Daily Papers

Hybrid linear attention models offer an appealing path to faster long-context inference: they reduce the quadratic cost and KV-cache burden of full softmax attention while retaining much of the quality of Transformer models. A practical way to obtain such models is to convert a pretrained Transformer instead of pretraining a new architecture from scratch, but this conversion is still brittle. Simply copying the teacher attention projections into a Gated DeltaNet (GDN) student does not specify the new recurrent decay, write, and output-gating dynamics. As a result, the converted model often starts in a poor dynamical regime and must spend many distillation tokens repairing initialization rather than learning the remaining teacher behavior. We propose Taylor-Calibrate, a lightweight initialization method for hybrid GDN students. The method uses Taylor-guided teacher attention statistics to set the value projection, memory timescale, write gates, and output gate, then applies a short per-layer alignment step to match each converted layer to the teacher output. Across four teacher settings and three retained-layer policies, Taylor-Calibrate gives substantially stronger zero-shot students, with up to an 88x improvement in a representative ablation, and reaches matched recovery targets with 4.9x--9.2x fewer training tokens than naive conversion.

Effectively processing long contexts remains a fundamental yet unsolved challenge for large language models (LLMs). Existing single-LLM-based methods primarily reduce the context window or optimize the attention mechanism, but they often encounter additional computational costs or constrained expanded context length. While multi-agent-based frameworks can mitigate these limitations, they remain susceptible to the accumulation of errors and the propagation of hallucinations. In this work, we draw inspiration from the Long Short-Term Memory (LSTM) architecture to design a Multi-Agent System called LSTM-MAS, emulating LSTM's hierarchical information flow and gated memory mechanisms for long-context understanding. Specifically, LSTM-MAS organizes agents in a chained architecture, where each node comprises a worker agent for segment-level comprehension, a filter agent for redundancy reduction, a judge agent for continuous error detection, and a manager agent for globally regulates information propagation and retention, analogous to LSTM and its input gate, forget gate, constant error carousel unit, and output gate. These novel designs enable controlled information transfer and selective long-term dependency modeling across textual segments, which can effectively avoid error accumulation and hallucination propagation. We conducted an extensive evaluation of our method. Compared with the previous best multi-agent approach, CoA, our model achieves improvements of 40.93%, 43.70%,121.57% and 33.12%, on NarrativeQA, Qasper, HotpotQA, and MuSiQue, respectively.

Ranking model plays an essential role in e-commerce search and recommendation. An effective ranking model should give a personalized ranking list for each user according to the user preference. Existing algorithms usually extract a user representation vector from the user behavior sequence, then feed the vector into a feed-forward network (FFN) together with other features for feature interactions, and finally produce a personalized ranking score. Despite tremendous progress in the past, there is still room for improvement. Firstly, the personalized patterns of feature interactions for different users are not explicitly modeled. Secondly, most of existing algorithms have poor personalized ranking results for long-tail users with few historical behaviors due to the data sparsity. To overcome the two challenges, we propose Attention Weighted Mixture of Experts (AW-MoE) with contrastive learning for personalized ranking. Firstly, AW-MoE leverages the MoE framework to capture personalized feature interactions for different users. To model the user preference, the user behavior sequence is simultaneously fed into expert networks and the gate network. Within the gate network, one gate unit and one activation unit are designed to adaptively learn the fine-grained activation vector for experts using an attention mechanism. Secondly, a random masking strategy is applied to the user behavior sequence to simulate long-tail users, and an auxiliary contrastive loss is imposed to the output of the gate network to improve the model generalization for these users. This is validated by a higher performance gain on the long-tail user test set. Experiment results on a JD real production dataset and a public dataset demonstrate the effectiveness of AW-MoE, which significantly outperforms state-of-art methods. Notably, AW-MoE has been successfully deployed in the JD e-commerce search engine, ...

Several variants of the Long Short-Term Memory (LSTM) architecture for recurrent neural networks have been proposed since its inception in 1995. In recent years, these networks have become the state-of-the-art models for a variety of machine learning problems. This has led to a renewed interest in understanding the role and utility of various computational components of typical LSTM variants. In this paper, we present the first large-scale analysis of eight LSTM variants on three representative tasks: speech recognition, handwriting recognition, and polyphonic music modeling. The hyperparameters of all LSTM variants for each task were optimized separately using random search, and their importance was assessed using the powerful fANOVA framework. In total, we summarize the results of 5400 experimental runs (approx 15 years of CPU time), which makes our study the largest of its kind on LSTM networks. Our results show that none of the variants can improve upon the standard LSTM architecture significantly, and demonstrate the forget gate and the output activation function to be its most critical components. We further observe that the studied hyperparameters are virtually independent and derive guidelines for their efficient adjustment.

Interpretability researchers have attempted to understand MLP neurons of language models based on both the contexts in which they activate and their output weight vectors. They have paid little attention to a complementary aspect: the interactions between input and output. For example, when neurons detect a direction in the input, they might add much the same direction to the residual stream ("enrichment neurons") or reduce its presence ("depletion neurons"). We address this aspect by examining the cosine similarity between input and output weights of a neuron. We apply our method to 12 models and find that enrichment neurons dominate in early-middle layers whereas later layers tend more towards depletion. To explain this finding, we argue that enrichment neurons are largely responsible for enriching concept representations, one of the first steps of factual recall. Our input-output perspective is a complement to activation-dependent analyses and to approaches that treat input and output separately.

Sparse Autoencoders (SAEs) extract interpretable features from Large Language Models, but standard variants enforce non-negativity, forcing separate latents for diametrically opposed concepts (e.g., "pressure too high" vs. "pressure too low") and wasting dictionary capacity when features are anticorrelated. We propose the Sign-Aware Gated SAE (SA-GSAE): two-sided gated sparsity with signed magnitude and auxiliary supervision. A polarity-sensitive gate selects support on either sign, a signed-magnitude path avoids L1 shrinkage, and an auxiliary reconstruction prevents gate collapse. Bipolar sharing - one latent encoding both signs along a shared direction - is realised via a new Bi-Jump-ReLU activation; parameter accounting shows sign-awareness stays parameter-efficient even when anticorrelated pairs are rare. On real LLM activations across three mid-depth hookpoints on Pythia-1B and SmolLM3-3B (6 cells, 3 seeds), a half-width SA-GSAE at width H strictly Pareto-dominates a full-width Gated SAE at 2H over the entire swept L0 overlap on 3 of 6 cells (both MLP-output hookpoints and resid-mid/Pythia-1B); on the remaining 3 it matches R^2 within 0.025 (max gap -0.008) while cutting dead fraction by 0.35-0.62 absolute. Sweep-geomean dead-fraction reductions are ~100x-500x on MLP-output cells and Pythia-1B resid, ~2x-4x on attention cells and SmolLM3-3B resid. Ablations show the two-sided gate and auxiliary loss are load-bearing (no auxiliary collapses LR to 0.27, 98% dead); tying r_i^+ = r_i^- is indistinguishable (|Delta R^2| = 0.0015), and we recommend this symmetric variant as default. MLP-output gains come from most latents carrying both polarities; on attention, bipolar structure concentrates in a small set of top latents. Full-width SA-GSAE exhibits a reproducible reconstruction collapse at SmolLM3-3B resid that the half-width entirely avoids.

A method is presented for accelerating inference in transformer language models by exploiting the low effective rank of the token activation manifold at each layer. The method decomposes each activation vector into a subspace component and a residual, computes the linear-layer output on the subspace component via a cached low-rank weight image at reduced memory bandwidth, and applies a per-token gate that determines whether the residual correction is computed or skipped. The gate ensures that the output distribution is preserved to within a controllable tolerance. Validation on three model families (GPT-2 124M, GPT-J 6B, OPT 6.7B) on AMD MI300X demonstrates effective speedups of 3.0x to 10.5x on linear-layer weight reads with perplexity ratios below 1.00 and top-1 token agreement above 98%. The method requires no retraining, no architectural modification, and no approximation of the attention mechanism. At the operating point (k = 256, ε = 0.05) on GPT-J 14 6B, the accelerated model produces character-for-character identical output to the baseline.

