter can consistently outperform their corresponding counterpart. Encouragingly, with the Large-Sparse setting, we can obtain further appealing gains, even outperforming the full fine-tuning by a large margin. Our code will be released at: https://github.com/Shwai-He/SparseAdapter.

We present ACAR (Adaptive Complexity and Attribution Routing), a measurement framework for studying multi-model orchestration under auditable conditions. ACAR uses self-consistency variance (sigma) computed from N=3 probe samples to route tasks across single-model, two-model, and three-model execution modes. The system is implemented on top of TEAMLLM, a deterministic execution substrate with immutable artifacts and complete decision traces. We evaluate ACAR on 1,510 tasks spanning four benchmarks: MathArena, Reasoning Gym, LiveCodeBench, and SuperGPQA, using Claude Sonnet 4, GPT-4o, and Gemini 2.0 Flash, producing more than 7,550 auditable runs. Results show that sigma-based routing achieves 55.6 percent accuracy, exceeding the two-model baseline of 54.4 percent while avoiding full ensembling on 54.2 percent of tasks. The routing mechanism is model-agnostic and requires no learned components. We also document negative results. First, retrieval augmentation reduced accuracy by 3.4 percentage points, as median retrieval similarity was only 0.167, demonstrating that experience injection without semantic alignment introduces noise rather than grounding. Second, when models agree on incorrect answers (sigma equals zero), no downstream ensemble can recover; this agreement-but-wrong failure mode is intrinsic to self-consistency and bounds achievable accuracy at approximately eight percentage points below full ensembling. Third, attribution estimates based on proxy signals such as response similarity and entropy showed weak correlation with ground-truth leave-one-out values, indicating that practical attribution requires explicit counterfactual computation. This work documents which assumptions fail in practice and provides falsifiable baselines for future research on routing, retrieval, and multi-model attribution.

A correctly reconstructed distant point appears uncertain even when a frozen 3D model processes equivalent inputs because its output frame rotates fractionally. This exposes a weakness of trainingfree perturbation uncertainty: when outputs contain an unobserved symmetry, run-to-run variation potentially reflects symmetry rather than error. Existing alternatives have trade-offs: built-in confidence is outperformed in most evaluated conditions, while trained evidential heads require modelspecific supervision. For point maps, this research derives a closed-form, error-independent variance term that grows with scene extent and potentially overwhelms the desired signal. Simulation reproduces the effect; all 30 real VGGT view-sets tested exhibit its predicted |x_p|^2 signature. ReVar3R robustly registers predictions to a common similarity frame before computing per-point variance, without retraining or modifying the frozen model. Optional calibration and fusion use a held-out split. Across VGGT, π3, and MASt3R on six datasets, the same estimator on every backbone lowers AUSE below built-in confidence in 15 of 18 conditions. The staged evaluation yields 11 of 18 wins for the label-free core, 12/18 for label-free equal-weight fusion, 14/18 with held-out weights, and 15/18 when the built-in signal is included. Against a trained evidential head, the result is a trade-off: the head calibrates magnitude better and leads in its training domain, whereas ReVar3R transfers across backbones without adaptation. Its ranking improves point filtering, but it does not detect stable systematic bias, aid novel-view synthesis, or transfer calibration across domains.

Despite its fruitful applications in remote sensing, image super-resolution is troublesome to train and deploy as it handles different resolution magnifications with separate models. Accordingly, we propose a highly-applicable super-resolution framework called FunSR, which settles different magnifications with a unified model by exploiting context interaction within implicit function space. FunSR composes a functional representor, a functional interactor, and a functional parser. Specifically, the representor transforms the low-resolution image from Euclidean space to multi-scale pixel-wise function maps; the interactor enables pixel-wise function expression with global dependencies; and the parser, which is parameterized by the interactor's output, converts the discrete coordinates with additional attributes to RGB values. Extensive experimental results demonstrate that FunSR reports state-of-the-art performance on both fixed-magnification and continuous-magnification settings, meanwhile, it provides many friendly applications thanks to its unified nature.