Transformers have surpassed RNNs in popularity due to their superior abilities in parallel training and long-term dependency modeling. Recently, there has been a renewed interest in using linear RNNs for efficient sequence modeling. These linear RNNs often employ gating mechanisms in the output of the linear recurrence layer while ignoring the significance of using forget gates within the recurrence. In this paper, we propose a gated linear RNN model dubbed Hierarchically Gated Recurrent Neural Network (HGRN), which includes forget gates that are lower bounded by a learnable value. The lower bound increases monotonically when moving up layers. This allows the upper layers to model long-term dependencies and the lower layers to model more local, short-term dependencies. Experiments on language modeling, image classification, and long-range arena benchmarks showcase the efficiency and effectiveness of our proposed model. The source code is available at https://github.com/OpenNLPLab/HGRN.

Segmentation of biomedical images can assist radiologists to make a better diagnosis and take decisions faster by helping in the detection of abnormalities, such as tumors. Manual or semi-automated segmentation, however, can be a time-consuming task. Most deep learning based automated segmentation methods are supervised and rely on manually segmented ground-truth. A possible solution for the problem would be an unsupervised deep learning based approach for automated segmentation, which this research work tries to address. We use a W-Net architecture and modified it, such that it can be applied to 3D volumes. In addition, to suppress noise in the segmentation we added attention gates to the skip connections. The loss for the segmentation output was calculated using soft N-Cuts and for the reconstruction output using SSIM. Conditional Random Fields were used as a post-processing step to fine-tune the results. The proposed method has shown promising results, with a dice coefficient of 0.88 for the liver segmentation compared against manual segmentation.

Document binarization is a key pre-processing step for many document analysis tasks. However, existing methods can not extract stroke edges finely, mainly due to the fair-treatment nature of vanilla convolutions and the extraction of stroke edges without adequate supervision by boundary-related information. In this paper, we formulate text extraction as the learning of gating values and propose an end-to-end gated convolutions-based network (GDB) to solve the problem of imprecise stroke edge extraction. The gated convolutions are applied to selectively extract the features of strokes with different attention. Our proposed framework consists of two stages. Firstly, a coarse sub-network with an extra edge branch is trained to get more precise feature maps by feeding a priori mask and edge. Secondly, a refinement sub-network is cascaded to refine the output of the first stage by gated convolutions based on the sharp edge. For global information, GDB also contains a multi-scale operation to combine local and global features. We conduct comprehensive experiments on ten Document Image Binarization Contest (DIBCO) datasets from 2009 to 2019. Experimental results show that our proposed methods outperform the state-of-the-art methods in terms of all metrics on average and achieve top ranking on six benchmark datasets.

Gated Recurrent Unit (GRU) is a recently-developed variation of the long short-term memory (LSTM) unit, both of which are types of recurrent neural network (RNN). Through empirical evidence, both models have been proven to be effective in a wide variety of machine learning tasks such as natural language processing (Wen et al., 2015), speech recognition (Chorowski et al., 2015), and text classification (Yang et al., 2016). Conventionally, like most neural networks, both of the aforementioned RNN variants employ the Softmax function as its final output layer for its prediction, and the cross-entropy function for computing its loss. In this paper, we present an amendment to this norm by introducing linear support vector machine (SVM) as the replacement for Softmax in the final output layer of a GRU model. Furthermore, the cross-entropy function shall be replaced with a margin-based function. While there have been similar studies (Alalshekmubarak & Smith, 2013; Tang, 2013), this proposal is primarily intended for binary classification on intrusion detection using the 2013 network traffic data from the honeypot systems of Kyoto University. Results show that the GRU-SVM model performs relatively higher than the conventional GRU-Softmax model. The proposed model reached a training accuracy of ~81.54% and a testing accuracy of ~84.15%, while the latter was able to reach a training accuracy of ~63.07% and a testing accuracy of ~70.75%. In addition, the juxtaposition of these two final output layers indicate that the SVM would outperform Softmax in prediction time - a theoretical implication which was supported by the actual training and testing time in the study.

We introduce Gated-SwinRMT, a family of hybrid vision transformers that combine the shifted-window attention of the Swin Transformer with the Manhattan-distance spatial decay of Retentive Networks (RMT), augmented by input-dependent gating. Self-attention is decomposed into consecutive width-wise and height-wise retention passes within each shifted window, where per-head exponential decay masks provide a two-dimensional locality prior without learned positional biases. Two variants are proposed. Gated-SwinRMT-SWAT substitutes softmax with sigmoid activation, implements balanced ALiBi slopes with multiplicative post-activation spatial decay, and gates the value projection via SwiGLU; the Normalized output implicitly suppresses uninformative attention scores. Gated-SwinRMT-Retention retains softmax-normalized retention with an additive log-space decay bias and incorporates an explicit G1 sigmoid gate -- projected from the block input and applied after local context enhancement (LCE) but prior to the output projection~W_O -- to alleviate the low-rank W_V !cdot! W_O bottleneck and enable input-dependent suppression of attended outputs. We assess both variants on Mini-ImageNet (224{times}224, 100 classes) and CIFAR-10 (32{times}32, 10 classes) under identical training protocols, utilizing a single GPU due to resource limitations. At {approx}77--79\,M parameters, Gated-SwinRMT-SWAT achieves 80.22% and Gated-SwinRMT-Retention 78.20% top-1 test accuracy on Mini-ImageNet, compared with 73.74% for the RMT baseline. On CIFAR-10 -- where small feature maps cause the adaptive windowing mechanism to collapse attention to global scope -- the accuracy advantage compresses from +6.48\,pp to +0.56\,pp.

Large language models (LLMs) often experience language confusion, which is the unintended mixing of languages during text generation. Current solutions to this problem either necessitate model retraining or cannot differentiate between harmful confusion and acceptable code-switching. This paper introduces the Language Confusion Gate (LCG), a lightweight, plug-in solution that filters tokens during decoding without altering the base LLM. The LCG is trained using norm-adjusted self-distillation to predict appropriate language families and apply masking only when needed. Our method is based on the findings that language confusion is infrequent, correct-language tokens are usually among the top predictions, and output token embedding norms are larger for high-resource languages, which biases sampling. When evaluated across various models, including Qwen3, GPT-OSS, Gemma3, Llama3.1, LCG decreases language confusion significantly, often by an order of magnitude, without negatively impacting task performance. Code is available at https://github.com/collinzrj/language_confusion_gate.

Transformers with linear attention allow for efficient parallel training but can simultaneously be formulated as an RNN with 2D (matrix-valued) hidden states, thus enjoying linear (with respect to output length) inference complexity. Recent works such as RetNet (Sun et al., 2023) and TransNormerLLM (Qin et al., 2023a) observe that adding a global decay term to the additive RNN update rule greatly improves performance, sometimes outperforming standard Transformers with softmax attention when trained at scale. In this work we show that adding a data-dependent gating mechanism further improves performance. We derive a parallel form of this gated linear attention layer that enables efficient training. However, a straightforward, numerically stable implementation of this parallel form requires generalized matrix multiplications in log-space for numerical stability, and thus cannot take advantage of tensor cores on modern GPUs which are optimized for standard matrix multiplications. We develop a hardware-efficient version of the parallel form that can still make use of tensor cores through block-parallel computations over sequence chunks. Experiments on moderate-scale language modeling (340M-parameter models trained on 15B tokens, 1.3B-parameter models trained on 100B tokens) show that gated linear attention (GLA) Transformers perform competitively against a strong LLaMA-architecture Transformer baseline (Touvron et al., 2023) as well as Mamba (Gu & Dao, 2023), a recently introduced state-space model with a data-dependent state transition mechanism. For training speed, our Triton-based implementation performs comparably to CUDA-optimized FlashAttention-2 (Dao, 2023) under the regular 2048 training length setting, while outperforming FlashAttention-2 when training on longer sequences beyond 4096.

In this paper, we present the practical problems and the lessons learned at short-video services from Kuaishou. In industry, a widely-used multi-task framework is the Mixture-of-Experts (MoE) paradigm, which always introduces some shared and specific experts for each task and then uses gate networks to measure related experts' contributions. Although the MoE achieves remarkable improvements, we still observe three anomalies that seriously affect model performances in our iteration: (1) Expert Collapse: We found that experts' output distributions are significantly different, and some experts have over 90% zero activations with ReLU, making it hard for gate networks to assign fair weights to balance experts. (2) Expert Degradation: Ideally, the shared-expert aims to provide predictive information for all tasks simultaneously. Nevertheless, we find that some shared-experts are occupied by only one task, which indicates that shared-experts lost their ability but degenerated into some specific-experts. (3) Expert Underfitting: In our services, we have dozens of behavior tasks that need to be predicted, but we find that some data-sparse prediction tasks tend to ignore their specific-experts and assign large weights to shared-experts. The reason might be that the shared-experts can perceive more gradient updates and knowledge from dense tasks, while specific-experts easily fall into underfitting due to their sparse behaviors. Motivated by those observations, we propose HoME to achieve a simple, efficient and balanced MoE system for multi-task learning.

Attention-based Multiple Instance Learning aggregators in medical imaging are prone to attention concentration, producing overconfident and unstable predictions. We introduce QG-MIL, a gated transformer aggregator that addresses this through four synergistic architectural components: RMSNorm-based pre-normalization, per-head QK normalization, fine-grained attention output gating, and SwiGLU-style feed-forward modules. Together, these design choices stabilize training and distribute attention more uniformly across instances without auxiliary losses, masking, or multi-stage regularization. We evaluate QG-MIL across six benchmarks spanning whole-slide pathology and cell-level hematology, covering two fundamentally different MIL scales. The best-performing QG-MIL variants outperform leading baselines on all six benchmarks, with an average improvement of +6.1 mean macro F1 points. Attention overlays and attention mass analysis confirm more distributed instance weighting. Ablation studies show that while individual components can match the full model on specific datasets, the QG-MIL design provides the most consistent cross-domain performance and tightest variance when compared to selected baselines. We release a configurable implementation to support reproducibility at: https://github.com/unica-visual-intelligence-lab/QG-MIL

A multi-agent pipeline with N agents typically issues N LLM calls per run. Merging agents into fewer calls (compound execution) promises token savings, but naively merged calls silently degrade quality through tool loss and prompt compression. We present Agent Capsules, an adaptive execution runtime that treats multi-agent pipeline execution as an optimization problem with empirical quality constraints. The runtime instruments coordination overhead per group, scores composition opportunity, selects among three compound execution strategies, and gates every mode switch on rolling-mean output quality. A controlled negative result confirms that injecting more context into a merged call worsens compression rather than relieving it, so the framework's escalation ladder (standard, then two-phase, then sequential) recovers quality by moving toward per-agent dispatch rather than by rewriting merged prompts. On LLM-judged quality, the controller matches a hand-tuned oracle on every measured (model, group, mode) cell: routing compound whenever the oracle would, and reverting to fine whenever quality would fail the floor, without per-model configuration. Against a hand-crafted LangGraph implementation of a 14-agent competitive intelligence pipeline, Agent Capsules uses 51% fewer fine-mode input tokens and 42% fewer compound-mode input tokens, at +0.020 and +0.017 quality respectively. Against a DSPy implementation of a 5-agent due diligence pipeline, the framework uses 19% fewer tokens than uncompiled DSPy at quality parity, and 68% fewer tokens than MIPROv2 at +0.052 quality. Even before compound mode fires, the runtime delivers efficiency through automatic policy resolution, cache-aligned prompts, and topology-aware context injection, matching both hand-tuned and compile-time baselines without training data or per-pipeline engineering.

We introduce GateSkip, a simple residual-stream gating mechanism that enables token-wise layer skipping in decoder-only LMs. Each Attention/MLP branch is equipped with a sigmoid-linear gate that condenses the branch's output before it re-enters the residual stream. During inference we rank tokens by the gate values and skip low-importance ones using a per-layer budget. While early-exit or router-based Mixture-of-Depths models are known to be unstable and need extensive retraining, our smooth, differentiable gates fine-tune stably on top of pretrained models. On long-form reasoning, we save up to 15\% compute while retaining over 90\% of baseline accuracy. On instruction-tuned models we see accuracy gains at full compute and match baseline quality near 50\% savings. The learned gates give insight into transformer information flow (e.g., BOS tokens act as anchors), and the method combines easily with quantization, pruning, and self-speculative decoding.

Architecture optimization, which is a technique for finding an efficient neural network that meets certain requirements, generally reduces to a set of multiple-choice selection problems among alternative sub-structures or parameters. The discrete nature of the selection problem, however, makes this optimization difficult. To tackle this problem we introduce a novel concept of a trainable gate function. The trainable gate function, which confers a differentiable property to discretevalued variables, allows us to directly optimize loss functions that include non-differentiable discrete values such as 0-1 selection. The proposed trainable gate can be applied to pruning. Pruning can be carried out simply by appending the proposed trainable gate functions to each intermediate output tensor followed by fine-tuning the overall model, using any gradient-based training methods. So the proposed method can jointly optimize the selection of the pruned channels while fine-tuning the weights of the pruned model at the same time. Our experimental results demonstrate that the proposed method efficiently optimizes arbitrary neural networks in various tasks such as image classification, style transfer, optical flow estimation, and neural machine translation.

Differentiable Logic Gate Networks (DLGNs) are a very fast and energy-efficient alternative to conventional feed-forward networks. With learnable combinations of logical gates, DLGNs enable fast inference by hardware-friendly execution. Since the concept of DLGNs has only recently gained attention, these networks are still in their developmental infancy, including the design and scalability of their output layer. To date, this architecture has primarily been tested on datasets with up to ten classes. This work examines the behavior of DLGNs on large multi-class datasets. We investigate its general expressiveness, its scalability, and evaluate alternative output strategies. Using both synthetic and real-world datasets, we provide key insights into the importance of temperature tuning and its impact on output layer performance. We evaluate conditions under which the Group-Sum layer performs well and how it can be applied to large-scale classification of up to 2000 classes.

This paper localizes the policy routing mechanism in alignment-trained language models. An intermediate-layer attention gate reads detected content and triggers deeper amplifier heads that boost the signal toward refusal. In smaller models the gate and amplifier are single heads; at larger scale they become bands of heads across adjacent layers. The gate contributes under 1% of output DLA, but interchange testing (p<0.001) and knockout cascade confirm it is causally necessary. Interchange screening at n>=120 detects the same motif in twelve models from six labs (2B to 72B), though specific heads differ by lab. Per-head ablation weakens up to 58x at 72B and misses gates that interchange identifies; interchange is the only reliable audit at scale. Modulating the detection-layer signal continuously controls policy from hard refusal through evasion to factual answering. On safety prompts the same intervention turns refusal into harmful guidance, showing the safety-trained capability is gated by routing rather than removed. Thresholds vary by topic and by input language, and the circuit relocates across generations within a family while behavioral benchmarks register no change. Routing is early-commitment: the gate commits at its own layer before deeper layers finish processing the input. Under an in-context substitution cipher, gate interchange necessity collapses 70 to 99% across three models and the model switches to puzzle-solving. Injecting the plaintext gate activation into the cipher forward pass restores 48% of refusals in Phi-4-mini, localizing the bypass to the routing interface. A second method, cipher contrast analysis, uses plain/cipher DLA differences to map the full cipher-sensitive routing circuit in O(3n) forward passes. Any encoding that defeats detection-layer pattern matching bypasses the policy regardless of whether deeper layers reconstruct the content.

Saliency maps are increasingly used as design guidance in siRNA efficacy prediction, yet attribution methods are rarely validated before motivating sequence edits. We introduce a pre-synthesis gate: a protocol for counterfactual sensitivity faithfulness that tests whether mutating high-saliency positions changes model output more than composition-matched controls. Cross-dataset transfer reveals two failure modes that would otherwise go undetected: faithful-but-wrong (saliency valid, predictions fail) and inverted saliency (top-saliency edits less impactful than random). Strikingly, models trained on mRNA-level assays collapse on a luciferase reporter dataset, demonstrating that protocol shifts can silently invalidate deployment. Across four benchmarks, 19/20 fold instances pass; the single failure shows inverted saliency. A biology-informed regularizer (BioPrior) strengthens saliency faithfulness with modest, dataset-dependent predictive trade-offs. Our results establish saliency validation as essential pre-deployment practice for explanation-guided therapeutic design. Code is available at https://github.com/shadi97kh/BioPrior.

We present a new method for separating a mixed audio sequence, in which multiple voices speak simultaneously. The new method employs gated neural networks that are trained to separate the voices at multiple processing steps, while maintaining the speaker in each output channel fixed. A different model is trained for every number of possible speakers, and the model with the largest number of speakers is employed to select the actual number of speakers in a given sample. Our method greatly outperforms the current state of the art, which, as we show, is not competitive for more than two speakers.