We introduce MapAnything, a unified transformer-based feed-forward model that ingests one or more images along with optional geometric inputs such as camera intrinsics, poses, depth, or partial reconstructions, and then directly regresses the metric 3D scene geometry and cameras. MapAnything leverages a factored representation of multi-view scene geometry, i.e., a collection of depth maps, local ray maps, camera poses, and a metric scale factor that effectively upgrades local reconstructions into a globally consistent metric frame. Standardizing the supervision and training across diverse datasets, along with flexible input augmentation, enables MapAnything to address a broad range of 3D vision tasks in a single feed-forward pass, including uncalibrated structure-from-motion, calibrated multi-view stereo, monocular depth estimation, camera localization, depth completion, and more. We provide extensive experimental analyses and model ablations demonstrating that MapAnything outperforms or matches specialist feed-forward models while offering more efficient joint training behavior, thus paving the way toward a universal 3D reconstruction backbone.

We introduce Aligner, a novel Parameter-Efficient Fine-Tuning (PEFT) method for aligning multi-billion-parameter-sized Large Language Models (LLMs). Aligner employs a unique design that constructs a globally shared set of tunable tokens that modify the attention of every layer. Remarkably with this method, even when using one token accounting for a mere 5,000 parameters, Aligner can still perform comparably well to state-of-the-art LLM adaptation methods like LoRA that require millions of parameters. This capacity is substantiated in both instruction following and value alignment tasks. Besides the multiple order-of-magnitude improvement in parameter efficiency, the insight Aligner provides into the internal mechanisms of LLMs is also valuable. The architectural features and efficacy of our method, in addition to our experiments demonstrate that an LLM separates its internal handling of "form" and "knowledge" in a somewhat orthogonal manner. This finding promises to motivate new research into LLM mechanism understanding and value alignment.

Developing accurate and reliable models for forest types mapping is critical to support efforts for halting deforestation and for biodiversity conservation (such as European Union Deforestation Regulation (EUDR)). This work introduces ForTy, a benchmark for global-scale FORest TYpes mapping using multi-temporal satellite data1. The benchmark comprises 200,000 time series of image patches, each consisting of Sentinel-2, Sentinel-1, climate, and elevation data. Each time series captures variations at monthly or seasonal cadence. Per-pixel annotations, including forest types and other land use classes, support image segmentation tasks. Unlike most existing land use products that often categorize all forest areas into a single class, our benchmark differentiates between three forest types classes: natural forest, planted forest, and tree crops. By leveraging multiple public data sources, we achieve global coverage with this benchmark. We evaluate the forest types dataset using several baseline models, including convolution neural networks and transformer-based models. Additionally, we propose a novel transformer-based model specifically designed to handle multi-modal, multi-temporal satellite data for forest types mapping. Our experimental results demonstrate that the proposed model surpasses the baseline models in performance.

Recent advancements in function calling and tool use have significantly enhanced the capabilities of large language models (LLMs) by enabling them to interact with external information sources and execute complex tasks. However, the limited context window of LLMs presents challenges when a large number of tools are available, necessitating efficient methods to manage prompt length and maintain accuracy. Existing approaches, such as fine-tuning LLMs or leveraging their reasoning capabilities, either require frequent retraining or incur significant latency overhead. A more efficient solution involves training smaller models to retrieve the most relevant tools for a given query, although this requires high quality, domain-specific data. To address those challenges, we present a novel framework for generating synthetic data for tool retrieval applications and an efficient data-driven tool retrieval strategy using small encoder models. Empowered by LLMs, we create ToolBank, a new tool retrieval dataset that reflects real human user usages. For tool retrieval methodologies, we propose novel approaches: (1) Tool2Vec: usage-driven tool embedding generation for tool retrieval, (2) ToolRefiner: a staged retrieval method that iteratively improves the quality of retrieved tools, and (3) MLC: framing tool retrieval as a multi-label classification problem. With these new methods, we achieve improvements of up to 27.28 in Recall@K on the ToolBench dataset and 30.5 in Recall@K on ToolBank. Additionally, we present further experimental results to rigorously validate our methods. Our code is available at https://github.com/SqueezeAILab/Tool2Vec

Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

Let T be a rooted and weighted tree, where the weight of any node is equal to the sum of the weights of its children. The popular Treemap algorithm visualizes such a tree as a hierarchical partition of a square into rectangles, where the area of the rectangle corresponding to any node in T is equal to the weight of that node. The aspect ratio of the rectangles in such a rectangular partition necessarily depends on the weights and can become arbitrarily high. We introduce a new hierarchical partition scheme, called a polygonal partition, which uses convex polygons rather than just rectangles. We present two methods for constructing polygonal partitions, both having guarantees on the worst-case aspect ratio of the constructed polygons; in particular, both methods guarantee a bound on the aspect ratio that is independent of the weights of the nodes. We also consider rectangular partitions with slack, where the areas of the rectangles may differ slightly from the weights of the corresponding nodes. We show that this makes it possible to obtain partitions with constant aspect ratio. This result generalizes to hyper-rectangular partitions in R^d. We use these partitions with slack for embedding ultrametrics into d-dimensional Euclidean space: we give a rm polylog(Delta)-approximation algorithm for embedding n-point ultrametrics into R^d with minimum distortion, where Delta denotes the spread of the metric, i.e., the ratio between the largest and the smallest distance between two points. The previously best-known approximation ratio for this problem was polynomial in n. This is the first algorithm for embedding a non-trivial family of weighted-graph metrics into a space of constant dimension that achieves polylogarithmic approximation ratio.

Persistent homology (PH) provides topological descriptors for geometric data, such as weighted graphs, which are interpretable, stable to perturbations, and invariant under, e.g., relabeling. Most applications of PH focus on the one-parameter case -- where the descriptors summarize the changes in topology of data as it is filtered by a single quantity of interest -- and there is now a wide array of methods enabling the use of one-parameter PH descriptors in data science, which rely on the stable vectorization of these descriptors as elements of a Hilbert space. Although the multiparameter PH (MPH) of data that is filtered by several quantities of interest encodes much richer information than its one-parameter counterpart, the scarceness of stability results for MPH descriptors has so far limited the available options for the stable vectorization of MPH. In this paper, we aim to bring together the best of both worlds by showing how the interpretation of signed barcodes -- a recent family of MPH descriptors -- as signed measures leads to natural extensions of vectorization strategies from one parameter to multiple parameters. The resulting feature vectors are easy to define and to compute, and provably stable. While, as a proof of concept, we focus on simple choices of signed barcodes and vectorizations, we already see notable performance improvements when comparing our feature vectors to state-of-the-art topology-based methods on various types of data.

Large language models (LLMs) have achieved remarkable progress in automatic code generation, yet their ability to produce high-performance code remains limited--a critical requirement in real-world software systems. We argue that current LLMs struggle not only due to data scarcity but, more importantly, because they lack supervision that guides interpretable and effective performance improvements. In this work, we introduce PerfCoder, a family of LLMs specifically designed to generate performance-enhanced code from source code via interpretable, customized optimizations. PerfCoder is fine-tuned on a curated collection of real-world optimization trajectories with human-readable annotations, and preference-aligned by reinforcement fine-tuning using runtime measurements, enabling it to propose input-specific improvement strategies and apply them directly without relying on iterative refinement. On the PIE code performance benchmark, PerfCoder surpasses all existing models in both runtime speedup and effective optimization rate, demonstrating that performance optimization cannot be achieved by scale alone but requires optimization stratetgy awareness. In addition, PerfCoder can generate interpretable feedback about the source code, which, when provided as input to a larger LLM in a planner-and-optimizer cooperative workflow, can further improve outcomes. Specifically, we elevate the performance of 32B models and GPT-5 to new levels on code optimization, substantially surpassing their original performance.