Mamba is an efficient sequence model that rivals Transformers and demonstrates significant potential as a foundational architecture for various tasks. Quantization is commonly used in neural networks to reduce model size and computational latency. However, applying quantization to Mamba remains underexplored, and existing quantization methods, which have been effective for CNN and Transformer models, appear inadequate for Mamba models (e.g., Quarot suffers a 21% accuracy drop on Vim-T^dagger even under W8A8). We have pioneered the exploration of this issue and identified several key challenges. First, significant outliers are present in gate projections, output projections, and matrix multiplications. Second, Mamba's unique parallel scan further amplifies these outliers, leading to uneven and heavy-tailed data distributions. Third, even with the application of the Hadamard transform, the variance across channels in weights and activations still remains inconsistent. To these ends, we propose MambaQuant, a post-training quantization (PTQ) framework consisting of: 1) Karhunen-Loeve Transformation (KLT) enhanced rotation, rendering the rotation matrix adaptable to diverse channel distributions. 2) Smooth-Fused rotation, which equalizes channel variances and can merge additional parameters into model weights. Experiments show that MambaQuant can quantize both weights and activations into 8-bit with less than 1% accuracy loss for Mamba-based vision and language tasks. To the best of our knowledge, MambaQuant is the first comprehensive PTQ design for the Mamba family, paving the way for further advancements in its application.

Quantum generative models use the intrinsic probabilistic nature of quantum mechanics to learn and reproduce complex probability distributions. In this paper, we present an implementation of a 3-qubit quantum circuit Born machine trained to model a 3-bit Gaussian distribution using a Kullback-Leibler (KL) divergence loss and parameter-shift gradient optimization. The variational quantum circuit consists of layers of parameterized rotations and entangling gates, and is optimized such that the Born rule output distribution closely matches the target distribution. We detail the mathematical formulation of the model distribution, the KL divergence cost function, and the parameter-shift rule for gradient evaluation. Training results on a statevector simulator show that the KL divergence is minimized to near zero, and the final generated distribution aligns quantitatively with the target probabilities. We analyze the convergence behavior and discuss the implications for scalability and quantum advantage. Our results demonstrate the feasibility of small-scale quantum generative learning and provide insight into the training dynamics of quantum circuit models.

We demonstrate that a single 3x3 convolutional kernel can produce emergent audio effects when trained on 200 samples from a personalized corpus. We achieve this through two key techniques: (1) Conditioning Aware Kernels (CAK), where output = input + (learned_pattern x control), with a soft-gate mechanism supporting identity preservation at zero control; and (2) AuGAN (Audit GAN), which reframes adversarial training from "is this real?" to "did you apply the requested value?" Rather than learning to generate or detect forgeries, our networks cooperate to verify control application, discovering unique transformations. The learned kernel exhibits a diagonal structure creating frequency-dependent temporal shifts that are capable of producing musical effects based on input characteristics. Our results show the potential of adversarial training to discover audio transformations from minimal data, enabling new approaches to effect design.

Dense-to-sparse gating mixture of experts (MoE) has recently become an effective alternative to a well-known sparse MoE. Rather than fixing the number of activated experts as in the latter model, which could limit the investigation of potential experts, the former model utilizes the temperature to control the softmax weight distribution and the sparsity of the MoE during training in order to stabilize the expert specialization. Nevertheless, while there are previous attempts to theoretically comprehend the sparse MoE, a comprehensive analysis of the dense-to-sparse gating MoE has remained elusive. Therefore, we aim to explore the impacts of the dense-to-sparse gate on the maximum likelihood estimation under the Gaussian MoE in this paper. We demonstrate that due to interactions between the temperature and other model parameters via some partial differential equations, the convergence rates of parameter estimations are slower than any polynomial rates, and could be as slow as O(1/log(n)), where n denotes the sample size. To address this issue, we propose using a novel activation dense-to-sparse gate, which routes the output of a linear layer to an activation function before delivering them to the softmax function. By imposing linearly independence conditions on the activation function and its derivatives, we show that the parameter estimation rates are significantly improved to polynomial rates.

The recently proposed Forgetting Transformer (FoX) incorporates a forget gate into softmax attention and has shown consistently better or on-par performance compared to the standard RoPE-based Transformer. Notably, many attention heads in FoX tend to forget quickly, causing their output at each timestep to rely primarily on the local context. Based on this observation, we propose Adaptive Computation Pruning (ACP) for FoX, a method that dynamically prunes computations involving input-output dependencies that are strongly decayed by the forget gate. This is achieved using a dynamically set pruning threshold that ensures that the pruned attention weights remain negligible. We apply ACP to language model pretraining with FoX and show it consistently reduces the number of FLOPs in softmax attention by around 70% across different model sizes and context lengths, resulting in a roughly 10% to 35% improvement in training throughput. Furthermore, longer context lengths yield greater computational savings. All these speed improvements are achieved without any performance degradation. We also perform several analyses to provide deeper insights into our method, such as examining the pruning patterns and analyzing the distribution of FLOP savings across different attention heads. Our code is available at https://github.com/zhixuan-lin/arctic-fox.

Modern machine learning is still largely organized around a single recipe: choose a parameterized model family and optimize its weights. Although highly successful, this paradigm is too narrow for many structured prediction problems, where the main bottleneck is not parameter fitting but discovering what should be computed from the data. Success often depends on identifying the right transformations, statistics, invariances, interaction structures, temporal summaries, gates, or nonlinear compositions, especially when objectives are non-differentiable, evaluation is cross-validation-based, interpretability matters, or continual adaptation is required. We present EvoForest, a hybrid neuro-symbolic system for end-to-end open-ended evolution of computation. Rather than merely generating features, EvoForest jointly evolves reusable computational structure, callable function families, and trainable low-dimensional continuous components inside a shared directed acyclic graph. Intermediate nodes store alternative implementations, callable nodes encode reusable transformation families such as projections, gates, and activations, output nodes define candidate predictive computations, and persistent global parameters can be refined by gradient descent. For each graph configuration, EvoForest evaluates the discovered computation and uses a lightweight Ridge-based readout to score the resulting representation against a non-differentiable cross-validation target. The evaluator also produces structured feedback that guides future LLM-driven mutations. In the 2025 ADIA Lab Structural Break Challenge, EvoForest reached 94.13% ROC-AUC after 600 evolution steps, exceeding the publicly reported winning score of 90.14% under the same evaluation protocol.

Spiking Neural Networks (SNNs) provide a promising framework for energy-efficient and biologically grounded computation; however, scalable learning in deep recurrent architectures with sparse connectivity remains a major challenge. In this work, we propose a structured multi-layer recurrent SNN architecture composed of locally dense recurrent layers augmented with sparse small-world long-range projections to a readout population. The long-range connectivity is largely fixed, preserving routing efficiency and hardware scalability, while synaptic adaptation is performed using strictly local plasticity mechanisms. To enable supervised learning without backpropagation or surrogate gradients, we introduce a biologically motivated learning framework that combines: (i) population-based winner-take-all (WTA) teaching signals at the output layer, (ii) fixed random broadcast alignment feedback pathways, and (iii) low-dimensional modulatory neuron populations that gate synaptic updates through three-factor learning rules with eligibility traces. This design supports deep recurrent computation with sparse global communication and purely local synaptic updates. We analyze the algorithmic properties, computational complexity, and hardware feasibility of the proposed approach, and demonstrate stable learning and competitive performance on benchmark classification tasks. The results highlight the potential of structured recurrence and neuromodulatory learning to enable scalable, hardware-compatible SNN training beyond gradient-based methods.

The Model Context Protocol (MCP) replaces static, developer-controlled API integrations with more dynamic, user-driven agent systems, which also introduces new security risks. As MCP adoption grows across community servers and major platforms, organizations encounter threats that existing AI governance frameworks (such as NIST AI RMF and ISO/IEC 42001) do not yet cover in detail. We focus on three types of adversaries that take advantage of MCP s flexibility: content-injection attackers that embed malicious instructions into otherwise legitimate data; supply-chain attackers who distribute compromised servers; and agents who become unintentional adversaries by over-stepping their role. Based on early incidents and proof-of-concept attacks, we describe how MCP can increase the attack surface through data-driven exfiltration, tool poisoning, and cross-system privilege escalation. In response, we propose a set of practical controls, including per-user authentication with scoped authorization, provenance tracking across agent workflows, containerized sandboxing with input/output checks, inline policy enforcement with DLP and anomaly detection, and centralized governance using private registries or gateway layers. The aim is to help organizations ensure that unvetted code does not run outside a sandbox, tools are not used beyond their intended scope, data exfiltration attempts are detectable, and actions can be audited end-to-end. We close by outlining open research questions around verifiable registries, formal methods for these dynamic systems, and privacy-preserving agent operations.

Large Language Models (LLMs) demonstrate remarkable capabilities, yet struggle with hallucination and outdated knowledge when tasked with complex knowledge reasoning, resulting in factually incorrect outputs. Previous studies have attempted to mitigate it by retrieving factual knowledge from large-scale knowledge graphs (KGs) to assist LLMs in logical reasoning and prediction of answers. However, this kind of approach often introduces noise and irrelevant data, especially in situations with extensive context from multiple knowledge aspects. In this way, LLM attention can be potentially mislead from question and relevant information. In our study, we introduce an Adaptive Multi-Aspect Retrieval-augmented over KGs (Amar) framework. This method retrieves knowledge including entities, relations, and subgraphs, and converts each piece of retrieved text into prompt embeddings. The Amar framework comprises two key sub-components: 1) a self-alignment module that aligns commonalities among entities, relations, and subgraphs to enhance retrieved text, thereby reducing noise interference; 2) a relevance gating module that employs a soft gate to learn the relevance score between question and multi-aspect retrieved data, to determine which information should be used to enhance LLMs' output, or even filtered altogether. Our method has achieved state-of-the-art performance on two common datasets, WebQSP and CWQ, showing a 1.9\% improvement in accuracy over its best competitor and a 6.6\% improvement in logical form generation over a method that directly uses retrieved text as context prompts. These results demonstrate the effectiveness of Amar in improving the reasoning of LLMs.

Modern neural networks demonstrate state-of-the-art performance on numerous existing benchmarks; however, their high computational requirements and energy consumption prompt researchers to seek more efficient solutions for real-world deployment. Logic gate networks (LGNs) learns a large network of logic gates for efficient image classification. However, learning a network that can solve a simple problem like CIFAR-10 can take days to weeks to train. Even then, almost half of the network remains unused, causing a discretization gap. This discretization gap hinders real-world deployment of LGNs, as the performance drop between training and inference negatively impacts accuracy. We inject Gumbel noise with a straight-through estimator during training to significantly speed up training, improve neuron utilization, and decrease the discretization gap. We theoretically show that this results from implicit Hessian regularization, which improves the convergence properties of LGNs. We train networks 4.5 times faster in wall-clock time, reduce the discretization gap by 98%, and reduce the number of unused gates by 100%.

A single two-input gate suffices for all of Boolean logic in digital hardware. No comparable primitive has been known for continuous mathematics: computing elementary functions such as sin, cos, sqrt, and log has always required multiple distinct operations. Here I show that a single binary operator, eml(x,y)=exp(x)-ln(y), together with the constant 1, generates the standard repertoire of a scientific calculator. This includes constants such as e, pi, and i; arithmetic operations including addition, subtraction, multiplication, division, and exponentiation as well as the usual transcendental and algebraic functions. For example, exp(x)=eml(x,1), ln(x)=eml(1,eml(eml(1,x),1)), and likewise for all other operations. That such an operator exists was not anticipated; I found it by systematic exhaustive search and established constructively that it suffices for the concrete scientific-calculator basis. In EML (Exp-Minus-Log) form, every such expression becomes a binary tree of identical nodes, yielding a grammar as simple as S -> 1 | eml(S,S). This uniform structure also enables gradient-based symbolic regression: using EML trees as trainable circuits with standard optimizers (Adam), I demonstrate the feasibility of exact recovery of closed-form elementary functions from numerical data at shallow tree depths up to 4. The same architecture can fit arbitrary data, but when the generating law is elementary, it may recover the exact formula.

Transformers have gained popularity in machine learning due to their application in the field of natural language processing. They manipulate and process text efficiently, capturing long-range dependencies among data and performing the next word prediction. On the other hand, gate-based quantum computing is based on controlling the register of qubits in the quantum hardware by applying a sequence of gates, a process which can be interpreted as a low level text programming language. We develop a transformer model capable of transpiling quantum circuits from the qasm standard to other sets of gates native suited for a specific target quantum hardware, in our case the set for the trapped-ion quantum computers of IonQ. The feasibility of a translation up to five qubits is demonstrated with a percentage of correctly transpiled target circuits equal or superior to 99.98%. Regardless the depth of the register and the number of gates applied, we prove that the complexity of the transformer model scales, in the worst case scenario, with a polynomial trend by increasing the depth of the register and the length of the circuit, allowing models with a higher number of parameters to be efficiently trained on HPC infrastructures.

As large language models (LLMs) like ChatGPT exhibited unprecedented machine intelligence, it also shows great performance in assisting hardware engineers to realize higher-efficiency logic design via natural language interaction. To estimate the potential of the hardware design process assisted by LLMs, this work attempts to demonstrate an automated design environment that explores LLMs to generate hardware logic designs from natural language specifications. To realize a more accessible and efficient chip development flow, we present a scalable four-stage zero-code logic design framework based on LLMs without retraining or finetuning. At first, the demo, ChipGPT, begins by generating prompts for the LLM, which then produces initial Verilog programs. Second, an output manager corrects and optimizes these programs before collecting them into the final design space. Eventually, ChipGPT will search through this space to select the optimal design under the target metrics. The evaluation sheds some light on whether LLMs can generate correct and complete hardware logic designs described by natural language for some specifications. It is shown that ChipGPT improves programmability, and controllability, and shows broader design optimization space compared to prior work and native LLMs alone.

Differentiable logic gate networks (DLGNs) exhibit extraordinary efficiency at inference while sustaining competitive accuracy. But vanishing gradients, discretization errors, and high training cost impede scaling these networks. Even with dedicated parameter initialization schemes from subsequent works, increasing depth still harms accuracy. We show that the root cause of these issues lies in the underlying parametrization of logic gate neurons themselves. To overcome this issue, we propose a reparametrization that also shrinks the parameter size logarithmically in the number of inputs per gate. For binary inputs, this already reduces the model size by 4x, speeds up the backward pass by up to 1.86x, and converges in 8.5x fewer training steps. On top of that, we show that the accuracy on CIFAR-100 remains stable and sometimes superior to the original parametrization.

Implementing Boolean functions with circuits consisting of logic gates is fundamental in digital computer design. However, the implemented circuit must be exactly equivalent, which hinders generative neural approaches on this task due to their occasionally wrong predictions. In this study, we introduce a generative neural model, the "Circuit Transformer", which eliminates such wrong predictions and produces logic circuits strictly equivalent to given Boolean functions. The main idea is a carefully designed decoding mechanism that builds a circuit step-by-step by generating tokens, which has beneficial "cutoff properties" that block a candidate token once it invalidate equivalence. In such a way, the proposed model works similar to typical LLMs while logical equivalence is strictly preserved. A Markov decision process formulation is also proposed for optimizing certain objectives of circuits. Experimentally, we trained an 88-million-parameter Circuit Transformer to generate equivalent yet more compact forms of input circuits, outperforming existing neural approaches on both synthetic and real world benchmarks, without any violation of equivalence constraints.

Gate set tomography (GST) is a protocol for detailed, predictive characterization of logic operations (gates) on quantum computing processors. Early versions of GST emerged around 2012-13, and since then it has been refined, demonstrated, and used in a large number of experiments. This paper presents the foundations of GST in comprehensive detail. The most important feature of GST, compared to older state and process tomography protocols, is that it is calibration-free. GST does not rely on pre-calibrated state preparations and measurements. Instead, it characterizes all the operations in a gate set simultaneously and self-consistently, relative to each other. Long sequence GST can estimate gates with very high precision and efficiency, achieving Heisenberg scaling in regimes of practical interest. In this paper, we cover GST's intellectual history, the techniques and experiments used to achieve its intended purpose, data analysis, gauge freedom and fixing, error bars, and the interpretation of gauge-fixed estimates of gate sets. Our focus is fundamental mathematical aspects of GST, rather than implementation details, but we touch on some of the foundational algorithmic tricks used in the pyGSTi implementation.

Multi-controlled single-target (MC) gates are some of the most crucial building blocks for varied quantum algorithms. How to implement them optimally is thus a pivotal question. To answer this question in an architecture-independent manner, and to get a worst-case estimate, we should look at a linear nearest-neighbor (LNN) architecture, as this can be embedded in almost any qubit connectivity. Motivated by the above, here we describe a method which implements MC gates using no more than sim 4k+8n CNOT gates -- up-to 60% reduction over state-of-the-art -- while allowing for complete flexibility to choose the locations of n controls, the target, and a dirty ancilla out of k qubits. More strikingly, in case k approx n, our upper bound is sim 12n -- the best known for unrestricted connectivity -- and if n = 1, our upper bound is sim 4k -- the best known for a single long-range CNOT gate over k qubits -- therefore, if our upper bound can be reduced, then the cost of one or both of these simpler versions of MC gates will be immediately reduced accordingly. In practice, our method provides circuits that tend to require fewer CNOT gates than our upper bound for almost any given instance of MC gates.

Large Language Models (LLMs) have shown great promise in tool-making, yet existing frameworks often struggle to efficiently construct reliable toolsets and are limited to single-task settings. To address these challenges, we propose GATE (Graph-based Adaptive Tool Evolution), an adaptive framework that dynamically constructs and evolves a hierarchical graph of reusable tools across multiple scenarios. We evaluate GATE on open-ended tasks (Minecraft), agent-based tasks (TextCraft, DABench), and code generation tasks (MATH, Date, TabMWP). Our results show that GATE achieves up to 4.3x faster milestone completion in Minecraft compared to the previous SOTA, and provides an average improvement of 9.23% over existing tool-making methods in code generation tasks and 10.03% in agent tasks. GATE demonstrates the power of adaptive evolution, balancing tool quantity, complexity, and functionality while maintaining high efficiency. Code and data are available at https://github.com/ayanami2003/GATE.

Bosonic cat qubits stabilized with a driven two-photon dissipation are systems with exponentially biased noise, opening the door to low-overhead, fault-tolerant and universal quantum computing. However, current gate proposals for such qubits induce substantial noise of the unprotected type, whose poor scaling with the relevant experimental parameters limits their practical use. In this work, we provide a new perspective on dissipative cat qubits by reconsidering the reservoir mode used to engineer the tailored two-photon dissipation, and show how it can be leveraged to mitigate gate-induced errors. Doing so, we introduce four new designs of high-fidelity and bias-preserving cat qubit gates, and compare them to the prevalent gate methods. These four designs should give a broad overview of gate engineering for dissipative systems with different and complementary ideas. In particular, we propose both already achievable low-error gate designs and longer-term implementations.

As the field of quantum computing grows, novel algorithms which take advantage of quantum phenomena need to be developed. As we are currently in the NISQ (noisy intermediate scale quantum) era, quantum algorithm researchers cannot reliably test their algorithms on real quantum hardware, which is still too limited. Instead, quantum computing simulators on classical computing systems are used. In the quantum circuit model, quantum bits (qubits) are operated on by quantum gates. A quantum circuit is a sequence of such quantum gates operating on some number of qubits. A quantum gate applied to a qubit can be controlled by other qubits in the circuit. This applies the gate only to the states which satisfy the required control qubit state. We particularly target FPGAs as our main simulation platform, as these offer potential energy savings when compared to running simulations on CPUs/GPUs. In this work, we present a memory access pattern to optimise the number of iterations that need to be scheduled to execute a quantum gate such that only the iterations which access the required pairs (determined according to the control qubits imposed on the gate) are scheduled. We show that this approach results in a significant reduction in the time required to simulate a gate for each added control qubit. We also show that this approach benefits the simulation time on FPGAs more than CPUs and GPUs and allows to outperform both CPU and GPU platforms in terms of energy efficiency, which is the main factor for scalability of the simulations.

Conventional semiconductor-based integrated circuits are gradually approaching fundamental scaling limits. Many prospective solutions have recently emerged to supplement or replace both the technology on which basic devices are built and the architecture of data processing. Neuromorphic circuits are a promising approach to computing where techniques used by the brain to achieve high efficiency are exploited. Many existing neuromorphic circuits rely on unconventional and useful properties of novel technologies to better mimic the operation of the brain. One such technology is single flux quantum (SFQ) logic -- a cryogenic superconductive technology in which the data are represented by quanta of magnetic flux (fluxons) produced and processed by Josephson junctions embedded within inductive loops. The movement of a fluxon within a circuit produces a quantized voltage pulse (SFQ pulse), resembling a neuronal spiking event. These circuits routinely operate at clock frequencies of tens to hundreds of gigahertz, making SFQ a natural technology for processing high frequency pulse trains. Prior proposals for SFQ neural networks often require energy-expensive fluxon conversions, involve heterogeneous technologies, or exclusively focus on device level behavior. In this paper, a design methodology for deep single flux quantum neuromorphic networks is presented. Synaptic and neuronal circuits based on SFQ technology are presented and characterized. Based on these primitives, a deep neuromorphic XOR network is evaluated as a case study, both at the architectural and circuit levels, achieving wide classification margins. The proposed methodology does not employ unconventional superconductive devices or semiconductor transistors. The resulting networks are tunable by an external current, making this proposed system an effective approach for scalable cryogenic neuromorphic computing.

Algorithm learning is a core problem in artificial intelligence with significant implications on automation level that can be achieved by machines. Recently deep learning methods are emerging for synthesizing an algorithm from its input-output examples, the most successful being the Neural GPU, capable of learning multiplication. We present several improvements to the Neural GPU that substantially reduces training time and improves generalization. We introduce a new technique - hard nonlinearities with saturation costs- that has general applicability. We also introduce a technique of diagonal gates that can be applied to active-memory models. The proposed architecture is the first capable of learning decimal multiplication end-to-end.

We present CRUXEval (Code Reasoning, Understanding, and eXecution Evaluation), a benchmark consisting of 800 Python functions (3-13 lines). Each function comes with an input-output pair, leading to two natural tasks: input prediction and output prediction. First, we propose a generic recipe for generating our execution benchmark which can be used to create future variation of the benchmark. Second, we evaluate twenty code models on our benchmark and discover that many recent high-scoring models on HumanEval do not show the same improvements on our benchmark. Third, we show that simple CoT and fine-tuning schemes can improve performance on our benchmark but remain far from solving it. The best setup, GPT-4 with chain of thought (CoT), achieves a pass@1 of 75% and 81% on input and output prediction, respectively. In contrast, Code Llama 34B achieves a pass@1 of 50% and 46% on input and output prediction, highlighting the gap between open and closed source models. As no model is close to acing CRUXEval, we provide examples of consistent GPT-4 failures on simple programs as a lens into its code reasoning capabilities and areas for improvement.

In this work, we provide an overview of circuits for quantum computing. We introduce gates used in quantum computation and then present resource cost measurements used to evaluate circuits made from these gates. We then illustrate how the gates shown are then combined into quantum circuits for basic arithmetic functions. Architectures for addition, subtraction, multiplication, and division are shown. We demonstrate how to calculate the resource costs of quantum circuits. We conclude this overview with by illustrating an application of the elementary quantum circuits for the image rotation operation.

Efficiently compiling quantum operations remains a major bottleneck in scaling quantum computing. Today's state-of-the-art methods achieve low compilation error by combining search algorithms with gradient-based parameter optimization, but they incur long runtimes and require multiple calls to quantum hardware or expensive classical simulations, making their scaling prohibitive. Recently, machine-learning models have emerged as an alternative, though they are currently restricted to discrete gate sets. Here, we introduce a multimodal denoising diffusion model that simultaneously generates a circuit's structure and its continuous parameters for compiling a target unitary. It leverages two independent diffusion processes, one for discrete gate selection and one for parameter prediction. We benchmark the model over different experiments, analyzing the method's accuracy across varying qubit counts, circuit depths, and proportions of parameterized gates. Finally, by exploiting its rapid circuit generation, we create large datasets of circuits for particular operations and use these to extract valuable heuristics that can help us discover new insights into quantum circuit synthesis.

Quantum generative modeling using quantum circuit Born machines (QCBMs) shows promising potential for practical quantum advantage. However, discovering ansätze that are both expressive and hardware-efficient remains a key challenge, particularly on noisy intermediate-scale quantum (NISQ) devices. In this work, we introduce a prompt-based framework that leverages large language models (LLMs) to generate hardware-aware QCBM architectures. Prompts are conditioned on qubit connectivity, gate error rates, and hardware topology, while iterative feedback, including Kullback-Leibler (KL) divergence, circuit depth, and validity, is used to refine the circuits. We evaluate our method on a financial modeling task involving daily changes in Japanese government bond (JGB) interest rates. Our results show that the LLM-generated ansätze are significantly shallower and achieve superior generative performance compared to the standard baseline when executed on real IBM quantum hardware using 12 qubits. These findings demonstrate the practical utility of LLM-driven quantum architecture search and highlight a promising path toward robust, deployable generative models for near-term quantum devices.

QSE is emerging as a critical discipline to make quantum computing accessible to a broader developer community; however, most quantum development environments still require developers to engage with low-level details across the software stack - including problem encoding, circuit construction, algorithm configuration, hardware selection, and result interpretation - making them difficult for classical software engineers to use. To bridge this gap, we present C2|Q>, a hardware-agnostic quantum software development framework that translates specific types of classical specifications into quantum-executable programs while preserving methodological rigor. The framework applies modular SE principles by classifying the workflow into three core modules: an encoder that classifies problems, produces Quantum-Compatible Formats, and constructs quantum circuits, a deployment module that generates circuits and recommends hardware based on fidelity, runtime, and cost, and a decoder that interprets quantum outputs into classical solutions. In evaluation, the encoder module achieved a 93.8% completion rate, the hardware recommendation module consistently selected the appropriate quantum devices for workloads scaling up to 56 qubits. End-to-end experiments on 434 Python programs and 100 JSON problem instances show that the full C2|Q> workflow executes reliably on simulators and can be deployed successfully on representative real quantum hardware, with empirical runs limited to small- and medium-sized instances consistent with current NISQ capabilities. These results indicate that C2|Q> lowers the entry barrier to quantum software development by providing a reproducible, extensible toolchain that connects classical specifications to quantum execution. The open-source implementation of C2|Q> is available at https://github.com/C2-Q/C2Q and as a Python package at https://pypi.org/project/c2q-framework/.

We introduce a quantum neural network, QNN, that can represent labeled data, classical or quantum, and be trained by supervised learning. The quantum circuit consists of a sequence of parameter dependent unitary transformations which acts on an input quantum state. For binary classification a single Pauli operator is measured on a designated readout qubit. The measured output is the quantum neural network's predictor of the binary label of the input state. First we look at classifying classical data sets which consist of n-bit strings with binary labels. The input quantum state is an n-bit computational basis state corresponding to a sample string. We show how to design a circuit made from two qubit unitaries that can correctly represent the label of any Boolean function of n bits. For certain label functions the circuit is exponentially long. We introduce parameter dependent unitaries that can be adapted by supervised learning of labeled data. We study an example of real world data consisting of downsampled images of handwritten digits each of which has been labeled as one of two distinct digits. We show through classical simulation that parameters can be found that allow the QNN to learn to correctly distinguish the two data sets. We then discuss presenting the data as quantum superpositions of computational basis states corresponding to different label values. Here we show through simulation that learning is possible. We consider using our QNN to learn the label of a general quantum state. By example we show that this can be done. Our work is exploratory and relies on the classical simulation of small quantum systems. The QNN proposed here was designed with near-term quantum processors in mind. Therefore it will be possible to run this QNN on a near term gate model quantum computer where its power can be explored beyond what can be explored with simulation.

We present an experimental implementation of the multiplayer Quantum Volunteer's Dilemma on noisy intermediate-scale quantum (NISQ) hardware, executed on the ibm_kingston backend via Qiskit Runtime. The game is evaluated for N = 2 to 9 players under four transpiler optimization levels, with 20 independent repetitions per configuration and 2048 shots per circuit, including post-processing readout error correction via mthree. Target-state fidelity decays with system size but remains above 70% (corrected) through N = 9. With readout correction, the global average payoff reproduces the quantum theoretical benchmark exactly for N <= 6 and exceeds the classical Nash equilibrium across the full tested range. Optimization level 2 is selected as the reference configuration after gate count analysis reveals that levels 2 and 3 produce identical transpiled circuits, with level 2 achieving superior fidelity stability. A Hamming distance analysis of raw measurement counts shows that single-qubit errors dominate at small N, with multi-qubit contributions growing beyond N = 6. A calibration-based digital twin captures global payoff trends but exhibits a linear fidelity decay profile that diverges from the hardware behavior at large N, exposing the limits of first-order independent per-qubit noise models. These results demonstrate that aggregate quantum advantage in multiplayer games is robust to NISQ noise conditions across the full tested range, while the practical observability of state-level advantage is constrained to N <= 8 under post-processed readout correction.

We propose a new method to ensure neural ordinary differential equations (ODEs) satisfy output specifications by using invariance set propagation. Our approach uses a class of control barrier functions to transform output specifications into constraints on the parameters and inputs of the learning system. This setup allows us to achieve output specification guarantees simply by changing the constrained parameters/inputs both during training and inference. Moreover, we demonstrate that our invariance set propagation through data-controlled neural ODEs not only maintains generalization performance but also creates an additional degree of robustness by enabling causal manipulation of the system's parameters/inputs. We test our method on a series of representation learning tasks, including modeling physical dynamics and convexity portraits, as well as safe collision avoidance for autonomous vehicles.

Large language models (LLMs) have transformed code generation, yet their application in hardware design produces gate counts 38\%--1075\% higher than human designs. We present CircuitMind, a multi-agent framework that achieves human-competitive efficiency through three key innovations: syntax locking (constraining generation to basic logic gates), retrieval-augmented generation (enabling knowledge-driven design), and dual-reward optimization (balancing correctness with efficiency). To evaluate our approach, we introduce TC-Bench, the first gate-level benchmark harnessing collective intelligence from the TuringComplete ecosystem -- a competitive circuit design platform with hundreds of thousands of players. Experiments show CircuitMind enables 55.6\% of model implementations to match or exceed top-tier human experts in composite efficiency metrics. Most remarkably, our framework elevates the 14B Phi-4 model to outperform both GPT-4o mini and Gemini 2.0 Flash, achieving efficiency comparable to the top 25\% of human experts without requiring specialized training. These innovations establish a new paradigm for hardware optimization where collaborative AI systems leverage collective human expertise to achieve optimal circuit designs. Our model, data, and code are open-source at https://github.com/BUAA-CLab/CircuitMind.

Understanding the structure and function of circuits is crucial for electronic design automation (EDA). Circuits can be formulated as And-Inverter graphs (AIGs), enabling efficient implementation of representation learning through graph neural networks (GNNs). Masked modeling paradigms have been proven effective in graph representation learning. However, masking augmentation to original circuits will destroy their logical equivalence, which is unsuitable for circuit representation learning. Moreover, existing masked modeling paradigms often prioritize structural information at the expense of abstract information such as circuit function. To address these limitations, we introduce MGVGA, a novel constrained masked modeling paradigm incorporating masked gate modeling (MGM) and Verilog-AIG alignment (VGA). Specifically, MGM preserves logical equivalence by masking gates in the latent space rather than in the original circuits, subsequently reconstructing the attributes of these masked gates. Meanwhile, large language models (LLMs) have demonstrated an excellent understanding of the Verilog code functionality. Building upon this capability, VGA performs masking operations on original circuits and reconstructs masked gates under the constraints of equivalent Verilog codes, enabling GNNs to learn circuit functions from LLMs. We evaluate MGVGA on various logic synthesis tasks for EDA and show the superior performance of MGVGA compared to previous state-of-the-art methods. Our code is available at https://github.com/wuhy68/MGVGA.

Can Large Language Models (LLMs) understand and reason about quantum operators? Despite their remarkable capabilities in mathematics and symbolic reasoning, LLMs remain inherently blind to quantum representations such as unitary matrices. In this work, we take a step toward bridging this gap by introducing an approach that maps unitary operators into the latent space of an LLM, enabling unified modeling over quantum and linguistic inputs. We instantiate this idea on Clifford+T circuit synthesis over a Pauli rotation gate set, where our model achieves results competitive with state-of-the-art methods and scales consistently with training data, with no signs of saturation. Our approach further enables language-conditioned synthesis, allowing gate constraints unseen during training to be specified directly in natural language. This work suggests a path toward quantum--aware foundation models that can natively interpret and reason about quantum operations, which could have broader implications reaching across quantum compilation and algorithm discovery.

We propose a novel interpretation technique to explain the behavior of structured output models, which learn mappings between an input vector to a set of output variables simultaneously. Because of the complex relationship between the computational path of output variables in structured models, a feature can affect the value of output through other ones. We focus on one of the outputs as the target and try to find the most important features utilized by the structured model to decide on the target in each locality of the input space. In this paper, we assume an arbitrary structured output model is available as a black box and argue how considering the correlations between output variables can improve the explanation performance. The goal is to train a function as an interpreter for the target output variable over the input space. We introduce an energy-based training process for the interpreter function, which effectively considers the structural information incorporated into the model to be explained. The effectiveness of the proposed method is confirmed using a variety of simulated and real data sets.

The Mixture-of-Experts (MoE) architecture is showing promising results in improving parameter sharing in multi-task learning (MTL) and in scaling high-capacity neural networks. State-of-the-art MoE models use a trainable sparse gate to select a subset of the experts for each input example. While conceptually appealing, existing sparse gates, such as Top-k, are not smooth. The lack of smoothness can lead to convergence and statistical performance issues when training with gradient-based methods. In this paper, we develop DSelect-k: a continuously differentiable and sparse gate for MoE, based on a novel binary encoding formulation. The gate can be trained using first-order methods, such as stochastic gradient descent, and offers explicit control over the number of experts to select. We demonstrate the effectiveness of DSelect-k on both synthetic and real MTL datasets with up to 128 tasks. Our experiments indicate that DSelect-k can achieve statistically significant improvements in prediction and expert selection over popular MoE gates. Notably, on a real-world, large-scale recommender system, DSelect-k achieves over 22% improvement in predictive performance compared to Top-k. We provide an open-source implementation of DSelect-k.

We present a deterministic framework for preparing an arbitrary three-qubit pure state. To leverage entanglement structure in the state-preparation task, we classify three-qubit pure states into five types with respect to a 1|2 bipartition. Given a target state specified by its amplitudes, we provide concrete criteria and concurrence-based tests that determine its type. For each type, we derive an explicit circuit template composed of elementary single-qubit rotations and CNOT gates, with gate parameters determined systematically from the Schmidt decomposition. The full construction is described step by step from the target amplitudes, with no procedural ambiguity. As an application, we further group frequently encountered three-qubit pure states in quantum information into four classes and provide an explicit circuit for each class. Compared with prior approaches, our circuits are designed for practical use: they admit a direct algorithmic instantiation, use only CNOT gates between adjacent qubits, and for certain classes achieve smaller gate counts and circuit depth.

In image processing, the amount of data to be processed grows rapidly, in particular when imaging methods yield images of more than two dimensions or time series of images. Thus, efficient processing is a challenge, as data sizes may push even supercomputers to their limits. Quantum image processing promises to encode images with logarithmically less qubits than classical pixels in the image. In theory, this is a huge progress, but so far not many experiments have been conducted in practice, in particular on real backends. Often, the precise conversion of classical data to quantum states, the exact implementation, and the interpretation of the measurements in the classical context are challenging. We investigate these practical questions in this paper. In particular, we study the feasibility of the Flexible Representation of Quantum Images (FRQI). Furthermore, we check experimentally what is the limit in the current noisy intermediate-scale quantum era, i.e. up to which image size an image can be encoded, both on simulators and on real backends. Finally, we propose a method for simplifying the circuits needed for the FRQI. With our alteration, the number of gates needed, especially of the error-prone controlled-NOT gates, can be reduced. As a consequence, the size of manageable images increases.

In this paper, we describe a design of a mixed signal circuit for a binary neuron (a.k.a perceptron, threshold logic gate) and a methodology for automatically embedding such cells in ASICs. The binary neuron, referred to as an FTL (flash threshold logic) uses floating gate or flash transistors whose threshold voltages serve as a proxy for the weights of the neuron. Algorithms for mapping the weights to the flash transistor threshold voltages are presented. The threshold voltages are determined to maximize both the robustness of the cell and its speed. The performance, power, and area of a single FTL cell are shown to be significantly smaller (79.4%), consume less power (61.6%), and operate faster (40.3%) compared to conventional CMOS logic equivalents. Also included are the architecture and the algorithms to program the flash devices of an FTL. The FTL cells are implemented as standard cells, and are designed to allow commercial synthesis and P&R tools to automatically use them in synthesis of ASICs. Substantial reductions in area and power without sacrificing performance are demonstrated on several ASIC benchmarks by the automatic embedding of FTL cells. The paper also demonstrates how FTL cells can be used for fixing timing errors after fabrication.

Modular quantum processors require a compiler to reason about two resources at the same time: local device connectivity and communication across QPUs. A mapping that is acceptable on a single coupling graph may be unsuitable for a modular machine if it creates excessive cross-QPU traffic, concentrates that traffic on a small number of interconnect links, or assigns many boundary qubits to a QPU with few communication ports. This paper presents QuPort, a Python and Qiskit-based compilation framework that studies this setting through an explicit three-level model: a weighted logical interaction graph, a directed physical coupling map, and an undirected QPU-level interconnect graph. The main partitioning method, TPCCAP, optimizes the implemented objective formed by weighted cut distance, communication-port overflow, and routed link-load congestion. The framework also includes heavy-edge clustering, balanced greedy partitioning, simulated-annealing refinement, communication-port-aware layout, extraction of remote two-qubit operations, local-only routing of per-QPU circuits, and topology-aware schedule estimation. The model is a compiler-level abstraction. It does not claim a calibrated hardware runtime or an implementation of a physical remote-gate protocol.

Parameter-efficient fine-tuning (PEFT) methods such as adapt large pretrained models by adding small weight-space updates. While effective, weight deltas are hard to interpret mechanistically, and they do not directly expose which internal computations are reused versus bypassed for a new task. We explore an alternative view inspired by neuromodulation: adaptation as a change in mode -- selecting and rescaling existing computations -- rather than rewriting the underlying weights. We propose , a simple activation-space PEFT technique that freezes base weights and learns per-neuron thresholds and gains. During training, a smooth gate decides whether a neuron's activation participates; at inference the gate can be hardened to yield explicit conditional computation and neuron-level attributions. As a proof of concept, we study ``mode specialization'' on MNIST (0^circ) versus rotated MNIST (45^circ). We pretrain a small MLP on a 50/50 mixture (foundation), freeze its weights, and then specialize to the rotated mode using . Across seeds, improves rotated accuracy over the frozen baseline while using only a few hundred trainable parameters per layer, and exhibits partial activation sparsity (a minority of units strongly active). Compared to , trades some accuracy for substantially fewer trainable parameters and a more interpretable ``which-neurons-fire'' mechanism. We discuss limitations, including reduced expressivity when the frozen base lacks features needed for the target mode.

Deployed language models must produce outputs that are both correct and format-compliant. We study this structured-output reliability gap using two mathematical benchmarks -- GSM8K and MATH -- as a controlled testbed: ground truth is unambiguous and the output contract is strict (JSON with required fields). We evaluate three 7-9B models under five prompting strategies and report output accuracy -- the joint event of mathematical correctness and valid JSON structure -- as the primary metric. A systematic format failure emerges: NAIVE prompting (no system prompt) achieves up to 85% task accuracy on GSM8K but 0% output accuracy across all models and datasets. REFERENCE prompting (a minimal hand-written JSON format prompt) fares little better, yielding 0% output accuracy for two of four models tested. Constrained decoding enforces syntactic validity but incurs 3.6x-8.2x latency overhead and in several settings degrades task performance substantially. To overcome this limitation, we developed AloLab, an iterative system-prompt optimizer (meta-agent: Claude Sonnet 4.5) requiring only black-box API access to the target model; it reaches 84-87% output accuracy on GSM8K and 34-40% on MATH across five independent runs per model, with 29/30 paired McNemar comparisons against the best static prompt significant at p < 0.05, at near-NAIVE inference latency and without model fine-tuning. The same format failure extends to GPT-4o (OpenAI, 2024), a proprietary closed-source model: REFERENCE achieves 0% output accuracy due to systematic markdown-fence wrapping, while AloLab reaches 95.2% [94.8, 95.6]. An ablation replacing the Sonnet 4.5 meta-agent with Claude 3 Haiku reduces mean output accuracy to 61.0% and increases run-to-run standard deviation from <1 pp to 21.8 pp, confirming that meta-agent capability is a primary driver of optimization quality.

As giant dense models advance quality but require large amounts of GPU budgets for training, the sparsely gated Mixture-of-Experts (MoE), a kind of conditional computation architecture, is proposed to scale models while keeping their computation constant. Specifically, the input tokens are routed by the gate network and only activates part of the expert network. Existing MoE training systems only support part of mainstream MoE models (e.g. Top k) training under expensive high-bandwidth GPU clusters. In this paper, we present HetuMoE, a high-performance large-scale sparse MoE training system built on Hetu. HetuMoE provides multiple gating strategies and efficient GPU kernel implementations. To further improve the training efficiency on commodity GPU clusters (e.g, with only 1 NiC), we introduce the hierarchical AllToAll communication that combines hierarchical networks and aggregating messages. Compared with existing state-of-the-art MoE systems, HetuMoE obtains at least 15% speedup. Specifically, HetuMoE outperforms DeepSpeed-MoE up to 8.1x under the switch gate with a batch size of 32. Our code is available at: https://github.com/PKU-DAIR/Hetu.